DUL Shell Commands » History » Version 2
laforge, 12/13/2020 05:28 PM
1 | 1 | laforge | h1. DUL Shell Commands |
---|---|---|---|
2 | |||
3 | 2 | laforge | {{>toc}} |
4 | |||
5 | h2. @aaconfig@ |
||
6 | |||
7 | <pre> |
||
8 | $ aaconfig |
||
9 | |||
10 | SYNOPSIS |
||
11 | aaconfig [-ttl <1-86400>] [-print] |
||
12 | |||
13 | |||
14 | DESCRIPTION |
||
15 | This command sets DNS TTL interval for all addresses in AA server list if there is(are) hostname(s). |
||
16 | It can be used to print the (un)resolved hostname/address information |
||
17 | |||
18 | OPTIONS |
||
19 | Without options or with wrong syntax help text is printed. |
||
20 | -print Print the unresolved, and resolved hostname-address information, and the DNS ttl time. |
||
21 | -ttl <interval> Sets resolve interval time in seconds. This does an address resolution and resets the |
||
22 | time to live timer for AA server DNS lookups. |
||
23 | |||
24 | OPERANDS |
||
25 | - |
||
26 | |||
27 | EXAMPLES |
||
28 | aaconfig -ttl 3600 |
||
29 | aaconfig -print |
||
30 | </pre> |
||
31 | |||
32 | h2. @appbh info@ |
||
33 | |||
34 | <pre> |
||
35 | $ appbh info |
||
36 | CBM Board Handler Status Information |
||
37 | |||
38 | APP Driver |
||
39 | ================================================== |
||
40 | driverId = 4 |
||
41 | state = ST_ACTIVATE |
||
42 | stFault = No |
||
43 | hwFault = No |
||
44 | swFault = No |
||
45 | restartRank = Cold |
||
46 | loopVlanId = 102 |
||
47 | endPointMac = 02:00:01:02:00:01 |
||
48 | multicastMac = 03:00:5e:00:11:12 |
||
49 | |||
50 | Board |
||
51 | ================================================== |
||
52 | productNumber = KDU 137 533/4 |
||
53 | productRevision = R1B |
||
54 | productName = DUL 20 01 |
||
55 | productDate = 20110218 |
||
56 | serialNumber = CB4G593134 |
||
57 | |||
58 | NPU |
||
59 | ================================================== |
||
60 | fileName = /c/loadmodules_norepl/CXC1726213_R79X17 |
||
61 | fwProductNumber = CXC 172 6213 |
||
62 | fwProductRevision = R79X17 |
||
63 | chipName = APP3342 |
||
64 | dataPlaneVersion = -??- |
||
65 | |||
66 | PBOOT Options |
||
67 | ================================================== |
||
68 | optNoNpuAliveTest = False |
||
69 | optNoHwFaultInd = False |
||
70 | optNoSwFaultInd = False |
||
71 | optNoNpuGwCellTest = False |
||
72 | </pre> |
||
73 | |||
74 | h2. @ |
||
75 | |||
76 | h2. @arm print@ |
||
77 | |||
78 | <pre> |
||
79 | $ arm print |
||
80 | |||
81 | Content of the Armament file: |
||
82 | |||
83 | 0,1,KDU137533/4,*,1,1,CXC1729957_R79X22,10,0,0,0 |
||
84 | 0,1,KDU137533/4,*,1,2,CXC1731080_R79X14,50,0,0,0 |
||
85 | 0,1,KDU137533/4,*,1,3,CXC1732167_R79X11,68,0,0,0 |
||
86 | 0,1,KDU137533/4,*,1,4,CXC1732204_R79X11,68,0,0,0 |
||
87 | 0,1,KDU137533/4,*,1,5,CXC1732469_R79X13,100,0,0,0 |
||
88 | 0,1,KDU137533/4,*,1,6,CXC1320781_R79X12,200,20000000,0,0 |
||
89 | 0,1,KDU137533/4,*,1,7,CXC1327705_R79X08,200,0,0,0 |
||
90 | 0,1,KDU137533/4,*,1,8,CXC1321315_R79X15,200,741888,0,0 |
||
91 | 0,1,KDU137533/4,*,1,9,CXC1320787_R79X12,200,0,1200000,0 |
||
92 | 0,1,KDU137533/4,*,1,10,CXC1321341_R79X12,200,0,0,0 |
||
93 | 0,1,KDU137533/4,*,1,11,CXC1322506_R79X08,200,459000,0,0 |
||
94 | 0,1,KDU137533/4,*,1,12,CXC1323464_R79X12,200,0,0,0 |
||
95 | 0,1,KDU137533/4,*,1,13,CXC1325792_R79X13,200,0,0,0 |
||
96 | 0,1,KDU137533/4,*,1,14,CXC1321314_R79X13,200,0,0,0 |
||
97 | 0,1,KDU137533/4,*,1,15,CXC1320782_R79X16,200,1269600,1016388,0 |
||
98 | 0,1,KDU137533/4,*,1,16,CXC1321316_R79X08,200,0,0,0 |
||
99 | 0,1,KDU137533/4,*,1,17,CXC1329000%3_R12E01,250,0,0,0 |
||
100 | 0,1,KDU137533/4,*,1,18,CXC1725398%16_R26X,250,0,0,0 |
||
101 | 0,1,KDU137533/4,*,1,19,CXC1725422%1_R17AC03,250,0,0,0 |
||
102 | 0,1,KDU137533/4,*,1,20,CXC1323891%2_R37S01,250,0,0,0 |
||
103 | 0,1,KDU137533/4,*,1,21,CXC1732768%7_R23C,250,0,0,0 |
||
104 | 0,1,KDU137533/4,*,1,22,CXC1732823%16_R26AX,250,0,0,0 |
||
105 | 0,1,KDU137533/4,*,1,23,CXC1320784_R79X13,300,20000000,4100000,0 |
||
106 | 0,1,KDU137533/4,*,1,24,CXC1323911_R79X17,300,0,3000000,0 |
||
107 | 0,1,KDU137533/4,*,1,25,CXC1732821_R79X09,300,0,0,0 |
||
108 | 0,1,KDU137533/4,*,1,26,CXC1721176_R79X12,300,0,0,0 |
||
109 | 0,1,KDU137533/4,*,1,27,CXC1326054_R79X13,300,0,500000,0 |
||
110 | 0,1,KDU137533/4,*,1,28,CXC1320783_R79X08,300,0,459000,0 |
||
111 | 0,1,KDU137533/4,*,1,29,CXC1731354_R79X19,400,0,0,0 |
||
112 | 0,1,KDU137533/4,*,1,30,CXC1727219_R79X32,400,0,0,0 |
||
113 | 0,1,KDU137533/4,*,1,31,CXC1731081_R79X19,400,0,0,0 |
||
114 | 0,1,KDU137533/4,*,1,32,CXC1728281_R79X09,400,0,0,0 |
||
115 | 0,1,KDU137533/4,*,1,33,CXC1325240%1_R79X14,400,1341440,842015,0 |
||
116 | 0,1,KDU137533/4,*,1,34,CXC1727220_R79X29,400,0,0,0 |
||
117 | 0,1,KDU137533/4,*,1,35,CXC1321344_R79X08,400,0,0,0 |
||
118 | 0,1,KDU137533/4,*,1,36,CXC1729153%7_R22N,500,0,0,0 |
||
119 | 0,1,KDU137533/4,*,1,37,CXC1725191%16_R26Z,500,236444224,30000000,0 |
||
120 | 0,1,KDU137533/4,*,1,38,CXC1720483_R79X08,500,0,0,0 |
||
121 | 0,1,KDU137533/4,*,1,39,CXC1733444_R79X27,500,0,0,0 |
||
122 | 0,1,KDU137533/4,*,1,40,CXC1725190%16_R26Z,500,70000000,10000000,0 |
||
123 | 0,1,KDU137533/4,*,1,41,CXC1726088%16_R26Z,530,134274688,10000000,0 |
||
124 | |||
125 | |||
126 | Current LLP internal config: Board List |
||
127 | |||
128 | Board loc: 0,1 isMp: 1 |
||
129 | product No: KDU137533/4, product Rev: * |
||
130 | status: DEFINED |
||
131 | noOfLm: 41 |
||
132 | noOfValidLmps: 1 |
||
133 | lmplist: 0,1 |
||
134 | |||
135 | |||
136 | |||
137 | Current LLP internal config: MP List |
||
138 | |||
139 | Board loc: 0,1 |
||
140 | noOfLmpClients: 1, 0, 0, 0 |
||
141 | isLmp: 1 |
||
142 | |||
143 | LLP.LMID content: CXC1732469_R79X13 0 0 1 65535 |
||
144 | |||
145 | |||
146 | llpExecMode: Active |
||
147 | llpAdmState: NORMAL |
||
148 | </pre> |
||
149 | |||
150 | h2. @bcm port@ |
||
151 | |||
152 | <pre> |
||
153 | $ bcm port |
||
