Bootlog » History » Version 2
tsaitgaist, 05/13/2017 06:31 AM
fix typo
1 | 1 | laforge | h1. Bootlog |
---|---|---|---|
2 | |||
3 | <pre> |
||
4 | Percello bootrom version 1.2.8 |
||
5 | |||
6 | |||
7 | Board: Frequency: 19.2 Mhz |
||
8 | Board: External boot: enabled |
||
9 | Board: Tcxo: internal |
||
10 | Board: MII mode: forward - Reduce: No |
||
11 | Board: External device: Eth |
||
12 | Board: Diagnostic console: Enabled |
||
13 | Board: Secure mode |
||
14 | Board: Flash type: NAND |
||
15 | Board: flash content detected |
||
16 | |||
17 | |||
18 | |||
19 | Enabling caches |
||
20 | Valid bootloader - Internal mode |
||
21 | PDR execution |
||
22 | Init script wait for 65536 |
||
23 | Init script wait for 65536 |
||
24 | Init script wait for 256 |
||
25 | Init script wait for 560 |
||
26 | Init script wait for 522 |
||
27 | Init script wait for 6656 |
||
28 | Init script wait for 6656 |
||
29 | Init script end!! |
||
30 | DDR test ...DDR: lines test ... PASSED |
||
31 | DDR: block test ... PASSED |
||
32 | PASSED |
||
33 | Image loading from NAND to DDR ...PASSED |
||
34 | Secured device - OTP2: verification ...PASSED |
||
35 | Secured device - OTP3: verification ...PASSED |
||
36 | Running Percello bootloader |
||
37 | PASSED |
||
38 | Nand execute: load_addr: 3fe0000 |
||
39 | |||
40 | Percello bootloader version 0.6 (from NAND) |
||
41 | Silicon type: 6000, silicon ver: 1, feature ver: 1, ROM ver: 2 |
||
42 | |||
43 | Sagemcom FM-loader v2.0.4-11 |
||
44 | Boot 1 (cold) into main system, secured |
||
45 | |||
46 | vol: size blocks last_leb name |
||
47 | 0: 0001F800 1 0 "bootdata" |
||
48 | 1: 0001F800 1 0 "unitdata" |
||
49 | 2: 004AD000 38 37 "linux-A" |
||
50 | 3: 004AD000 38 37 "linux-B" |
||
51 | 4: 007E0000 64 63 "linux-R" |
||
52 | 5: 00B71800 93 92 "rfs-A" |
||
53 | 6: 00B32800 91 90 "rfs-B" |
||
54 | 7: 00372000 28 27 "app-A" |
||
55 | 8: 00372000 28 27 "app-B" |
||
56 | 9: 00A17000 62 81 "data-A" |
||
57 | 10: 0054A800 19 42 "data-B" |
||
58 | 11: 0001F800 1 0 "bootdata_backup" |
||
59 | 12: 0001F800 1 0 "caldata" |
||
60 | 13: 0001F800 1 0 "caldata_backup" |
||
61 | 14: 0001F800 1 0 "unitdata_backup" |
||
62 | |||
63 | Unit key found and verified |
||
64 | TrustStor signature check passed |
||
65 | Group A signature check passed |
||
66 | Kernel A signature check passed |
||
67 | Root file system A signature check passed |
||
68 | Application file system A signature check passed |
||
69 | Booting system A... |
||
70 | Linux version 2.6.31.12-femto3xx-0.3.15 (femtobuilder@bilbo.femto.urd1.local) (gcc version 4.4.1 (Sourcery G++ Lite 4.4-303) ) #1 PREEMPT RT Wed Nov 20 13:42:34 CET 2013 |
||
71 | ISPRAM0: PA=1f000000,Size=00008000,enabled |
||
72 | DSPRAM0: PA=1f400000,Size=00004000,enabled |
||
73 | |||
74 | LINUX started... |
||
75 | CPU revision is: 59019381 (MIPS 24Kc) |
||
76 | Determined physical RAM map: |
||
77 | memory: 08000000 @ 00000000 (usable) |
||
78 | User-defined physical RAM map: |
||
