Huawei ME906 » History » Version 3
laforge, 01/14/2017 12:39 PM
| 1 | 1 | laforge | h1. Huawei ME906v |
|---|---|---|---|
| 2 | |||
| 3 | The Huawei ME906v is yet another MDM9x15 based cellular modem that uses Linux on its Cortex-A5 processor, based on [[Qualcomm_Linux]] (LE). |
||
| 4 | 2 | laforge | |
| 5 | |||
| 6 | h2. USB configuration |
||
| 7 | |||
| 8 | The ME906v has different USB configurations: |
||
| 9 | |||
| 10 | h3. Configuration 1 |
||
| 11 | |||
| 12 | |Interface|Name|Description| |
||
| 13 | |0|Huawei Mobile Connect - Modem|AT Commands| |
||
| 14 | |1|Huawei Mobile Connect - Application|DIAG| |
||
| 15 | |2|Huawei Mobile Connect - Pcui|| |
||
| 16 | |3|HUAWEI Mobile Connect - Network Card|qmi-wwan| |
||
| 17 | |4|Huawei Mobile Connect - Gps|| |
||
| 18 | |5|Huawei Mobile Connect - Serial B|| |
||
| 19 | |||
| 20 | h3. Configuration 2 |
||
| 21 | |||
| 22 | |Interface|Name|Description| |
||
| 23 | |0|CDC Ethernet Control Model (ECM)|| |
||
| 24 | |1|CDC Ethernet Data|| |
||
| 25 | |2|Huawei Mobile Connect - Modem|| |
||
| 26 | |3|HUAWEI Mobile Connect - Application|| |
||
| 27 | |4|HUAWEI Mobile Connect - Pcui|| |
||
| 28 | |5|Huawei Mobile Connect - Gps|| |
||
| 29 | |6|Huawei Mobile Connect - Serial B|| |
||
| 30 | |||
| 31 | h3. Configuration 3 |
||
| 32 | |||
| 33 | |Interface|Name|Description| |
||
| 34 | |0|HUAWEI Mobile Connect - Network Card|| |
||
| 35 | |2|Huawei Mobile Connect - Gps|| |
||
| 36 | |||
| 37 | h2. AT Command interface |
||
| 38 | |||
| 39 | Unless otherwise noted, this was done using a modem with the following firmware version: |
||
| 40 | |||
| 41 | <pre> |
||
| 42 | ATI |
||
| 43 | Manufacturer: Huawei Technologies Co., Ltd. |
||
| 44 | Model: ME906V |
||
| 45 | Revision: 11.234.44.03.00 |
||
| 46 | </pre> |
||
| 47 | |||
| 48 | 3 | laforge | <pre> |
| 49 | root@9615-cdp:/# cat /build.prop |
||
| 50 | ro.build.version.release=AU_LINUX_BASE_KIWI_TARGET_ALL.03.00.032 |
||
| 51 | </pre> |
||
| 52 | |||
| 53 | 2 | laforge | h3. Interesting non-standard commands |
| 54 | |||
| 55 | The following commands appear to be non-standard and implemented in the device: |
||
| 56 | |||
| 57 | <pre> |
||
| 58 | +ES |
||
| 59 | +ESA |
||
| 60 | +CMOD |
||
| 61 | +CEMODE |
||
| 62 | +CVHU |
||
| 63 | +CECALL |
||
| 64 | +HUAWEI |
||
| 65 | ^TBAT |
||
| 66 | ^TCHRENABLE |
||
| 67 | ^TCHRINFO |
||
| 68 | ^APBATLVL |
||
| 69 | ^SETMODE |
||
| 70 | $QCSIMSTAT |
||
| 71 | $QCPBMPREF |
||
| 72 | $CREG |
||
| 73 | $CCLK |
||
| 74 | $QCCNMI |
||
| 75 | *CNTI |
||
| 76 | $QCCLR |
||
| 77 | $QCDMR |
||
| 78 | $QCDNSP |
||
| 79 | $QCDNSS |
||
| 80 | $QCTER |
||
| 81 | $QCSLOT |
||
| 82 | $QCSIMAPP |
||
| 83 | $QCPINSTAT |
||
| 84 | $QCPDPP |
||
| 85 | $QCPDPLT |
||
| 86 | $QCPWRDN |
||
| 87 | $QCDGEN |
||
| 88 | $QCPDPCFGE |
||
| 89 | $BREW |
||
| 90 | $QCANTE |
||
| 91 | $QCRPW |
||
| 92 | $QCSQ |
||
| 93 | $CSQ |
||
| 94 | $QCSYSMODE |
||
| 95 | $QCCTM |
||
| 96 | $QCBANDPREF |
||
| 97 | ^DSCI |
||
| 98 | $QCVOLT |
||
| 99 | $QCHWREV |
||
| 100 | $QCBOOTVER |
||
| 101 | $ECALL |
||
| 102 | $QCDEFPROF |
||
| 103 | $QCMRUE |
||
| 104 | $QCMRUC |
||
| 105 | $QCAPNE |
||
| 106 | $QCPDPIMSCFGE |
||
| 107 | $QCCLAC |
||
| 108 | $QCRMCALL |
||
| 109 | $QCDRX |
||
| 110 | </pre> |
