Project

General

Profile

EC20 » History » Version 9

laforge, 10/02/2016 11:17 AM
appsboot.mbn info

1 1 zecke
h1. Wiki
2
3 3 zecke
h2. EC20
4
5
Seems to be a MDM9615 + MSM9615. Linux seems to be in charge of things.
6
7
h3. How does it work?
8
9 1 zecke
If on Host-PC I have ttyUSB3.. and I type AT. How does it end up at the modem? On the Linux side there is @atfwd_daemon@ that registers with a local ril daemon but how is USB connected. Who is bouncing things back to it or is Linux forwarding everything..
10 8 laforge
11
* the USB gadget (client) is entirely managed by the Linux on the Cortex-A5.
12
* the individual gadgets are implemented by drivers like f_diag.c or f_serial.c
13
* @f_serial.c@ seems to be able to connect each virtual serial port to a number of different transports:
14
** xport_tty (/dev/ttyGS* device to userspace using @u_serial.c@)
15
** xport_sdio (forwarding via SDIO using @u_sdio.c@)
16
** xport_smd (fowarding via shared memory to different CPU core using @u_smd.c@)
17
** xport_hsic (forwarding to different processor via GSIC using @u_{data,ctrl}_hsic.c@)
18
** xport_hsuart (forwarding via high-speed uart for DUN/RMNET via @u_data_hsuart.c@)
19
20
21 3 zecke
22
h3. Power management
23
24
Sleep/Power off seem to be "intercepted" by @atfwd_daemon@ that can execute "echo mem > /sys/power/state". Let's explore other options for wakeup. Is there a RTC?
25
26
27
h3. Firmware updates with FOTA
28
29
APN for OTA is configured separately on UC20, assumingly the same applies for EC20. A update.zip will be stored on the "cache" partition and it looks like the recovery system will be booted. I guess that then the reocvery system will unpack the update.zip and flash the partitions.
30
31
32
33
h3. Debugging with ADB
34
35 1 zecke
Switching on adb (or fastboot or debug to NMEA console)
36
37
<pre>
38
AT+QLINUXCMD="/usr/bin/usb_uartdiag"
39
AT+QFASTBOOT
40
AT+QLINUXCMD="echo foo > /dev/ttyGS0"
41 3 zecke
...
42
43
adb shell
44
# /
45 1 zecke
</pre>
46
47 3 zecke
@/usr/bin/usb_uartdig@ sends "endpoints" to a sysfs file
48 1 zecke
49 3 zecke
50 2 zecke
Changing qcserial.c to have adb and ttyUSBs.. Holger wants to upstream it after 32C3.
51 1 zecke
52
<pre>
53
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
54
index 51da652..2d8d09e 100644
55
--- a/drivers/usb/serial/qcserial.c
56
+++ b/drivers/usb/serial/qcserial.c
57
@@ -176,8 +176,9 @@ static const struct usb_device_id id_table[] = {
58
 };
59
 MODULE_DEVICE_TABLE(usb, id_table);
60
 
61
-static int handle_quectel_ec20(struct device *dev, int ifnum)
62
+static int handle_quectel_ec20(struct usb_device *usbdev, int ifnum)
63
 {
64
+       struct device *dev = &usbdev->dev;
65
        int altsetting = 0;
66
 
67
        /*
68
@@ -201,10 +202,12 @@ static int handle_quectel_ec20(struct device *dev, int ifnum)
69
                dev_dbg(dev, "Quectel EC20 Modem port found\n");
70
                break;
71
        case 4:
72
-       case 5:
73
                /* Don't claim the QMI/net or debug interface */
74
                altsetting = -1;
75
                break;
76
+       case 5:
77
+               usb_set_interface(usbdev, ifnum, 0);
78
+               altsetting = -1;
79
        }
80
 
81
        return altsetting;
82
@@ -285,7 +288,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
83
        case QCSERIAL_G2K:
84
                /* handle non-standard layouts */
85
                if ((nintf == 5 || nintf == 6) && id->idProduct == QUECTEL_EC20_PID) {
86
-                       altsetting = handle_quectel_ec20(dev, ifnum);
87
+                       altsetting = handle_quectel_ec20(serial->dev, ifnum);
88
                        goto done;
89
                }
90
 
91
</pre>
92
93
94
<pre>
95
Not working userspace code
96
97
#include <libusb.h>
98
99
#include <stdio.h>
100
#include <stdlib.h>
101
102
int main(int argc, char **argv)
103
{
104
	struct libusb_device_handle *devh;
105
	int rc;
106
107
	rc = libusb_init(NULL);
108
	printf("%d\n", rc);
109
110
	devh = libusb_open_device_with_vid_pid(NULL, 0x05c6, 0x9215);
111
	if (!devh) {
112
		abort();
113
	}
114
	rc = libusb_claim_interface(devh, 5);
115
	printf("%d\n", rc);
116
	//rc = libusb_detach_kernel_driver(devh, 5);
117
	//printf("%d\n", rc);
118
	rc = libusb_set_interface_alt_setting(devh, 5, 0);
119
	printf("%d\n", rc);     ====> currently prints -5 but is like the one above..