154 | ----+----------+-----+------+------+-----------+-----------+---------------+------------------ |
||
155 | Port|Name |Link |Speed |Duplex|Traffic |Pause State|STP State |Last Source Address |
||
156 | | | |(Mbps)| | Tx | Rx | Tx | Rx | | |
||
157 | ----+----------+-----+------+------+-----------+-----------+---------------+------------------ |
||
158 | 0 | PQIII | Up | 1000 | Full | E | E | D | D | NoSpanningTree| 02:00:01:00:00:00 |
||
159 | 1 | ATM_WP2 |Down | **** | **** | *** | *** | *** | *** | **************| ***************** |
||
160 | 2 | APP3342 | Up | 1000 | Full | E | E | D | D | NoSpanningTree| 02:00:01:02:00:01 |
||
161 | 3 | BASEBAND1| Up | 1000 | Full | E | E | D | D | NoSpanningTree| 00:00:00:00:00:00 |
||
162 | 4 | DU LINK |Down | **** | **** | *** | *** | *** | *** | **************| ***************** |
||
163 | 5 | BASEBAND2|Down | **** | **** | *** | *** | *** | *** | **************| ***************** |
||
164 | 6 | LOOPBACK | Up | 1000 | Full | E | E | D | D | NoSpanningTree| 02:00:01:02:00:01 |
||
165 | 7 | DEBUG |Down | **** | **** | *** | *** | *** | *** | **************| ***************** |
||
166 | </pre> |
||
167 | |||
168 | h2. @biosls@ |
||
169 | |||
170 | <pre> |
||
171 | $ biosls |
||
172 | 1: biosInstall |
||
173 | 2: biosOpen |
||
174 | 3: biosUninstall |
||
175 | 4: biosRunlevel |
||
176 | 5: biosList |
||
177 | 6: MM |
||
178 | 7: MMAN |
||
179 | 8: ose |
||
180 | 9: CACHE |
||
181 | 10: RAMLOG |
||
182 | 11: SYSPARAM |
||
183 | 12: OSE_PTHREAD |
||
184 | 13: RTC |
||
185 | 14: HEAP |
||
186 | 15: PM |
||
187 | 16: CHPI_SERVICE |
||
188 | 17: eriInit |
||
189 | 18: BOARDPARAM |
||
190 | 19: POOLEXT_BIOS_SERVICE |
||
191 | 20: start_restart_mmi_if |
||
192 | 21: Cs_trace_bios |
||
193 | 22: traceAndErrorInit |
||
194 | 23: UART |
||
195 | 24: UART750 |
||
196 | 25: start_restart_lm_if |
||
197 | 26: tinai |
||
198 | 27: FCCETH |
||
199 | 28: nlETSEC |
||
200 | 29: DEVBUF |
||
201 | 30: vlan |
||
202 | 31: MDIO_ETSEC |
||
203 | 32: I2C |
||
204 | 33: SysEvlog |
||
205 | 34: PCI |
||
206 | 35: SRIOIO |
||
207 | 36: SRIOMSG |
||
208 | 37: boardManagerBiosEntry |
||
209 | 38: HD_CLR_CFG |
||
210 | 39: HD_READ |
||
211 | 40: HD_WRITE |
||
212 | 41: IRQ |
||
213 | 42: ADI |
||
214 | 43: CLS_MTC_DD_NAME |
||
215 | 44: WEBS |
||
216 | 45: Split Ethernet |
||
217 | 46: OSENET |
||
218 | 47: ecpx |
||
219 | </pre> |
||
220 | |||
221 | h2. @bl@ |
||
222 | |||
223 | <pre> |
||
224 | $ bl |
||
225 | bid name procs segid |
||
226 | 0x00020347 gcpu01024 12 0x00000000 |
||
227 | 0x00020372 gcpu00768 10 0x00000000 |
||
228 | 0x0002036a gcpu00512 10 0x00000000 |
||
229 | 0x00020371 BXP_0_1 2 0x00000000 |
||
230 | 0x00010385 gcpu00256 10 0x00000000 |
||
231 | 0x0002037b WEBS Spawn 1 0x000101e9 |
||
232 | 0x00010374 CelloIaci_telnetFtp_block 2 0x000101c7 |
||
233 | 0x00010326 BXPBlock 8 0x0001016a |
||
234 | 0x0001031c Ipom_httpsgwy 2 0x000101c7 |
||
235 | 0x00010318 Osa_secAccess_block 1 0x000101c7 |
||
236 | 0x00040307 Ipom_split_Eth_server_block 1 0x000100dd |
||
237 | 0x00010304 Ipom_split_Eth_client_block 1 0x00010138 |
||
238 | 0x000402ff ospi_CXC1321315_block 1 0x000100dd |
||
239 | 0x000102e9 ose_sock_server_block 1 0x000100dd |
||
240 | 0x000102e5 ose_inet_block 3 0x000100dd |
||
241 | 0x000302db prngd_block 2 0x00010113 |
||
242 | 0x000302c3 CXC1726088%16_R26Z 21 0x000102c4 |
||
243 | 0x000102ae CXC1725190%16_R26Z 19 0x000102af |
||
244 | 0x0002028e CXC1733444_R79X27 59 0x0001028f |
||
245 | 0x00020287 CXC1720483_R79X08 4 0x00010288 |
||
246 | 0x00010271 CXC1725191%16_R26Z 19 0x00010272 |
||
247 | 0x0002025d CXC1729153%7_R22N 18 0x0001025e |
||
248 | 0x00010257 CXC1321344_R79X08 3 0x00010258 |
||
249 | 0x0001024e CXC1727220_R79X29 9 0x0001024f |
||
250 | 0x00020249 CXC1325240%1_R79X14 8 0x00020248 |
||
251 | 0x00060237 CXC1728281_R79X09 10 0x00010239 |
||
252 | 0x0001020f CXC1731081_R79X19 38 0x00010210 |
||
253 | 0x000201fb CXC1727219_R79X32 18 0x000101fc |
||
254 | 0x000101f2 CXC1731354_R79X19 7 0x000101f3 |
||
255 | 0x000201ef ose_webs_block 2 0x000101e9 |
||
256 | 0x000101e8 CXC1320783_R79X08 5 0x000101e9 |
||
257 | 0x000201e1 CXC1326054_R79X13 4 0x000101e2 |
||
258 | 0x000201da CXC1721176_R79X12 4 0x000101db |
||
259 | 0x000101d2 CXC1732821_R79X09 5 0x000101d3 |
||
260 | 0x000301c6 CXC1323911_R79X17 17 0x000101c7 |
||
261 | 0x000601bc CXC1320784_R79X13 72 0x000101bd |
||
262 | 0x000901b0 CXC1732823%16_R26AX 9 0x000101b1 |
||
263 | 0x000201ac Ipom_dhcp_client_block 1 0x000100f6 |
||
264 | 0x0001019f CXC1732768%7_R23C 9 0x000101a0 |
||
265 | 0x00020169 CXC1323891%2_R37S01 32 0x0001016a |
||
266 | 0x0002015c CXC1725422%1_R17AC03 14 0x0001015d |
||
267 | 0x00020150 CXC1725398%16_R26X 16 0x00010151 |
||
268 | 0x0002013e CXC1329000%3_R12E01 13 0x0001013f |
||
269 | 0x00020137 CXC1321316_R79X08 6 0x00010138 |
||
270 | 0x00020120 CXC1320782_R79X16 24 0x00010121 |
||
271 | 0x00020112 CXC1321314_R79X13 32 0x00010113 |
||
272 | 0x0001010b CXC1325792_R79X13 6 0x0001010c |
||
273 | 0x000200ff CXC1323464_R79X12 10 0x00010100 |
||
274 | 0x000200f5 CXC1322506_R79X08 9 0x000100f6 |
||
275 | 0x000200ee CXC1321341_R79X12 4 0x000100ef |
||
276 | 0x000200e4 CXC1320787_R79X12 7 0x000100e5 |
||
277 | 0x000200dc CXC1321315_R79X15 27 0x000100dd |
||
278 | 0x000200d5 CXC1327705_R79X08 3 0x000100d6 |
||
279 | 0x000600cc CXC1320781_R79X12 16 0x000100cd |
||
280 | 0x000100bf CXC1732469_R79X13 9 0x000100c0 |
||
281 | 0x000200b9 ose_lh 9 0x00000000 |
||
282 | 0x000100a8 CXC1732204_R79X11 3 0x000100a9 |
||
283 | 0x000200a3 CXC1732167_R79X11 4 0x000200a4 |
||
284 | 0x0001000e osemain 175 0x00000000 |
||
285 | 0x00010008 main 3 0x00000000 |
||
286 | 0x00010001 OSE 9 0x00000000 |
||
287 | Total 61 blocks |
||
288 | </pre> |
||
289 | |||
290 | h2. @devinfo@ |
||
291 | |||
292 | <pre> |
||
293 | $ devinfo |
||
294 | REAL DEVICES |
||
295 | Device Mode Cl Claimed Unclaimed |
||