79 | memory: 08000000 @ 00000000 (usable) |
||
80 | Zone PFN ranges: |
||
81 | Normal 0x00000000 -> 0x00008000 |
||
82 | Movable zone start PFN for each node |
||
83 | early_node_map[1] active PFN ranges |
||
84 | 0: 0x00000000 -> 0x00008000 |
||
85 | Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 |
||
86 | Kernel command line: console=ttyS0,115200 prt_disable=0 mtdparts=prc6000-nand.0:0x20000@0(boot),-@0x20000(system) ubi.mtd=system root=/dev/mtdblock7 rootfstype=cramfs ethaddr=d8:6c:e9:14:92:be mem=128M panic=1 ramdisk=2M server=192.168.16.18 path=/rfs |
||
87 | PID hash table entries: 512 (order: 9, 2048 bytes) |
||
88 | Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) |
||
89 | Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) |
||
90 | Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. |
||
91 | Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes |
||
92 | Writing ErrCtl register=00000000 |
||
93 | Readback ErrCtl register=00000000 |
||
94 | Memory: 123732k/131072k available (3643k kernel code, 7172k reserved, 865k data, 172k init, 0k highmem) |
||
95 | Real-Time Preemption Support (C) 2004-2007 Ingo Molnar |
||
96 | Preemptible RCU implementation. |
||
97 | NR_IRQS:128 |
||
98 | CPU frequency 614.40 MHz |
||
99 | Console: colour dummy device 80x25 |
||
100 | Calibrating delay loop... 408.78 BogoMIPS (lpj=2043904) |
||
101 | Mount-cache hash table entries: 512 |
||
102 | NET: Registered protocol family 16 |
||
103 | GPIO: registering PRC6000 chip. Access protect mask = 0x0 |
||
104 | PRC6000 FSM: count5us =1ff0000 |
||
105 | bio: create slab <bio-0> at 0 |
||
106 | Slow work thread pool: Starting up |
||
107 | Slow work thread pool: Ready |
||
108 | FS-Cache: Loaded |
||
109 | CacheFiles: Loaded |
||
110 | NET: Registered protocol family 2 |
||
111 | IP route cache hash table entries: 1024 (order: 0, 4096 bytes) |
||
112 | TCP established hash table entries: 4096 (order: 3, 32768 bytes) |
||
113 | TCP bind hash table entries: 4096 (order: 4, 114688 bytes) |
||
114 | TCP: Hash tables configured (established 4096 bind 4096) |
||
115 | TCP reno registered |
||
116 | NET: Registered protocol family 1 |
||
117 | JFFS2 version 2.2. © 2001-2006 Red Hat, Inc. |
||
118 | fuse init (API version 7.12) |
||
119 | msgmni has been set to 241 |
||
120 | alg: No test for cipher_null (cipher_null-generic) |
||
121 | alg: No test for ecb(cipher_null) (ecb-cipher_null) |
||
122 | alg: No test for digest_null (digest_null-generic) |
||
123 | alg: No test for compress_null (compress_null-generic) |
||
124 | alg: No test for stdrng (krng) |
||
125 | alg: No test for stdrng (ansi_cprng) |
||
126 | io scheduler noop registered |
||
127 | io scheduler anticipatory registered (default) |
||
128 | io scheduler deadline registered |
||
129 | io scheduler cfq registered |
||
130 | Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled |
||
131 | serial8250.2: ttyS0 at MMIO 0x1ec01800 (irq = 8) is a 16550A |
||
132 | console [ttyS0] enabled |