120
	return EXIT_FAILURE;
121
}
122 4 zecke
</pre>
123 3 zecke
124 9 laforge
h3. fastboot / flashing
125
126
The appsboot.mbn we know of (sha1sum 8d47d7e8ca8a15ff089994d87e36b531f36f907a) has no signature and no certificate chain.  This information is established by looking at the image header, whose formta is "documented" in https://android.googlesource.com/kernel/lk/+/caf/master/target/mdm9615/tools/mkheader.c
127
128
129 5 zecke
h3. full lsof output
130 1 zecke
131 6 zecke
[[LsOfOutput]]
132 5 zecke
133 3 zecke
h3. ps
134 1 zecke
135 4 zecke
<pre>
136 3 zecke
/ # ps
137
PID   USER     TIME   COMMAND
138
   1 root       0:01 init [5]
139
   2 root       0:00 [kthreadd]
140
   3 root       0:00 [ksoftirqd/0]
141
   4 root       0:00 [kworker/0:0]
142
   6 root       0:00 [khelper]
143
   7 root       0:00 [netns]
144
   8 root       0:00 [sync_supers]
145
   9 root       0:00 [bdi-default]
146
  10 root       0:00 [kblockd]
147
  11 root       0:00 [khubd]
148
  12 root       0:00 [kworker/0:1]
149
  13 root       0:00 [modem_notifier]
150
  14 root       0:00 [smd_channel_clo]
151
  15 root       0:00 [smsm_cb_wq]
152
  16 root       0:00 [kworker/u:1]
153
  17 root       0:00 [qmi]
154
  18 root       0:00 [nmea]
155
  19 root       0:00 [RPCRPY_CNTL]
156
  20 root       0:00 [IPCRTR]
157
  21 root       0:00 [msm_ipc_router]
158
  22 root       0:00 [ipc_rtr_smd_rpc]
159
  23 root       0:00 [kworker/u:2]
160
  24 root       0:00 [apr_driver]
161
  25 root       0:00 [kswapd0]
162
  26 root       0:00 [ipc_rtr_q6_ipcr]
163
  27 root       0:00 [fsnotify_mark]
164
  28 root       0:00 [crypto]
165
  40 root       0:00 [quec_dtr]
166
  41 root       0:00 [mtdblock0]
167
  42 root       0:00 [mtdblock1]
168
  43 root       0:00 [mtdblock2]
169
  44 root       0:00 [mtdblock3]
170
  45 root       0:00 [mtdblock4]
171
  46 root       0:00 [mtdblock5]
172
  47 root       0:00 [mtdblock6]
173
  48 root       0:00 [mtdblock7]
174
  49 root       0:00 [mtdblock8]
175
  50 root       0:00 [mtdblock9]
176
  51 root       0:00 [mtdblock10]
177
  52 root       0:00 [mtdblock11]
178
  53 root       0:00 [mtdblock12]
179
  54 root       0:00 [mtdblock13]
180
  55 root       0:00 [mtdblock14]
181
  56 root       0:00 [mtdblock15]
182
  57 root       0:00 [spi_qsd.0]
183
  58 root       0:00 [mhsic_wq]
184
  59 root       0:00 [k_rmnet_mux_wor]
185
  60 root       0:00 [f_mtp]
186
  61 root       0:00 [file-storage]
187
  63 root       0:00 [uether]
188
  64 root       0:00 [diag_wq]
189
  65 root       0:00 [diag_cntl_wq]
190
  66 root       0:00 [iewq]
191
  67 root       0:00 [irq/368-msm-sdc]
192
  68 root       0:00 [usb_bam_wq]
193
  69 root       0:00 [bam_dmux_rx]
194
  70 root       0:00 [bam_dmux_tx]
195
  71 root       0:00 [deferwq]
196
  72 root       0:00 [yaffs-bg-1]
197
  92 root       0:00 [k_gserial]
198
  93 root       0:00 [k_gsmd]
199
  94 root       0:00 [k_gbam]
200
  95 root       0:00 [gsmd_ctrl]
201
 129 root       0:00 [yaffs-bg-1]
202
 140 root       0:00 [yaffs-bg-1]
203
 183 root       0:00 /sbin/adbd
204
 205 root       0:00 /usr/bin/time_daemon
205
 208 root       0:00 /usr/bin/wapfotadaemon
206
 211 root       0:00 /usr/bin/wapfotadaemon
207
 212 root       0:00 sh -c qmi_simple_ril_test modem_port=rmnet0 input=/usr/bi
208
 217 root       0:00 qmi_simple_ril_test modem_port=rmnet0 input=/usr/bin/comm
209
 224 nobody     0:00 /usr/bin/dnsmasq -7 /etc/dnsmasq.d
210
 227 root       0:00 qti
211
 231 root       0:00 /sbin/syslogd -n -C64 -m 20
212
 240 root       0:00 /usr/bin/diagrebootapp
213
 246 root       0:00 /usr/bin/atfwd_daemon
214
 256 root       0:00 /usr/bin/qmuxd
215
 272 root       0:00 /bin/sh /usr/sbin/restart_mbimd
216
 275 root       0:00 /usr/bin/netmgrd -u /etc/udhcpc.d/udhcpc.script
217
 280 root       0:00 /usr/bin/qmi_shutdown_modem
218
 284 root       0:03 /usr/bin/quectel_daemon
219
 304 root       0:00 /usr/bin/mbimd
220
 346 root       0:00 /sbin/reboot-daemon
221
 347 root       0:00 /sbin/getty -L ttyHSL0 115200 console
222
 364 root       0:00 /bin/sh /usr/bin/nmea_demon.sh ttyGS0
223
 367 root       0:00 quec_bridge /dev/nmea /dev/ttyGS0 s
224
 439 root       0:01 alsaucm_test
225
 453 root       0:00 [kworker/u:0]
226
 455 root       0:00 [kworker/u:3]
227
 457 root       0:00 [kworker/0:2]
228
 463 root       0:00 [flush-31:15]
229
 473 root       0:00 /bin/sh -
230
 477 root       0:00 [flush-31:14]
231
 478 root       0:00 ps
232 1 zecke
/ # 
233 4 zecke