296 | FCCETH:2 excl 1 0 0 |
||
297 | hwaddress:00:1E:DF:FB:33:AE promiscuous:off |
||
298 | mtu:9600 rxbufsz:9600 hwrxq:32 hwtxq:128 swtxq:128 |
||
299 | rxframes:834 txframes:101 rxbytes:53376 txbytes:6464 |
||
300 | rxerrs:0 txerrs:0 |
||
301 | link:up speed:100Mbit/s duplex:full loopback:off |
||
302 | FCCETH:4 shrd 2 0 0 |
||
303 | hwaddress:02:00:01:00:00:00 promiscuous:off |
||
304 | mtu:9600 rxbufsz:9600 hwrxq:32 hwtxq:128 swtxq:256 |
||
305 | rxframes:0 txframes:5085 rxbytes:0 txbytes:326508 |
||
306 | rxerrs:0 txerrs:0 |
||
307 | link:up speed:1000Mbit/s duplex:full loopback:off |
||
308 | |||
309 | VLAN DEVICES |
||
310 | Device VID Pri Real Device Received Transmitted |
||
311 | vlan:0 11 6 FCCETH:4 0 0 |
||
312 | |||
313 | DEVICE CLIENTS |
||
314 | Device # State RX-q TX-q Delivered Discarded Transmitted Process |
||
315 | FCCETH:2 0 runni N/A 0 0 0 0 ose_split_client |
||
316 | frtypes: 0x800 0x806 0x8035 0x86dd |
||
317 | FCCETH:4 0 runni N/A 0 0 0 0 ethi_server |
||
318 | frtypes: 0xbad |
||
319 | FCCETH:4 1 runni N/A 0 0 0 5040 Sys_Cls_mch_proc |
||
320 | frtypes: 0x8907 0x8907 |
||
321 | </pre> |
||
322 | |||
323 | h2. @cell list@ |
||
324 | |||
325 | <pre> |
||
326 | $ cell list |
||
327 | |||
328 | ================================================================================================== |
||
329 | cellId froId froType ldn admState opState availabilityStatus |
||
330 | ================================================================================================== |
||
331 | 1 0 117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED) 0 (DISABLED) 8 (OFF_LINE) |
||
332 | 2 1 117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED) 0 (DISABLED) 8 (OFF_LINE) |
||
333 | 3 2 117506048 (FDD) EUtranCellFDD=DFWe06 0 (LOCKED) 0 (DISABLED) 8 (OFF_LINE) |
||
334 | </pre> |
||
335 | |||
336 | h2. @cell list -cellId 1@ |
||
337 | |||
338 | <pre> |
||
339 | $ cell data -cellId 1 |
||
340 | |||
341 | =================================================================================== |
||
342 | RnhCellCtrlC in state <<machine>:TOP:Active:> |
||
343 | |||
344 | cellId: 1 |
||
345 | froId: 0 |
||
346 | froType: 117506048 |
||
347 | State: LOCKED_IDLE(0) |
||
348 | cellDownAuto: false |
||
349 | cellDownMan: true |
||
350 | isCellResourcesAllocated: false |
||
351 | ispCause: 1 |
||
352 | licensedDlChannelBandwidth 0 |
||
353 | licensedUlChannelBandwidth: 0 |
||
354 | initialIspCause: 0 |
||
355 | isInternalReconfigure: false |
||
356 | alarmOtherFaultId: 0 |
||
357 | alarmRaisedCellRangeBw: false |
||
358 | alarmRaisedOther: false |
||
359 | alarmRaisedSupportedCell: false |
||
360 | |||
361 | =================================================================================== |
||
362 | |||
363 | =================================================================================== |
||
364 | RnhCellNodeAdmissionC in state <<machine>:TOP:Active:> |
||
365 | |||
366 | Node info: |
||
367 | totGbrThresholdDl=500000000 totAccGbrDl=0 |
||
368 | totGbrThresholdUl=500000000 totAccGbrUl=0 |
||
369 | |||
370 | Cell specific info: |
||
371 | cellId=1124081774 |
||
372 | accGbrDl=4405174864871301238 |
||
373 | accGbrUl=5288389385228218469 |
||
374 | numGbrBearers=1634497893 |
||
375 | isNodeAdmissionProxyPortAvailable=true |
||
376 | |||
377 | =================================================================================== |
||
378 | </pre> |
||
379 | |||
380 | h2. @cv@ |
||
381 | |||
382 | <pre> |
||
383 | $ cv help |
||
384 | Create CV: cv mk <name> [id] [type] [puid] [operator] [comment] |
||
385 | Remove CV: cv rm <name> |
||
386 | Set as startable: cv set <name> |
||
387 | List cv:s: cv ls |
||
388 | Current usage: cv cu |
||
389 | Set rollback init values: cv rbinit <status> <timer> <counter> |
||
390 | - status : 0=no_change, 1=rollback_on, 2=rollback_off |
||
391 | - timer : 0=no_change, 1-n minutes |
||
392 | - counter : 0=no_change, 1-n |
||
393 | Set first in rollback list: cv rbset <name> |
||
394 | Remove from rollback list: cv rbrm <name> |
||
395 | Set rollback counter: cv rbcnt <counter> , counter should be >=0 |
||
396 | Check if loaded cv is upgrade: cv up |
||
397 | Clean up cv dir: cv clean <level> |
||
398 | - level : 1=remove all cvs except one used by cv pointer. |
||
399 | - level : 2=remove all cvs except one used by cv pointer & rollback list. |
||
400 | - level : 3=remove all cvs on passive side that does not exist on active side. |
||
401 | Synch from active to MP with given lnh name: cv synch <lnh> |
||
402 | List upgrade cv: cv upls <upgrade package id> |
||
403 | Remove upgrade cv: cv uprm <upgrade package id> |
||
404 | Checksum cv: cv csum <name> <mode> |
||
405 | - name: CV name to checksum files for |
||
406 | - mode: active=active Core MP, passive=passive Core MP |
||
407 | Precheck cv: cv prec <number of new CVs> |
||
408 | </pre> |
||
409 | |||
410 | h2. @dumpelg@ |
||
411 | |||
412 | <pre> |
||
413 | $ dumpelg |
||
414 | |||
415 | LOG ENTRIES: |
||
416 | seqNr date time message |
||
417 | 2 700101 000409 000;;Subrack 00;Slot 01 |
||
418 | 3 700101 000409 000;CXP102051/10_R9BE/2 |
||
419 | 4 101207 132443 200;SFP01 ;prod ;rev |
||
420 | 5 101207 132443 200;SFP02 ;prod ;rev |
||
421 | 6 101207 132443 200;SFP03 ;prod ;rev |
||
422 | 7 101207 134314 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on |
||
423 | 8 101207 134314 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on |
||
424 | 9 110131 041336 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on |
||
425 | 10 110307 164250 L10;CXC1729957_R73D95;smn 0, apn 1, CXC1727220_R73D34, Nss_tum2_tumgr_proc: red led on |
||
426 | 11 120502 070133 200;SFP01 ;prod ;rev |
||
427 | 12 120502 070133 200;SFP02 ;prod ;rev |
||
428 | 13 120502 070133 200;SFP03 ;prod ;rev |
||
429 | 14 120612 173054 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led on |
||
