Bs11 config » History » Revision 3
« Previous |
Revision 3/12
(diff)
| Next »
laforge, 02/19/2016 10:48 PM
bs11_config is a small commandline program that can be used to configure the [wiki:BS-11] BTS using its RS232 link.
It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as * download of SAFETY LOAD software * download of BTS software * creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects) * setting the Tx output power of the RF amplifier
Reference=== Download SMU Safety Load ===
{{{
$ ./bs11_config -p /dev/ttyUSB0 -S /path/to/my/BTSBMC76.SWI
}}}
'''NOTE: OpenBSC is not providing any Firmware images for the BS-11'''
=== Minimal Configuration ===
The minimal configuration is automatically created if the BS-11 enters the ''MINIMAL CONFIG REQUIRED'' state after the SMU safety load is installed.
=== Download Software Load ===
{{{
$ ./bs11_config -p /dev/ttyUSB0 -s /path/to/my/HS011106.SWL
}}}
If the BS-11 is not in Maintenance State, it first needs to be detached from the BSC (using -D option)
{{{
$ ./bs11_config -p /dev/ttyUSB0 -D -s /path/to/my/HS011106.SWL
}}}
If you want to force a download, just add the ''-f'' parameter.
'''NOTE: OpenBSC is not providing any Firmware images for the BS-11'''
=== Observing BS-11 boot process ===
This is the output of bs11_config while observing the boot process. You will see every line
many times, as the status is refreshed every five seconds.
{{{
$./bs11_config -p /dev/ttyUSB0
bs11_config (C) 2009 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Warm Up...
T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Load SMU Intended...
T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Down MBCCU0: Load MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU...
T-Link: Down Abis-link: Restoring MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal...
T-Link: Down Abis-link: Up MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal...
}}}
Updated by laforge about 8 years ago · 3 revisions