</pre>
234 3 zecke
235
h3. dmesg
236 1 zecke
237 4 zecke
<pre>
238 3 zecke
/ # dmesg
239
[    0.000000]   Normal zone: 9266 pages, LIFO batch:1
240
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
241
[    0.000000] pcpu-alloc: [0] 0 
242
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9266
243
[    0.000000] Kernel command line: noinitrd root=/dev/mtdblock14 rw rootfstype=yaffs2 console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.serialno=MDM9615 androidboot.baseband=msm
244
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
245
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
246
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
247
[    0.000000] Memory: 15MB 22MB = 37MB total
248
[    0.000000] Memory: 29472k/29472k available, 9440k reserved, 0K highmem
249
[    0.000000] Virtual kernel memory layout:
250
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
251
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
252
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
253
[    0.000000]     vmalloc : 0xc6800000 - 0xfa000000   ( 824 MB)
254
[    0.000000]     lowmem  : 0xc0000000 - 0xc6700000   ( 103 MB)
255
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
256
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
257
[    0.000000]       .init : 0xc0008000 - 0xc0032000   ( 168 kB)
258
[    0.000000]       .text : 0xc0032000 - 0xc05ad1d8   (5613 kB)
259
[    0.000000]       .data : 0xc05ae000 - 0xc061ab38   ( 435 kB)
260
[    0.000000]        .bss : 0xc061ab78 - 0xc07cd050   (1738 kB)
261
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
262
[    0.000000] Preemptible hierarchical RCU implementation.
263
[    0.000000] NR_IRQS:681
264
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
265
[    0.000000] Console: colour dummy device 80x30
266
[    0.150190] Calibrating delay using timer specific routine.. 9.62 BogoMIPS (lpj=48102)
267
[    0.150221] pid_max: default: 32768 minimum: 301
268
[    0.150679] Mount-cache hash table entries: 512
269
[    0.151320] Initializing cgroup subsys debug
270
[    0.151350] Initializing cgroup subsys cpuacct
271
[    0.151381] Initializing cgroup subsys freezer
272
[    0.151442] CPU: Testing write buffer coherency: ok
273
[    0.157271] print_constraints: dummy: 
274
[    0.157668] NET: Registered protocol family 16
275
[    0.157820] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
276
[    0.158980] msm_rpm_init: RPM firmware 3.0.16842958
277
[    0.173203] pm8018_probe: PMIC revision 1: F3
278
[    0.173233] pm8018_probe: PMIC revision 2: 08
279
[    0.173233] pm8018_probe: PMIC version: PM8018 rev 2.1
280
[    0.173264] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
281
[    0.174240] pm_gpio_probe: OK: base=88, ngpio=6
282
[    0.174515] pm8xxx_mpp_probe: OK: base=94, ngpio=6
283
[    0.181962] cpufreq_table_init: CPU: 4 scaling frequencies supported.
284
[    0.186754] sps:REVISION of BAM 0xc6818000 is 0x5.
285
[    0.186784] sps:BAM 0x12244000 is registered.
286
[    0.187517] sps:sps is ready.
287
[    0.209034] bio: create slab <bio-0> at 0
288
[    0.209797] ION heap vmalloc created
289
[    0.209827] ION heap iommu created
290
[    0.209858] ION heap audio created at 46e01000 with size af000
291
[    0.210254] pm8xxx_pwm_probe: OK
292
[    0.210865] SCSI subsystem initialized
293
[    0.211048] usbcore: registered new interface driver usbfs
294
[    0.211200] usbcore: registered new interface driver hub
295
[    0.211414] usbcore: registered new device driver usb
296
[    0.212055] Registered led device: led:kb
297
[    0.212452] Advanced Linux Sound Architecture Driver Version 1.0.24.
298
[    0.213215] Switching to clocksource gp_timer
299
[    0.223134] NET: Registered protocol family 2
300
[    0.223378] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
301
[    0.223683] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
302
[    0.223744] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
303
[    0.223805] TCP: Hash tables configured (established 2048 bind 2048)
304
[    0.223836] TCP reno registered
305
[    0.223836] UDP hash table entries: 256 (order: 0, 4096 bytes)
306
[    0.223897] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
307
[    0.224629] NET: Registered protocol family 1
308
[    0.228231] Notify: smsm init
309
[    0.234518] NET: Registered protocol family 27
310
[    0.235373] apr_tal:Q6 Is Up
311
[    0.236593] modem_8960_init: modem fatal driver init'ed.