430 | 15 120612 173100 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led off |
||
431 | 16 120612 180602 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led on |
||
432 | 17 120612 180607 L10;CXC1729957_R77S55;smn 0, apn 1, CXC1725422%1_R15AA04, Nci_control_proc: red led off |
||
433 | 18 130205 081309 000;DFWe0604824;Subrack 00;Slot 01 |
||
434 | 19 130205 081309 000;CXP102051/16_R26AZ |
||
435 | 20 130205 081322 200;SFP01 ;prod ;rev ;BR 00 |
||
436 | 21 130205 081323 200;SFP02 ;prod ;rev ;BR 00 |
||
437 | 22 130205 081323 200;SFP03 ;prod ;rev ;BR 00 |
||
438 | 23 700101 000000 L11; Machine check input to core mcp |
||
439 | 24 170319 101308 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
440 | 25 170319 101308 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
441 | 26 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
442 | 27 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
443 | 28 170319 101317 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
444 | 29 170319 101307 L10;CXC1729957_R79X22;smn 0, apn 1, CXC1725422%1_R17AC03, Nci_control_proc: red led on |
||
445 | </pre> |
||
446 | |||
447 | h2. @help@ |
||
448 | |||
449 | <pre> |
||
450 | $ help |
||
451 | Command Description |
||
452 | default shell command |
||
453 | . execute commands from file |
||
454 | ? print description of commands |
||
455 | EtHostMo_getPmCounters Get PM counters for a specified host |
||
456 | EtHostMo_startPing |
||
457 | GtpShDump Command syntax: |
||
458 | GtpShPrintProc Command syntax: |
||
459 | Ippmlh Umbrella function for internal COLI commands |
||
460 | IppsrhInfo The IppsrhInfo command has several subcommands; |
||
461 | NtpDr Print info from NTP sync HW driver |
||
462 | UdpShDump Command syntax: |
||
463 | UdpShPrintProc Command syntax: |
||
464 | aaconfig Sets TTL timeout for DNS lookups |
||
465 | aatest Diagnostics for AA server(s), -h for more help |
||
466 | adderrorhook Registers an faulty error hook |
||
467 | appapi APP33DR APP3342 RTE/API status and control |
||
468 | apparp APP33DR ARP status and control |
||
469 | appbh APP33DR BH status and control |
||
470 | appcmn APP33DR CMN status and control |
||
471 | appdscp APP33DR DSCP |
||
472 | appflow APP33DR FLOW |
||
473 | appfpc APP33DR FPC |
||
474 | appfsm APP33DR FSM status and control |
||
475 | appiac APP33DR IAC |
||
476 | appicmp APP33DR ICMP status and control |
||
477 | applaid APP33DR LAID |
||
478 | applh APP33DR LH status and control |
||
479 | apppd APP33DR PD |
||
480 | appph APP33DR PH status and control |
||
481 | apppol APP33DR POL Policies and counters |
||
482 | appsa APP33DR SA and counters |
||
483 | appsh APP33DR SH status and control |
||
484 | appsync APP33DR SYNC |
||
485 | apptm APP33DR TM status and control |
||
486 | arm print LLP armament info |
||
487 | arp Display ARP cache entries |
||
488 | arplist Display ARP table entries |
||
489 | atfConnect Connect an AU via ATFI |
||
490 | autodds Set error check level and/or default trace |
||
491 | banner |
||
492 | bcm Accessing and setup the internal ethernet switch |
||
493 | bh CommandName: |
||
494 | biosls List installed bios modules |
||
495 | bl list processes |
||
496 | bmlmdata List loaded modules data |
||
497 | bmpgmconfig Management of Board Manager configuration |
||
498 | bmrdump |
||
499 | bootmgr bootmgr command |
||
500 | bs Execute a number of commands and print result |
||
501 | buffel Display buffel configuration and usage |
||
502 | bvlq Get value from BVL. BVL_AREA default name if no area-name |
||
503 | capi |
||
504 | cat copy files to stdout |
||
505 | cd change the working directory |
||
506 | cease cease ... |
||
507 | cell Coli commands connected to cell |
||
508 | chkdsk Request a checkdisk on given volume |
||
509 | chmod change access mode of files |
||
510 | cls clear screen (using ANSI codes) |
||
511 | connfss This command has been disabled |
||
512 | cp copy files. If multiple names are given, the last name must be a directory. Option -R mean s recursive. |
||
513 | cpridump Dumps related info on all non-idle CPRI links. |
||
514 | createObj Creates an object. |
||
515 | cs Cell supervision |
||
516 | csti csti - csti Server status |
||
517 | cv Configuration version command |
||
518 | dbvl |
||
519 | dda Send DDA command |
||
520 | deleteObj Delete an object. |
||
521 | devinfo Display real and virtual device info |
||
522 | disableBPAIrestart Disables the Restart Board Procedure (No dumps,no stopping of DPs and no board restart) |
||
523 | disableCBCIrestart Disables the Restart Board Procedure (Dump, stop and no board restart) |
||
524 | diskcredit Disk credit command |
||
525 | domlist list all regions in one/all domain(s), optionally showing used physical memory fragments. |
||
526 | dpSetMemDumpAreas Set user memory area to be dumped for <snid> |
||
527 | dpcmd Executes a list of commands |
||
528 | dscpgfh DSCPGFH SWB debug |
||
529 | dscpgrh DSCPGROUPRH SWB RO information |
||
530 | dspMemChange Write DSP Memory |
||
531 | dspMemDump Read DSP Memory |
||
532 | dsp_nmi trigger NMI for DSP with given snid number |
||
533 | dspload Load is presented as: mean [min, max], ... |
||
534 | dspmem Memory is presented as: Pool1, Pool2, ... |
||
535 | dsvl |
||
536 | dump Print a post mortem dump.See dump -h for more options. |
||
537 | dumpcap dumps OAM IP-communication in pcap format on file |
||
538 | dumpelg dumpelg will print the error and repair logs to screen |
||
539 | echo echo arguments (-n no newline) |
||
540 | ecodes List the entries in the error code log. |
||
541 | ehb Event History Buffer |
||
542 | erasehwlog erasehwlog will erase all hw error logs in flash |
||
543 | ero Ero commands |
||
544 | errno print description of errno number |
||
545 | errorlist Print all registrered error codes. |
||
546 | etcmd Type etcmd help for detailed help. |
||
