Mobile » History » Revision 11
Revision 10 (Anonymous, 02/19/2016 10:49 PM) → Revision 11/15 (msuraev, 03/10/2016 02:26 PM)
{{>toc}} <pre> <pre> <pre> extended in many ways with features interesting to researchers. <pre> * perform cell (re)selection according to TS 03.22 * MM procedures like location updating, authentication, encryption * Establish MT and MO voice calls * Send and receive SMS * Perform supplementary services like USSD or call forwarding * hook it up to a PBX <pre> h2. Prerequirements It is assumed that you have already obtained the [[OsmocomBB]] source code and compiled both the host programs as well as the firmware (using a cross-compiler). Please see the general [[OsmocomBB]] GettingStarted for guidance. <pre> <pre> <pre> <pre> <pre> * prints the debug messages to stdout * sends debug messages using [[GSMTAP]] <pre> <pre> cd osmocom-bb/src/host/layer23/src/mobile/ ./mobile -i 127.0.0.1 </pre> Note: You should: <pre> <pre> * press the start button on your phone To capture sent and received packets: * launch wireshark: $ nc -u -l -p 4729 > /dev/null & wireshark -k -i lo -f 'port 4729' <pre> <pre> telnet localhost 4247 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Welcome to the [[OsmocomBB]] Control interface [[OsmocomBB]]> </pre> h2. Command Reference <pre> <pre> Usage: ./mobile Some help... -h --help this text -i --gsmtap-ip The destination IP used for GSMTAP. -v --vty-port The VTY port number to telnet to. (default 4247) -d --debug Change debug flags. </pre> <pre> TODO h2. Missing features * Handover support h2. Authors <pre>