312
[    0.236868] lpass_fatal_init: lpass SSR driver init'ed.
313
[    0.237265] msm_rpm_log_probe: OK
314
[    0.249992] yaffs: yaffs built Jul 21 2016 14:54:39 Installing.
315
[    0.250053] msgmni has been set to 57
316
[    0.251701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
317
[    0.251732] io scheduler noop registered
318
[    0.251762] io scheduler deadline registered
319
[    0.251823] io scheduler cfq registered (default)
320
[    0.398596] apr_tal:Modem Is Up
321
[    0.409064] msm_serial: driver initialized
322
[    0.409217] msm_serial_hsl: detected port #0
323
[    0.409400] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16240000 (irq = 182) is a MSM
324
[    0.409522] msm_serial_hsl: console setup on port #0
325
[    0.834030] console [ttyHSL0] enabled
326
[    0.853807] msm_serial_hsl: driver initialized
327
[    0.865649] brd: module loaded
328
[    0.871600] loop: module loaded
329
[    0.874347] init gpio to irq = 0
330
[    0.877002] init gpio to irq = 312
331
[    0.880329] quectel_power_manager_probe: OK ###############################
332
[    0.973874] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
333
[    0.979490] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
334
[    0.985533] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
335
[    0.991973] qup_i2c qup_i2c.0: I2C slave addr:0xd not connected
336
[    0.997894] failed to read wcd9xxx register
337
[    1.002044] tabla-i2c-core 0-000d: Codec read failed
338
[    1.006989] failed to read the wcd9xxx status
339
[    1.014649] tabla-i2c-core: probe of 0-000d failed with error -107
340
[    1.019807] probe for other slaves devices of tabla
341
[    1.024690] probe for other slaves devices of tabla
342
[    1.029513] probe for other slaves devices of tabla
343
[    1.034457] i2c-core: driver [tabla-i2c-core] using legacy suspend method
344
[    1.041141] i2c-core: driver [tabla-i2c-core] using legacy resume method
345
[    1.049137] SCSI Media Changer driver v0.25 
346
[    1.053197] msm_nand_probe: phys addr 0x1b400000 
347
[    1.057134] msm_nand_probe: dmac 0x3
348
[    1.060643] msm_nand_probe: allocated dma buffer at ffdfe000, dma_addr 46a40000
349
[    1.068121] ONFI probe : Found a nonONFI Compliant device 
350
[    1.073462] status: c00020
351
[    1.076087] nandid: 1590aac8 maker c8 device aa
352
[    1.080604] Found a supported NAND device
353
[    1.084602] NAND Controller ID : 0x4030
354
[    1.088386] NAND Device ID  : 0x1590aac8
355
[    1.092293] Buswidth : 8 Bits
356
[    1.095284] Density  : 256 MByte
357
[    1.098458] Pagesize : 2048 Bytes
358
[    1.101754] Erasesize: 131072 Bytes
359
[    1.105264] Oobsize  : 64 Bytes
360
[    1.108377] CFG0 Init  : 0xa8d408c0
361
[    1.111826] CFG1 Init  : 0x0004745c
362
[    1.115336] ECCBUFCFG  : 0x00000203
363
[    1.118785] Creating 16 MTD partitions on "msm_nand":
364
[    1.123851] 0x0000050c0000-0x000005b00000 : "boot"
365
[    1.130260] 0x000000140000-0x0000004a0000 : "sbl2"
366
[    1.135479] 0x0000004a0000-0x000000800000 : "rpm"
367
[    1.140485] 0x000000800000-0x000000d80000 : "efs2"
368
[    1.145643] 0x000000d80000-0x0000012e0000 : "dsp1"
369
[    1.150770] 0x0000012e0000-0x000001d20000 : "dsp3"
370
[    1.156020] 0x000001d20000-0x000004fe0000 : "dsp2"
371
[    1.161147] 0x000004fe0000-0x0000050c0000 : "aboot"
372
[    1.166366] 0x000000000000-0x000000140000 : "mibib"
373
[    1.171493] 0x000005b00000-0x000009b60000 : "cache"
374
[    1.176773] 0x000009b60000-0x000009cc0000 : "misc"
375
[    1.181840] 0x000009cc0000-0x00000a720000 : "recovery"
376
[    1.187395] 0x00000a720000-0x00000a880000 : "fota"
377
[    1.192614] 0x00000a880000-0x00000bf60000 : "recoveryfs"
378
[    1.198382] 0x00000bf60000-0x00000d640000 : "system"
379
[    1.203754] 0x00000d640000-0x000010000000 : "userdata"
380
[    1.210407] rmnet_init: BAM devices[8]
381
[    1.218373] msm_otg msm_otg: msm_otg probe
382
[    1.221455] msm_otg msm_otg: failed to get phy_clk
383
[    1.226308] msm_otg msm_otg: OTG regs = c6828000
384
[    1.232595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
385
[    1.251121] Initializing USB Mass Storage driver...
386
[    1.255211] usbcore: registered new interface driver usb-storage
387
[    1.260949] USB Mass Storage support registered.
