Bs11 config » History » Version 2
laforge, 02/19/2016 10:48 PM
observing bs-11 boot process using bs11_config
| 1 | 1 | laforge | bs11_config is a small commandline program that can be used to configure the [wiki:BS-11] BTS using its RS232 link. |
|---|---|---|---|
| 2 | |||
| 3 | It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as |
||
| 4 | * download of SAFETY LOAD software |
||
| 5 | * download of BTS software |
||
| 6 | * creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects) |
||
| 7 | * setting the Tx output power of the RF amplifier |
||
| 8 | |||
| 9 | == Reference == |
||
| 10 | |||
| 11 | FIXME |
||
| 12 | 2 | laforge | |
| 13 | |||
| 14 | === Observing BS-11 boot process === |
||
| 15 | |||
| 16 | This is the output of bs11_config while observing the boot process. You will see every line |
||
| 17 | many times, as the status is refreshed every five seconds. |
||
| 18 | |||
| 19 | {{{ |
||
| 20 | $./bs11_config -p /dev/ttyUSB0 |
||
| 21 | bs11_config (C) 2009 by Harald Welte and Dieter Spaar |
||
| 22 | This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY |
||
| 23 | |||
| 24 | LMT LOGON: ACK |
||
| 25 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Warm Up... |
||
| 26 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Load SMU Intended... |
||
| 27 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 28 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 29 | T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 30 | T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 31 | T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 32 | T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 33 | T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 34 | T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 35 | T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 36 | T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 37 | T-Link: Down Abis-link: Down MBCCU0: Load MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
| 38 | T-Link: Down Abis-link: Restoring MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... |
||
| 39 | T-Link: Down Abis-link: Up MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... |
||
| 40 | }}} |