547 | ethernet ethernet shell command |
||
548 | ethmode Ethernet speed/duplex control cmd's |
||
549 | exc Exception Handling: same command as exception |
||
550 | exception Exception Handling: same command as exc |
||
551 | exit exit the current shell |
||
552 | fault fault ... |
||
553 | faultind Enables/disables sending of CPRI High Bit error rate Fault indications. |
||
554 | file Display and manage objects in 2nd filesystem. |
||
555 | flcdr FLCDR status and control |
||
556 | forever execute command forever |
||
557 | format This command has been disabled |
||
558 | formathd Format the Hard Disk |
||
559 | froInfo A detailded description |
||
560 | froInfo-lmcentral A detailded description |
||
561 | froInfo-lmmonitor A detailded description |
||
562 | froLog-lmcentral A detailded description |
||
563 | froLog-lmmonitor A detailded description |
||
564 | fssls list fss objects |
||
565 | gdbtp Command for handling trace point experiment |
||
566 | getAttrObj Get attributes for an object. |
||
567 | getDiskDataObj Get attributes for disk for an object. |
||
568 | getProcessorLoad Get processor load for a PIU. |
||
569 | getpri This command has been disabled |
||
570 | getstat Internal Event Statistics |
||
571 | gulm_reset Assert reset for GULM with given snid number |
||
572 | gz Compress/decompress file(s) |
||
573 | hdinfo Hard disk parameter information |
||
574 | hdpartition checks or harmonizes the disk partitions as per table |
||
575 | hdreadtest Hard disk read test of HD |
||
576 | hdstat Hard disk statistics printout |
||
577 | heapinfo Heap information (for proc/seg) |
||
578 | help print description of commands |
||
579 | hicap Used to enable, disable hicap or toget current hicap settings |
||
580 | hili Hardware Inventory Log Handling commands |
||
581 | histogram-cell Histogram log command |
||
582 | hooks Print all registered error, dump and reset hooks. |
||
583 | hostname show or set hostname |
||
584 | hwpid Read hardware pid from specified target |
||
585 | iacrh IACRH debug and utilities |
||
586 | ifconfig Print IP address |
||
587 | ifmcstat Dump multicast group management statistics per interface |
||
588 | iked IKE debug commands |
||
589 | ikepeerfh IKEPEERFH SWB debug |
||
590 | ikerh IKERH SWB debug |
||
591 | ikev2 IKEv2 debug commands |
||
592 | inopcnt Read or clear counter for inop on a given port nr. |
||
593 | ipac_blockHostRegi Command for blocking of IPHOSTREGI |
||
594 | ipac_blockSyncRegi Command for blocking of IPSYNCREGI |
||
595 | ipac_ipadm Status info for the IPAC IP Adm administrator program |
||
596 | ipac_ipsyncref Status info for the IPAC IP Sync Ref administrator program |
||
597 | ipcp_bh Status info for the IPCP board handler administrator program |
||
598 | ipcp_dh Status info for the distribution handler administrator program |
||
599 | ipcp_lh Status info the IPCP link handler administrator program |
||
600 | ipsecfh IPSECFH SWB debug |
||
601 | ipsectunnelfh IPSECTUNNELFH SWB debug |
||
602 | iptransmode information about ip transport settings |
||
603 | ixrh IEXS::IXRH Topology |
||
604 | jdumpthreads Dump the stack trace of Java threads |
||
605 | jheapinfo Java heap information |
||
606 | keys configure/display terminal key settings |
||
607 | killIfc Kill a named interface |
||
608 | lhsh Execute command on remote processor |
||
609 | license License server command (license <cmd>) |
||
610 | linkstat HDLC state and statistics for MP-ATF. |
||
611 | linkstat1 Statistics for BP-AU communication. |
||
612 | linkstat3 Primary Station UAC state and statistics. |
||
613 | linxeth Tool for getting information about LINX ethernet connections |
||
614 | listObj List an object. |
||
615 | list_filterobj Print filter data |
||
616 | list_traceobj Print trace data |
||
617 | listenv list environment variables for <processes> and their corresponding block. |
||
618 | listloaded List Loaded Modules |
||
619 | lkmcfg View/create/delete Linx Ethernet links |
||
620 | llog Read error log |
||
621 | ln make a link from one file to another |
||
622 | load_zone Command to display LoadZone information |
||
623 | log Log server command |
||
624 | logattributes List the attributes for a log |
||
625 | logclock Start or stop logging of the system clock. |
||
626 | logdelete Delete a log |
||
627 | login login command is not supported |
||
628 | loglevel Set loglevel for OSENET. |
||
629 | loglist Lists all available logs |
||
630 | lratdbi Dumps L-RAT Handler internal structure |
||
631 | ls list files |
||
632 | lsproc List the most recently swaped in processes |
||
633 | maciDumpSession Dump session related information |
||
634 | man man command |
||
635 | mch MCH info |
||
636 | md5 prints MD5 checksum for a file |
||
637 | mdio read registers from devices connected to mdio bus |
||
638 | memrd Read CPU Memory |
||
639 | memwatch Keeps track of memory allocations |
||
640 | memwr Write CPU Memory |
||
641 | migrate Migrate a program to a core |
||
642 | mkdir create directories |
||
643 | mm Display MM run-time state information |
||
644 | mount mount a volume |
||
645 | mpcmd Type mpcmd help for detailed help. |
||
646 | msi_list Print region data for MSI |
||
647 | mtd Execute 'mtd' commands. (debug, peek, grab, kill, etc..). type 'mtd help'for all commands |
||
648 | mv rename/move files |
||
649 | namelookup List registered services and pending lookups |
||
650 | nbs NBS |
||
651 | ncdbi Dumps nc internal structure |
||
652 | ncli MO cmd: ncli, start NCLI session to access CS. |
||
653 | ndp Display NDP cache entries |
||
654 | netstat Display net statistics |
||
655 | node_id node identity commands |
||
656 | notresocnt Read or clear counter for not resolved problems on a given port nr. |
||
657 | notresoracnt Read or clear counter for not resolved radio problems on a given port nr. |
||
658 | nsdbg nsdbg enable |