388
[    1.265679] usbcore: registered new interface driver ums-alauda
389
[    1.271570] usbcore: registered new interface driver ums-cypress
390
[    1.277552] usbcore: registered new interface driver ums-datafab
391
[    1.283503] usbcore: registered new interface driver ums-freecom
392
[    1.289516] usbcore: registered new interface driver ums-isd200
393
[    1.295406] usbcore: registered new interface driver ums-jumpshot
394
[    1.301480] usbcore: registered new interface driver ums-karma
395
[    1.307309] usbcore: registered new interface driver ums-onetouch
396
[    1.313352] usbcore: registered new interface driver ums-sddr09
397
[    1.319304] usbcore: registered new interface driver ums-sddr55
398
[    1.325194] usbcore: registered new interface driver ums-usbat
399
[    1.330993] usbcore: registered new interface driver usb_ehset_test
400
[    1.337494] msm_hsic_peripheral msm_hsic_peripheral: HSIC Peripheral regs = c682a000
401
[    1.357912] msm_otg msm_otg: phy_reset: success
402
[    1.362368] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
403
[    1.367678] mbim_init: initialize 1 instances
404
[    1.372287] mbim_init: Initialized 1 ports
405
[    1.379429] rndis_qc_init: initialize rndis QC instance
406
[    1.384343] android_usb gadget: Mass Storage Function, version: 2009/09/11
407
[    1.390477] android_usb gadget: Number of LUNs=1
408
[    1.395147]  lun0: LUN: removable file: (no medium)
409
[    1.400457] android_usb gadget: android_usb ready
410
[    1.405005] msm_hsic_peripheral msm_hsic_peripheral: [ci13xxx_start] hw_ep_max = 32
411
[    1.412452] android_usb gadget: android_usb ready
412
[    1.417030] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_RESET_EVENT received
413
[    1.425423] msm_hsic_peripheral msm_hsic_peripheral: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
414
[    1.436105] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
415
[    1.443094] android_work: android_work: did not send uevent (0 0   (null))
416
[    1.450083] msm_hsic_peripheral msm_hsic_peripheral: HSIC-USB in low power mode
417
[    1.464764] couldn't get usb power supply
418
[    1.468976] diagchar initialized now
419
[    1.471814] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0
420
[    1.485365] diag: Invalid Msg type 12 proc 2
421
[    1.505631] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
422
[    1.511948] i2c /dev entries driver
423
[    1.518480] pm8xxx_adc_probe: failed to request pa_therm vreg with error -19
424
[    1.545551] pm8xxx_tm_probe: OK
425
[    1.547932] cpuidle: using governor ladder
426
[    1.551747] cpuidle: using governor menu
427
[    1.556508] mmc0: mci-version: 18
428
[    1.560048] mmc0: bam physical base=0x12182000
429
[    1.563467] mmc0: bam virtual base=0xc6830000
430
[    1.567892] sps:BAM 0x12182000 is registered.
431
[    1.571982] mmc0: BAM device registered. bam_handle=0xc63c5000
432
[    1.578116] sps:REVISION of BAM 0xc6830000 is 0x5.
433
[    1.583335] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
434
[    1.589195] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
435
[    1.597405] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,368 dma -1 dmacrcri -1
436
[    1.606439] mmc0: 8 bit data mode disabled
437
[    1.609674] mmc0: 4 bit data mode enabled
438
[    1.613490] mmc0: polling status mode disabled
439
[    1.618098] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
440
[    1.624324] mmc0: Slot eject status = 0
441
[    1.627376] mmc0: Power save feature enable = 1
442
[    1.631893] mmc0: SPS-BAM data transfer mode available
443
[    1.637295] mmc1: mci-version: 18
444
[    1.645383] mmc1: bam physical base=0x12142000
445
[    1.654753] mmc1: bam virtual base=0xc686c000
446
[    1.660125] sps:BAM 0x12142000 is registered.
447
[    1.668243] mmc1: BAM device registered. bam_handle=0xc581b200
448
[    1.678284] sps:REVISION of BAM 0xc686c000 is 0x5.
449
[    1.692659] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012142000 irq 129
450
[    1.703067] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012140800
451
[    1.712955] mmc1: No card detect facilities available
452
[    1.722295] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma -1 dmacrcri -1
453
[    1.734594] mmc1: 8 bit data mode disabled
454
[    1.742591] mmc1: 4 bit data mode enabled
455
[    1.750556] mmc1: polling status mode disabled
456
[    1.754616] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
457
[    1.759682] mmc1: Slot eject status = 0
458
[    1.763497] mmc1: Power save feature enable = 1
459
[    1.767984] mmc1: SPS-BAM data transfer mode available
460
[    1.774484] logger: created 256K log 'log_main'
461
[    1.778330] logger: created 256K log 'log_events'
462
[    1.782908] logger: created 256K log 'log_radio'
463
[    1.787669] logger: created 256K log 'log_system'
464
[    1.842575] voice_allocate_shared_memory: ION memory allocation failed
465
[    1.853502] msm_pcm_probe: dev name msm-voip-dsp
466
[    1.868213] msm_pcm_probe: dev name msm-host-pcm-voice
467
[    1.873340] msm_pcm_probe: dev name msm-pcm-dsp
468
[    1.877033] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
469
[    1.883198] mdm9615_audio_init: Interface Type = -1
470
[    1.887868] ALSA device list:
471
[    1.890126]   No soundcards found.