||
133 | serial8250.2: ttyS1 at MMIO 0x1ec01c00 (irq = 9) is a 16550A |
||
134 | brd: module loaded |
||
135 | loop: module loaded |
||
136 | nbd: registered device at major 43 |
||
137 | Fixed MDIO Bus: probed |
||
138 | IMQ driver loaded successfully. |
||
139 | Hooking IMQ after NAT on PREROUTING. |
||
140 | Hooking IMQ before NAT on POSTROUTING. |
||
141 | tun: Universal TUN/TAP device driver, 1.6 |
||
142 | tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
||
143 | STMMAC driver: |
||
144 | platform registration... |
||
145 | done! |
||
146 | DWMAC1000 - user ID: 0x10, Synopsys ID: 0x34 |
||
147 | Enhanced descriptor structure |
||
148 | eth0 - (dev. name: stmmaceth - id: 0, IRQ #21 |
||
149 | IO base addr: 0xbe800000) |
||
150 | mmi: probed |
||
151 | eth0: PHY ID 004dd043 at 0 IRQ -1 (mii0:00) active |
||
152 | eth0: PHY ID 004dd043 at 1 IRQ -1 (mii0:01) |
||
153 | eth0: PHY ID 004dd043 at 2 IRQ -1 (mii0:02) |
||
154 | eth0: PHY ID 004dd043 at 3 IRQ -1 (mii0:03) |
||
155 | eth0: PHY ID 004dd043 at 4 IRQ -1 (mii0:04) |
||
156 | eth0: PHY ID 00000000 at 16 IRQ -1 (mii0:10) |
||
157 | eth0: PHY ID 00000000 at 17 IRQ -1 (mii0:11) |
||
158 | eth0: PHY ID 00000000 at 18 IRQ -1 (mii0:12) |
||
159 | eth0: PHY ID 00000000 at 19 IRQ -1 (mii0:13) |
||
160 | eth0: PHY ID 40040000 at 20 IRQ -1 (mii0:14) |
||
161 | eth0: PHY ID 00000000 at 21 IRQ -1 (mii0:15) |
||
162 | eth0: PHY ID 00000000 at 22 IRQ -1 (mii0:16) |
||
163 | eth0: PHY ID 00000000 at 23 IRQ -1 (mii0:17) |
||
164 | eth0: PHY ID 00000000 at 24 IRQ -1 (mii0:18) |
||
165 | eth0: PHY ID 00000000 at 25 IRQ -1 (mii0:19) |
||
166 | eth0: PHY ID 00000000 at 26 IRQ -1 (mii0:1a) |
||
167 | eth0: PHY ID 00000000 at 27 IRQ -1 (mii0:1b) |
||
168 | eth0: PHY ID 40040000 at 28 IRQ -1 (mii0:1c) |
||
169 | eth0: PHY ID 00000000 at 29 IRQ -1 (mii0:1d) |
||
170 | eth0: PHY ID 00000000 at 30 IRQ -1 (mii0:1e) |
||
171 | eth0: PHY ID 00000000 at 31 IRQ -1 (mii0:1f) |
||
172 | physmap platform flash device: 04000000 at 18000000 |
||
173 | physmap-flash physmap-flash.0: map_probe failed |
||
174 | Unable to find NOR flash in prc_nand_driver |
||
175 | PRC6000 MTD NAND Driver: ECC read delay 11uS, ECC write delay 13uS |
||
176 | NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) |
||
177 | Scanning device for bad blocks |
||
178 | Bad eraseblock 364 at 0x000002d80000 |
||
179 | 2 cmdlinepart partitions found on MTD device prc6000-nand.0 |
||
180 | Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": |
||
181 | 0x000000000000-0x000000020000 : "boot" |
||
182 | 0x000000020000-0x000008000000 : "system" |
||
183 | UBI: attaching mtd1 to ubi0 |
||
184 | UBI: physical eraseblock size: 131072 bytes (128 KiB) |
||
185 | UBI: logical eraseblock size: 129024 bytes |
||
186 | UBI: smallest flash I/O unit: 2048 |
||
187 | UBI: sub-page size: 512 |
||
188 | UBI: VID header offset: 512 (aligned 512) |
||
189 | UBI: data offset: 2048 |
||
190 | UBI: attached mtd1 to ubi0 |
||