||
659 | nsinfo Nameserver information commands |
||
660 | nssfixfrequency Force regulator to enter fix frequency mode. Synchronization reference should be selected when this command is used, clock should be in locked mode. Fix frequency mode will automatically end when frequency becomes good enough. |
||
661 | nssfreerunning Force regulator to enter freerunning state. No synchronization reference should be selecte d when this command is used. |
||
662 | nssinfo Get NSS status information |
||
663 | nssmpinfo Get NSS MP status information |
||
664 | nssprodtest Access memory in DUXI to enable/disable LA_TEST_BUS or PROD_TEST_CLK_MUX in CCR register |
||
665 | nssreadhist foo |
||
666 | nssrefchangeinfo Get 20 latest reference switches |
||
667 | nssscspiinfo Get all client and subscriber info |
||
668 | nssselectregref Set the specified reference type as selectedreference in tureg and tuhwif. |
||
669 | nsssetfastlock Setting the jitter/wander tolerance level (R) for EXT REF which changes needed time for cl ock to become locked to the EXT REF. |
||
670 | nsssetfsyncreg Set FSYNC transmit interval, pattern and phase alignment. |
||
671 | nsssysclkinfo Get 20 latest SystemClock changes |
||
672 | nsstableinfo Get NSS MP table information |
||
673 | nsstugps Configuration interface for the GPSS |
||
674 | nsstupktsync Print useful information for troubleshooting |
||
675 | ntp NTP handling commands. |
||
676 | ntpconfig Set ntp server ip address | get ntp info |
||
677 | ntprecover ceases an NTP alarm and adjusts the node system time to theexternal NTP reference time |
||
678 | ospi_CXC1321315 Prints ospi status |
||
679 | partition Create, delete and list disk partitions. |
||
680 | passwd Changing password for all users |
||
681 | pboot Access of boot parameters in FLASH |
||
682 | pcapexplorer Lists dumpcap traces. Traces can be deleted with the -d option |
||
683 | pgmUpgradeObj Soft program upgrade |
||
684 | pgrun load and run a program |
||
685 | ping The command verifies the IP connectivity to a host. |
||
686 | ping6 Verify the IPv6 connectivity to another IPv6 system |
||
687 | pm With the pm command it is possible to enable trace for a set of pm counters which is used together with the trace object PM_COUNTERS |
||
688 | pm_create Create a program. |
||
689 | pm_ff Print all file formats supported. |
||
690 | pm_install Install a load module |
||
691 | pm_kill Kill program |
||
692 | pm_lmconf Print configuration for a load module image. |
||
693 | pm_lminfo Print information for a/all load module image(s). |
||
694 | pm_pgconf Print configuration for a program. |
||
695 | pm_pginfo Print information for a/all program(s). |
||
696 | pm_pt Print all program types supported. |
||
697 | pm_start Start a program. |
||
698 | pm_uninstall Uninstall a load module image |
||
699 | poolinfo List information about pools |
||
700 | ppcpm Processor performance monitoring |
||
701 | preload Loads the flash with the specified programs |
||
702 | printf ,redirect printf or end redirections |
||
703 | ps list processes |
||
704 | pwd print the working directory |
||
705 | qs List signals in a process signal queue |
||
706 | rcmd remote command execution |
||
707 | rcp Copy files or directory to remote local volumes |
||
708 | rdfpga Reads registers from the FPGA. |
||
709 | rdsfp Reads info related to given SFP. |
||
710 | readclock Read system clock [unix date format] |
||
711 | readdspeventlog Read event log from DSP |
||
712 | reload Restart the board (default warm) |
||
713 | resocnt Read or clear counter for resolved problems on a given port nr. |
||
714 | resoracnt Read or clear counter for resolved radio problems on a given port nr. |
||
715 | restartObj restarts an object. |
||
716 | restartntp Restarts NTP Kernel |
||
717 | ricm Print selected debug info. Call without args for help. |
||
718 | ricm_axcid_range Change the AxCID range. |
||
719 | ricmfilter Get the fault indication delay filter time in ms. |
||
720 | rlc Clear the ramlog |
||
721 | rld Display ramlog |
||
722 | rlw Write a string to the ramlog |
||
723 | rm remove files |
||
724 | rmdir remove (empty) directories |
||
725 | route Display or modify route table |
||
726 | rpmm ram pmm commands |
||
727 | rrt-cell Type 'rrt-cell help' to display RoseRT debugger commands |
||
728 | rrt-central Type 'rrt-central help' to display RoseRT debugger commands |
||
729 | rrt-monitor Type 'rrt-monitor help' to display RoseRT debugger commands |
||
730 | rsock Configure/query rsock deamon. |
||
731 | run Runs all intercepted processes |
||
732 | sadprint Printout of the Security Association Database (SAD) |
||
733 | sctp_config prints some SCTP-ROF configuration data |
||
734 | sctpadm cmd sctpadm lists info about all Sctp Associations in SCTP ADM |
||
735 | sctpadm_config cmd sctpadm_config lists some configuration data in SCTP ADM. |
||
736 | sctpadm_info cmd sctpadm_info lists all process info in SCTP ADM |
||
737 | sctpadmrofcmd cmd sctpadmrofcmd send trace settings to user plane. |
||
738 | sctphost Prints some SCTP-ROF configuration data, statistical information and lists association or endpoint info in SCTP Host. |
||
739 | sctphost_info cmd sctphost_info lists association or endpoint info in SCTP HOST |
||
740 | sctphost_stat cmd sctphost_stat prints some statistical information |
||
741 | sctphosttrace Configure log filtering and dumping internal log. |
||
742 | secmode |
||
743 | semi display semi area information |
||
744 | setAttrObj sets an attribute value for an object. |
||
745 | setGtpEchoOriginatorState WARNING |
||
746 | setclock Set Clock |
||
747 | setenv set/list environment variable [for block] [for process] |
||
748 | sethighsp Set terminal speed to 115200 baud |
||
749 | setkey Configure manual SAs and SPs |
||
750 | setlowsp Set terminal speed to 9600 baud |
||