472
[    1.893392] Netfilter messages via NETLINK v0.30.
473
[    1.898214] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
474
[    1.904959] ip_set: protocol 6
475
[    1.907187] ip_tables: (C) 2000-2006 Netfilter Core Team
476
[    1.912620] TCP cubic registered
477
[    1.916954] NET: Registered protocol family 10
478
[    1.923332] ip6_tables: (C) 2000-2006 Netfilter Core Team
479
[    1.928094] NET: Registered protocol family 17
480
[    1.932153] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
481
[    1.939783] Registering SWP/SWPB emulation handler
482
[    1.947840] clock_late_init() disabled 42 unused clocks
483
[    1.955989] MSM Watchdog Initialized
484
[    1.958828] no pmic restart interrupt specified
485
[    1.964932] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:34:05 UTC (2045)
486
[    1.973172] yaffs: dev is 32505870 name is "mtdblock14" rw
487
[    1.977689] yaffs: passed flags ""
488
[    1.981016] yaffs: Attempting MTD mount of 31.14,"mtdblock14"
489
[    2.039401] yaffs: block 155 is bad
490
[    2.099435] sps:BAM 0x124c2000 is registered.
491
[    2.144208] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
492
[    3.018037] yaffs: yaffs_read_super: is_checkpointed 0
493
[    3.018129] VFS: Mounted root (yaffs2 filesystem) on device 31:14.
494
[    3.023805] Freeing init memory: 168K
495
[    3.319090] sps:BAM 0x12502000 is registered.
496
[    3.325194] enable_store: android_usb: already disabled
497
[    3.334014] usmd:register_sysctl_table success.
498
[    3.337982] frmnet_bind: RmNet(0) dual Speed, IN:ep8in OUT:ep5out
499
[    3.545734] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
500
[    3.551258] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
501
[    3.564596] android_work: android_work: did not send uevent (0 0   (null))
502
[    3.619960] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
503
[    3.625911] android_work: android_work: sent uevent USB_STATE=CONNECTED
504
[    3.631893] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
505
[    3.655241] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
506
[    3.726629] android_usb gadget: high speed config #1: android_usb
507
[    3.731848] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
508
[    3.738013] msm_otg msm_otg: Avail curr from USB = 500
509
[    3.743293] diag: USB connected
510
[    3.744575] sps:REVISION of BAM 0xc68b8000 is 0x5.
511
[    3.749855] android_work: android_work: sent uevent USB_STATE=CONNECTED
512
[    3.776468] diag: USB connected
513
[    3.834976] android_work: android_work: sent uevent USB_STATE=CONFIGURED
514
[    6.987578] yaffs: dev is 32505871 name is "mtdblock15" rw
515
[    6.992034] yaffs: passed flags ""
516
[    6.995513] yaffs: Attempting MTD mount of 31.15,"mtdblock15"
517
[    8.647001] yaffs: yaffs_read_super: is_checkpointed 0
518
[    8.682405] yaffs: dev is 32505865 name is "mtdblock9" rw
519
[    8.686983] yaffs: passed flags ""
520
[    8.690187] yaffs: Attempting MTD mount of 31.9,"mtdblock9"
521
[    8.692507] yaffs: yaffs_read_super: is_checkpointed 1
522
[    8.984709] adb_open
523
[    9.579856] yaffs: dev is 32505869 name is "mtdblock13" rw
524
[    9.590325] yaffs: passed flags ""
525
[    9.597192] yaffs: Attempting MTD mount of 31.13,"mtdblock13"
526
[    9.597222] yaffs: auto selecting yaffs2
527
[    9.676789] yaffs: yaffs_read_super: is_checkpointed 1
528
[    9.955012] mbim_open: Open mbim driver
529
[    9.959957] mbim_open: Lock mbim_dev->open_excl for open
530
[    9.971738] mbim_open: USB cable not connected
531
[    9.975553] mbim_open: Exit, mbim file opened
532
[   10.053410] smd_pkt_open: DATA9_CNTL open failed -19
533
[   10.085731] smd_pkt_open: DATA12_CNTL open failed -19
534
[   10.127941] smd_pkt_open: DATA13_CNTL open failed -19
535
[   10.175919] smd_pkt_open: DATA14_CNTL open failed -19
536
[   10.805707] qsmem_poll_timer_cb:67 Modem Msg received.
