SIMtrace Hardware » History » Revision 2
Revision 1 (laforge, 02/19/2016 10:48 PM) → Revision 2/42 (laforge, 02/19/2016 10:49 PM)
[[PageOutline]] = Osmocom SIMtrace Hardware = STATUS: We're currently working on the second generation some prototypes of the Osmocom SIMtrace Hardware. The schematics, Gerber files, etc. can be found in the 'hardware' subdirectory of the simtrace.git repository: * http://cgit.osmocom.org/cgit/simtrace/tree/hardware (web browsing * git://git.osmocom.org/simtrace (git clone URL) We're using Kicad as EDA tool. Most of the work on the schematics and Gerber files has been done by Kevin Redon, based on the original design by Harald Welte. Redon == Status == As of June 04, 2011 the components have all arrived and four PCBs are in production. We expect to assemble the first units around June 14, 2011. As of June 21st, we have four re-worked prototypes that are fully functional. == TODO == * Verify operation of prototype * Add Copyright and License statement on the PCB layout * Decide on alternative sourcing of SIM adapter cables * Go into actual production == License == Schematics and Right now we did not release the schematics or Gerber files are released under any license. However, once the design is finished, we intend to put them under a Creative Commons CC-BY-SA (Share Alike / Attribution) license. == Sales == Once the design is finished and verified, the produced units are going to be sold through [http://shop.sysmocom.de/] Shipping / Sales will probably commence in early August. We intend to have them available during the 2011 CCC Camp.