751 | setpri This command has been disabled |
||
752 | sfftime Set the fault indication delay filter time in ms. |
||
753 | shell invoke shell |
||
754 | sigs List information about signals |
||
755 | sleep This command has been disabled |
||
756 | sma Prints SMA status and container data |
||
757 | sockstat List open sockets |
||
758 | spdel Delete a system parameter. |
||
759 | spdprint Printout of the Security Policy Database (SPD) |
||
760 | spedit Edit system parameters interactively |
||
761 | splitethcdbg Returns debug information fetched from split eth client. |
||
762 | splitethsdbg Returns debug information fetched from ose_split_server. |
||
763 | splitethstat Shows/clears statistics of split ethernet server/client. |
||
764 | spmod Stepwise view and modify system parameters. |
||
765 | spr Read a system parameter. |
||
766 | spray |
||
767 | spw Write a system parameter. |
||
768 | srioconf Read/write srio device registers |
||
769 | ss Show maximum process stack usage |
||
770 | stat report information about file/directory |
||
771 | supervision enables/disables supervision of DSP's |
||
772 | swcon Set or print srio switch congestion stats |
||
773 | swdump Print srio switch registers |
||
774 | switchObj Switch an object. |
||
775 | swperf Enable/Disable or print srio switch performance stats |
||
776 | swport Enable/Disable port on srio switch |
||
777 | sync synchronize volume with disk |
||
778 | syspar Get or set system parameters |
||
779 | te Trace & Error Handling commands |
||
780 | term display info about terminal |
||
781 | tetxt Adds INFO trace to CPP T&E log. |
||
782 | timers Information about timers |
||
783 | tm target monitor command |
||
784 | touch Create an empty file. |
||
785 | traceroute The command finds the routing path to a certain host. |
||
786 | traceroute6 Verify IPv6 routing to another IPv6 system |
||
787 | tsec tsec shell command, use ethernet instead |
||
788 | uart750 UART750 device driver statistics and settings |
||
789 | ue Coli commands connected to ue monitoring |
||
790 | umask display/set the current file system mask |
||
791 | unmount unmount a volume |
||
792 | unsetenv remove environment variables [from block] [from process] |
||
793 | uptime display system uptime |
||
794 | uselmc Selects an LMC |
||
795 | vii VII info |
||
796 | viilist VII state list |
||
797 | vlandev Create or remove VLAN device |
||
798 | vols report volume statistics |
||
799 | who list who is logged on |
||
800 | wrfpga Writes to a register in the FPGA. |
||
801 | zzosvarp Show the address of the OSE kernel data handle. |
||
802 | </pre> |
||
803 | |||
804 | |||
805 | </pre> |
||
806 | |||
807 | 1 | laforge | h2. @rld@ |
808 | |||
809 | Displays the RAM log, similar to @dmesg@ on linux |
||
810 | |||
811 | <pre> |
||
812 | __RAMLOG_SESSION_START__ |
||
813 | 0.000:BOS detected board type: gpm3blue |
||
814 | 0.000:Number of items in the board param list=204 |
||
815 | 0.000:INFO: system pool cleared from address 0x09400000 to 0x097fffff |
||
816 | 0.000:exec: Booting OSE5.8 (BL910375) |
||
817 | 0.000:Detected Motorola MPC 85xx, pvr: 0x80210022 |
||
818 | 0.000:exec: nested interrupts enabled |
||
819 | 0.000:exec: Number of swap in handlers found: 1 |
||
820 | 0.000:exec: Number of swap out handlers found: 1 |
||
821 | 0.000:cpu_hal_85xx: init_cpu |
||
822 | 0.000:L1CSR0=0, L1CSR1=0 |
||
823 | 0.000:mm: Using extended addressing for physical addresses. |
||
824 | 0.000:mm: superpage enabled, threshold:0x100000, tsize:0xa |
||
825 | 0.000:mm: superpage support configured to exclude executable pages from tlb1 |
||
826 | 0.000:mm: max_domains:255 @ 46d6e0 |
||
827 | 0.000:exec: install asm exception handler at address:0x400000000300 |
||
828 | 0.000:exec: install asm exception handler at address:0x400000000300 |
||
829 | 0.000:mm: Installed short (non superpage capable) ITLB miss handler |
||
830 | 0.000:cpu_hal_85xx: enable_caches (1,1). |
||
831 | 0.000:L1 D cache enabled. |
||
832 | 0.000:L1 I cache enabled. |
||
833 | 0.000: L1CSR0=0x1, L1CSR1=0x1 |
||
834 | 0.000:L2 cache enabled |
||
835 | 0.000: L2CTL=0xa0000000 |
||
836 | 0.000:mm: initialization completed. |
||
837 | 0.000:Cache bios installed. |
||
838 | 0.000:ramdump: Unable to read parameter reduce_dump_validation, attribute value. |
||
839 | 0.000:SEMI: CPP error log size = 0x00000400 |
||
840 | 0.000:SEMI: CPP trace area size = 0x00020000 |
||
841 | 0.000:exec: memory_model=1 table_extend=14 queued_signal_action=kill |
||
842 | 0.000:ramtrace tarce_create: buffer: 94000c0 trace: 94000c0, beg: 9400110 sizeof header: 50 |
||
843 | 0.000:rmm: Trace could not be recovered. |
||
844 | 0.000:rmm: krn/monitor/sys_error=debug:0 |
||
845 | 0.000:ramtrace tarce_create: buffer: 94000c0 trace: 94000c0, beg: 9400110 sizeof header: 50 |
||
846 | 0.000:rmm: Up and running. Intercept processes: No. |
||
847 | 0.000:exec: Creating isr for tick at vector 1023, reload=266668 |
||
848 | 0.000:exec: Starting syspool extender (sys_poolid:0x100000). |
||
849 | 0.000:exec: Starting mainpool extender (main_poolid:0x10000f). |
||
850 | 0.000:exec: Kernel is up. |
||
851 | ... |
||
852 | </pre> |
||
853 | |||
854 | 2 | laforge | |
855 | h2. ue |
||
856 | |||
857 | <pre> |
||
858 | $ ue |
||
859 | |||
860 | ==== UE Identity Register COLI Commands ==== |
||
861 | ue cap -racueref <ueId> -cellid <cellId> - Prints a list of capabilities for a specific Ue. |
||
862 | When racUeRef is specifyed as idType, cellId needs to be entered. |
||
863 | ue disable -ue -traceref <traceRef> - Deactivate Ue selective RBS Ue trace for specific trace ref |
||
864 | <traceref> is specified in hexcode (max 6 bytes) |
||
865 | ue disable -cellid <cellId> - Deactivate all cell selective RBS Ue traces in specific cell |
||
866 | ue disable -allcell - Deactivate all cell selective RBS Ue traces in all cells |
||