537
[   10.860521] nmea: smd opened
538
[   11.087746] dtr_smd_open smd_open_ret = 0(0 SUCCESS)
539
[   11.091744] DTR SMD EVENT OPEN
540
[   11.113016] buf:dtr_low-
541
[   11.115000] enter rt5616_modinit
542
[   11.125316] enter rt5616_i2c_probe
543
[   11.135571] enter rt5616_probe
544
[   11.137982] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
545
[   11.144239] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
546
[   11.150404] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
547
[   11.156874] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
548
[   11.178391] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
549
[   11.184098] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
550
[   11.193010] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
551
[   11.198687] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
552
[   11.204761] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
553
[   11.211597] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
554
[   11.217610] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
555
[   11.224019] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
556
[   11.230154] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
557
[   11.236593] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
558
[   11.242697] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
559
[   11.249290] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
560
[   11.255241] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
561
[   11.261742] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
562
[   11.267938] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
563
[   11.274408] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
564
[   11.280482] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
565
[   11.286952] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
566
[   11.292995] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
567
[   11.299496] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
568
[   11.305569] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
569
[   11.312314] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
570
[   11.318663] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
571
[   11.327697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
572
[   11.333801] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
573
[   11.343567] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
574
[   11.349641] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
575
[   11.356111] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
576
[   11.362185] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
577
[   11.368655] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
578
[   11.374790] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
579
[   11.381291] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
580
[   11.387456] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
581
[   11.393834] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
582
[   11.400244] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
583
[   11.407172] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
584
[   11.413215] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
585
[   11.420845] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
586
[   11.426552] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
587
[   11.432992] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
588
[   11.439127] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
589
[   11.445566] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
590
[   11.451854] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
591
[   11.458263] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
592
[   11.464306] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
593
[   11.470746] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
594
[   11.476911] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
595
[   11.483351] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
596
[   11.489485] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
597
[   11.495925] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
598
[   11.501999] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
599
[   11.509720] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
600
[   11.514939] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
601
[   11.521471] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
602
[   11.527575] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
603
[   11.534472] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
604
[   11.540088] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
605
[   11.546864] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
606
[   11.552662] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
607
[   11.559133] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
608
[   11.565206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
609
[   11.571799] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
610
[   11.577872] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
611
[   11.585502] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
612
[   11.590813] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
613
[   11.597192] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
614
[   11.603235] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
615
[   11.610102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
616
[   11.616023] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
617
[   11.622524] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
618
[   11.628536] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
619
[   11.634945] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
620
[   11.641049] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
621
[   11.647489] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
622
[   11.657652] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
623
[   11.663268] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
624
[   11.670318] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
625
[   11.676697] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
626
[   11.682191] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
627
[   11.688661] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
628
[   11.694674] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
629
[   11.701327] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
630
[   11.707279] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
631
[   11.713902] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
632
[   11.719945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
633
[   11.726323] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
634
[   11.732427] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
635
[   11.738989] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
636
[   11.744971] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
637
[   11.751838] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
638
[   11.757698] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
639
[   11.764169] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
640
[   11.770242] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
641
[   11.776743] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
642
[   11.782786] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
643
[   11.789317] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
644
[   11.795360] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
645
[   11.802105] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
646
[   11.808026] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
647
[   11.814497] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
648
[   11.820570] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
649
[   11.827102] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
650
[   11.833114] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
651
[   11.839676] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
652
[   11.845688] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
653
[   11.852372] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
654
[   11.858354] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
655
[   11.866809] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
656
[   11.872028] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
657
[   11.878498] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
658
[   11.884541] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
659
[   11.891103] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
660
[   11.897146] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
661
[   11.903555] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
662
[   11.909720] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
663
[   11.916191] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
664
[   11.922264] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
665
[   11.928795] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
666
[   11.934839] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
667
[   11.941339] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
668
[   11.947474] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
669
[   11.953914] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
670
[   11.960476] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
671
[   11.966519] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
672
[   11.972592] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
673
[   11.979093] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
674
[   11.985228] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
675
[   11.991698] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
676
[   11.997833] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
677
[   12.004272] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
678
[   12.010407] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
679
[   12.016847] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
680
[   12.022951] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
681
[   12.029452] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
682
[   12.035525] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
683
[   12.042026] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
684
[   12.048161] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
685
[   12.054600] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
686
[   12.061254] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
687
[   12.067266] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
688
[   12.073370] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
689
[   12.079993] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
690
[   12.085945] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:183
691
[   12.092385] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
692
[   12.098550] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
693
[   12.104959] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
694
[   12.111246] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
695
[   12.117564] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
696
[   12.123638] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
697
[   12.130138] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
698
[   12.136273] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
699
[   12.142713] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
700
[   12.148878] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
701
[   12.155318] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
702
[   12.161452] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
703
[   12.167892] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
704
[   12.173996] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
705
[   12.180894] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
706
[   12.187120] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
707
[   12.193071] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
708
[   12.199206] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
709
[   12.205646] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
710
[   12.213032] msm_dai_q6_dai_sec_auxpcm_probe
711
[   12.216297] msm_dai_q6_dai_sec_auxpcm_probe
712
[   12.224629] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:183
713
[   12.230276] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
714
[   12.236441] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
715
[   12.242820] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
716
[   12.248985] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
717
[   12.255424] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
718
[   12.261559] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
719
[   12.267999] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
720
[   12.274103] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
721
[   12.280604] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
722
[   12.286769] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
723
[   12.293178] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
724
[   12.299313] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
725
[   12.305753] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
726
[   12.311918] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
727
[   12.318358] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
728
[   12.324431] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
729
[   12.330932] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
730
[   12.337066] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:183
731
[   12.343537] qup_i2c qup_i2c.0: I2C slave addr:0x1b not connected
732
[   12.349916] asoc: null-codec-dai <-> MultiMedia1 mapping ok
733
[   12.357698] asoc: null-codec-dai <-> MultiMedia2 mapping ok
734
[   12.364748] asoc: null-codec-dai <-> CS-VOICE mapping ok
735
[   12.372012] asoc: null-codec-dai <-> VoIP mapping ok
736
[   12.378666] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
737
[   12.386235] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
738
[   12.393285] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
739
[   12.400396] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
740
[   12.407843] asoc: null-codec-dai <-> VoLTE mapping ok
741
[   12.414375] asoc: null-codec-dai <-> DTMF_RX_HOSTLESS mapping ok
742
[   12.421822] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
743
[   12.428658] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
744
[   12.435464] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
745
[   12.442301] asoc: msm-stub-tx <-> msm-dai-stub mapping ok
746
[   12.449107] asoc: msm-stub-rx <-> msm-dai-stub mapping ok
747
[   12.456096] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
748
[   12.463238] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
749
[   12.470441] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
750
[   12.477460] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
751
[   12.484541] asoc: rt5616-aif1 <-> msm-dai-q6.2 mapping ok
752
[   12.491530] asoc: rt5616-aif1 <-> msm-dai-q6.3 mapping ok
753
[   12.498397] asoc: msm-stub-rx <-> msm-dai-q6.12 mapping ok
754
[   12.505264] asoc: msm-stub-tx <-> msm-dai-q6.13 mapping ok
755
[   12.512223] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
756
[   12.519395] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
757
[   12.526598] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
758
-   47.270715] buf:+QFOPEN  passwd 
759
-  104.919975] buf:+QFCLOSE 0
760
-  121.510392] buf:+QFOPEN ?