191 | UBI: MTD device name: "system" |
||
192 | UBI: MTD device size: 127 MiB |
||
193 | UBI: number of good PEBs: 1022 |
||
194 | UBI: number of bad PEBs: 1 |
||
195 | UBI: max. allowed volumes: 128 |
||
196 | UBI: wear-leveling threshold: 4096 |
||
197 | UBI: number of internal volumes: 1 |
||
198 | UBI: number of user volumes: 15 |
||
199 | UBI: available PEBs: 0 |
||
200 | UBI: total number of reserved PEBs: 1022 |
||
201 | UBI: number of PEBs reserved for bad PEB handling: 10 |
||
202 | UBI: max/mean erase counter: 216/82 |
||
203 | UBI: image sequence number: 1755518098 |
||
204 | UBI: background thread "ubi_bgt0d" started, PID 892 |
||
205 | i2c /dev entries driver |
||
206 | prc_i2c prc_i2c.0: PRC6000 i2c bus driver. Port 0=Disabled Port 1=Enabled |
||
207 | oprofile: using mips/24K performance monitoring. |
||
208 | u32 classifier |
||
209 | Netfilter messages via NETLINK v0.30. |
||
210 | nf_conntrack version 0.5.0 (2048 buckets, 8192 max) |
||
211 | ctnetlink v0.93: registering with nfnetlink. |
||
212 | IPv4 over IPv4 tunneling driver |
||
213 | TCP cubic registered |
||
214 | NET: Registered protocol family 17 |
||
215 | NET: Registered protocol family 15 |
||
216 | RPC: Registered udp transport module. |
||
217 | RPC: Registered tcp transport module. |
||
218 | SCTP: Hash tables configured (established 1024 bind 1170) |
||
219 | timer1_set_mode(mode=1) |
||
220 | timer1_set_mode(mode=3) |
||
221 | VFS: Mounted root (cramfs filesystem) readonly on device 31:7. |
||
222 | Freeing unused kernel memory: 172k freed |
||
223 | =================================================== |
||
224 | Welcome to Sagemcom Root File System Version 1.39.0 |
||
225 | =================================================== |
||
226 | ---- Mounting proc file system |
||
227 | ---- Mounting ramdisk with size 32M |
||
228 | ---- Remounting /dev/root |
||
229 | ---- Starting syslogd |
||
230 | ---- Mounting sysfs |
||
231 | ---- Mounting debugfs |
||
232 | ---- Mounting devpts |
||
233 | ---- Creating loopback device |
||
234 | ---- Activating Ethernet device |
||
235 | ---- Activating firewall |
||
236 | ---- Loading percello modules |
||
237 | ---- Starting marsupial |
||
238 | ---- Reset WD |
||
239 | ---- Configuring network using dhcp |
||
240 | Board's MAC address is: D8:6C:E9:14:92:BE |
||
241 | Unit security level: secure |
||
242 | 305419857 1 0 0 0 |
||
243 | Running out of bank A |
||
244 | Signature check ok: unitdata |
||
245 | |||
246 | |||
247 | WARNING: /unitdata/cert/hnb.key is missing |
||
248 | ---- Starting Monitor |
||
249 | net.unix.max_dgram_qlen = 1000 |
||
250 | |||
251 | ---- Starting StrongSwan |
||
252 | Starting strongSwan 4.3.5 IPsec [starter]... |
||
253 | no default route - cannot cope with %defaultroute!!! |
||
254 | ---- Starting FAP |
||
255 | </pre> |
||
256 | |||
257 | h2. Further reading |
||
258 | |||
259 | 2 | tsaitgaist | https://pastebin.com/FgjXZ6JF seems to be another percello based device but with Ubiquisys firmware. |