867 | ue enable -ue -traceref <traceRef> [-timeout <min>] - Activates Ue selective RBS Ue trace for specific traceRef |
||
868 | <traceref> is specified in hexcode (max 6 bytes) |
||
869 | Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes. |
||
870 | ue enable -cellid <cellId> <maxUeinCell> [-qci <qci>] [-timeout <min>] - Activates maxUeinCell [1..5] |
||
871 | number of cell selective RBS Ue traces in specific cell. |
||
872 | if qci is specified only ues with bearers with specified qci will be traced, |
||
873 | Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes. |
||
874 | ue enable -allcell -allUe [-timeout <min>] - Activates all cell selective RBS Ue traces in all cells |
||
875 | Optional -timeout <min> specified in minutes [1..720]. Default is 120 minutes. |
||
876 | ue meas -racueref <ueId> -cellid <cellId> [-detailed] - For racUeRef cellId needs to be entered. |
||
877 | -detailed gives more detailed information |
||
878 | ue print -ue -cellid <cellId> [-qci <qci>] [-v] - Print all active Ue:s identities in a specific cell. |
||
879 | -qci prints only ues with bearer with specified qci |
||
880 | -v adds more Ue data to printout |
||
881 | ue print -ue -allcell [-qci <qci>] [-v] - Print all active Ue:s identities in all cells. |
||
882 | -qci prints only ues with bearer with specified qci |
||
883 | -v adds more Ue data to printout |
||
884 | ue print -bearer -cellid <cellId> [-qci <qci>] - Print all data bearers in a specific cell. |
||
885 | -qci prints only bearers with specified qci |
||
886 | ue print -bearer -allcell [-qci <qci>] - Print all data bearers in all cells. |
||
887 | -qci prints only bearers with specified qci |
||
888 | ue print -pending - Print all Ue and Cell pending lists |
||
889 | ue print -admitted - Print all admitted Ue:s and Data Radio Bearers in all cells |
||
890 | ue reset -traceref <traceRef> - Removes Ue selective RBS Ue trace for specific Ue on specific cell. |
||
891 | <traceref> is specified in hexcode (max 6 bytes) |
||
892 | ue set -racueref <UeId> -cellid <cellId> -traceref <traceRef> - Sets Ue selective RBS Ue trace for specific Ue on specific cell. |
||
893 | <traceref> is specified in hexcode (max 6 bytes) |
||
894 | </pre> |
||
895 | |||
896 | 1 | laforge | h2. vols |
897 | |||
898 | Similar to @mount@ or @df@ on linux: |
||
899 | |||
900 | <pre> |
||
901 | volume total used free frw device unit |
||
902 | / 0K 0K 100% 0K 100% FR- |
||
903 | /null 0K 0K 100% 0K 100% FRW |
||
904 | /gzip 1K 1K 100% 0K 0% -RW none |
||
905 | /mole 1K 1K 100% 0K 0% -RW none |
||
906 | /erpdout 1K 1K 100% 0K 0% -RW none |
||
907 | /ffs 7796K 4200K 54% 3596K 46% FRW ffsdd <0-1948> |
||
908 | /d 683M 214M 31% 468M 68% FRW idedd 0 <4-1399999> |
||
909 | /rmd 950K 20K 2% 930K 98% FRW ram_disk 0 <4-1904> |
||
910 | /h 599K 197K 33% 402K 67% FR- ftldd 0 <4-1201> |
||
911 | /zip 1K 1K 100% 0K 0% -RW none |
||
912 | /c 1147M 614M 53% 533M 46% FRW idedd 0 <1400000-3749999> |
||
913 | /j 1147M 614M 53% 533M 46% FRW /c 0 <1400000-3749999> |
||
914 | 2 | laforge | </pre> |
915 | |||
916 | |||
917 | h2. cpridump |
||
918 | |||
919 | Information about the CPRI links |
||
920 | |||
921 | <pre> |
||
922 | $ cpridump |
||
923 | Port 1, Radio 1 cascadeWord 2, ruId 11, Active, AU1 CPRIi2, O&M connected, ecpAddressNo 0, O&M state 6 |
||
924 | Port 1, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
925 | Port 1, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
926 | Port 1, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
927 | Port 1, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
928 | Port 1, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
929 | Port 2, Radio 1 cascadeWord 2, ruId 21, Pending_Ind, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
930 | Port 2, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
931 | Port 2, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
932 | Port 2, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
933 | Port 2, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
934 | Port 2, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
935 | Port 3, Radio 1 cascadeWord 2, ruId 31, Pending_Ind, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
936 | Port 3, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
937 | Port 3, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
938 | Port 3, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
939 | Port 3, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
940 | Port 3, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
941 | Port 4, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
942 | Port 4, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
943 | Port 4, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
944 | Port 4, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
945 | Port 4, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
946 | Port 4, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
947 | Port 5, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
948 | Port 5, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
949 | Port 5, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
950 | Port 5, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
951 | Port 5, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
952 | Port 5, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
953 | Port 6, Radio 1 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
954 | Port 6, Radio 2 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
955 | Port 6, Radio 3 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
956 | Port 6, Radio 4 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
957 | Port 6, Radio 5 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
958 | Port 6, Radio 6 cascadeWord 0, ruId -1, Idle, AU1 CPRIi2, O&M not connected, ecpAddressNo -1, O&M state 1 |
||
959 | 1 | laforge | </pre> |