761
[  391.714603] sps:BAM is already registered: 12502000
762
[  391.718571] usb_bam_init: register bam error -17
763
[  391.723088] usb_bam usb_bam: failed to initialize usb bam
764
[  391.728887] diag: USB disconnected
765
[  391.731603] frmnet_bind: RmNet(0) dual Speed, IN:ep13in OUT:ep7out
766
[  391.737158] sps:sps_device_reset:device handle should not be 0.
767
[  391.746009] usb_bam_reset: BAM reset failed
768
[  391.755959] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
769
[  391.761269] msm_otg msm_otg: Avail curr from USB = 2
770
[  391.766213] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
771
[  391.773264] android_work: android_work: did not send uevent (1 1   (null))
772
[  392.126384] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
773
[  392.132305] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
774
[  392.138562] msm_otg msm_otg: Avail curr from USB = 0
775
[  392.144025] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
776
[  392.155409] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
777
[  392.198687] android_work: android_work: sent uevent USB_STATE=CONNECTED
778
[  392.204578] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
779
[  392.216145] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
780
[  392.235678] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
781
[  392.291957] android_usb gadget: high speed config #1: android_usb
782
[  392.298214] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
783
[  392.303586] msm_otg msm_otg: Avail curr from USB = 500
784
[  392.309110] diag: USB connected
785
[  392.315366] android_work: android_work: sent uevent USB_STATE=CONNECTED
786
[  392.341492] diag: USB connected
787
[  392.387700] android_work: android_work: sent uevent USB_STATE=CONFIGURED
788
[  436.916496] sps:BAM is already registered: 12502000
789
[  436.920158] usb_bam_init: register bam error -17
790
[  436.925041] usb_bam usb_bam: failed to initialize usb bam
791
[  436.930749] diag: USB disconnected
792
[  436.933221] adb_bind_config
793
[  436.935144] sps:sps_device_reset:device handle should not be 0.
794
[  436.945307] frmnet_bind: RmNet(0) dual Speed, IN:ep14in OUT:ep8out
795
[  436.950617] usb_bam_reset: BAM reset failed
796
[  436.960750] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
797
[  436.966091] msm_otg msm_otg: Avail curr from USB = 2
798
[  436.971036] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
799
[  436.978055] android_work: android_work: did not send uevent (1 1   (null))
800
[  437.171158] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
801
[  437.177079] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
802
[  437.183335] msm_otg msm_otg: Avail curr from USB = 0
803
[  437.188768] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
804
[  437.198168] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
805
[  437.243644] android_work: android_work: sent uevent USB_STATE=CONNECTED
806
[  437.249565] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
807
[  437.260491] android_work: android_work:usb disconnect cause suspended&sw_suspended to 0
808
[  437.279078] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
809
[  437.336578] android_usb gadget: high speed config #1: android_usb
810
[  437.342713] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
811
[  437.348115] msm_otg msm_otg: Avail curr from USB = 500
812
[  437.353670] diag: USB connected
813
[  437.354768] msm_hsusb msm_hsusb: [ep_enable] enabling a non-empty endpoint!
814
[  437.363741] android_work: android_work: sent uevent USB_STATE=CONNECTED
815
[  437.437540] android_work: android_work: sent uevent USB_STATE=CONFIGURED
816
[  728.231893] [dsp_debug.c:dsp_read] Memory Invalid or not initialized, Base = 0x0, size = 0x0
817
[  748.249992] Ramdump(ramdump_smem-modem): Read when there's no dump available!
818 1 zecke
[  754.749549] Ramdump(ramdump_modem_sw): Read when there's no dump available!
819 4 zecke
</pre>
Add picture from clipboard (Maximum size: 48.8 MB)