Dct3-gsmtap » History » Version 9
fixeria, 12/17/2018 09:19 AM
1 | 1 | h1. DCT3-GSMTAP |
|
---|---|---|---|
2 | 6 | ||
3 | 8 | fixeria | {{>toc}} |
4 | 6 | ||
5 | 9 | fixeria | DCT3-GSMTAP is a command line utility to capture the GSM Um and SIM-ME interfaces from a Nokia DCT3 phone (eg. 3310) and forward via GSMTAP to the Wireshark protocol analyzer. It is released under GNU GPL version 2. |
6 | 5 | ||
7 | 1 | It is heavily based on Gammu http://www.gammu.org and Project Blacksphere http://nokix.pasjagsm.pl/help/blacksphere/sub_200nokiaos.htm which is the result of a great deal of assembly code reading, research, countless (mostly futile) searches for data sheets, cross-referencing and analysing by wumpus blacksphere@goliath.darktech.org (and others in the credits section). |
|
8 | |||
9 | |||
10 | 6 | h1. Cable |
|
11 | |||
12 | |||
13 | 2 | A serial/USB FBUS cable is required - these should be readily available, normally used for ringtones etc, try searching for "3310 data cable". Images from https://svn.berlin.ccc.de/projects/airprobe/wiki/tracelog |
|
14 | 1 | ||
15 | 7 | zecke | {{thumbnail(nokia3310_nk-33.png)}} |
16 | {{thumbnail(nokia_connect.png)}} |
||
17 | 1 | ||
18 | |||
19 | 6 | h1. Usage |
|
20 | |||
21 | |||
22 | <pre> |
||
23 | 1 | dct3-gsmtap device host |
|
24 | 6 | </pre> |
|
25 | 1 | ||
26 | The device should be something like /dev/ttyUSB0 (check dmesg once plugged in for exact name) or /dev/ttyS0. The host is where to send the GSMTAP packets to (224.0.0.1 is a good option). If you then run wireshark on the relevant interface, you'll see GSMTAP messages. |
||
27 | |||
28 | |||
29 | 6 | h1. Author |
|
30 | |||
31 | |||
32 | 3 | Duncan Salerno duncan.salerno@googlemail.com - please let me know if you have success with non-3310 phones and I'll add them to the wiki! |
|
33 | |||
34 | |||
35 | 6 | h1. Download |
|
36 | |||
37 | |||
38 | The source code is kept in the git repository at *git://git.osmocom.org/dct3-gsmtap.git*, which you can browse |
||
39 | 4 | best from http://cgit.osmocom.org/ |