OsmoGTM900 » History » Version 1
laforge, 01/04/2024 02:42 PM
1 | 1 | laforge | {{>toc}} |
---|---|---|---|
2 | |||
3 | h1. OsmoGTM900 |
||
4 | |||
5 | {{thumbnail(DSC00535.JPG,size=800)}} |
||
6 | |||
7 | The OsmoGTM900 is an OSWH (Open Source Hardware) carrier board for the [[TI_Calypso_Chipset]] based [[Huawei GTM900-B]] GSM modem module. It contains |
||
8 | |||
9 | * power supply circuitry |
||
10 | * Analog audio connector |
||
11 | * SIM slot (2FF sized) |
||
12 | * reset and power-down buttons |
||
13 | * A Raspberry Pi Pico implementing a dual-USB-UART bridge as well as additional control |
||
14 | * (optional) audio codec intended to be used to interface the modem via USB-Audio Class device (requires firmware modification in the Pico firmware). |
||
15 | |||
16 | h2. Hardware |
||
17 | |||
18 | The schematics in EAGLE format can be found at https://gitea.osmocom.org/electronics/osmo-small-hardware/src/branch/master/gtm900-breakout |
||
19 | |||
20 | A PDF rendering is available from https://gitea.osmocom.org/electronics/osmo-small-hardware/src/branch/master/gtm900-breakout/GTM900-breakout-schema_v3.pdf |
||
21 | |||
22 | {{thumbnail(DSC00536.JPG)}} |
||
23 | {{thumbnail(DSC00537.JPG)}} |
||
24 | |||
25 | |||
26 | h2. Firmware |
||
27 | |||
28 | The firmware source code project for the Pico can be found at https://gitea.osmocom.org/laforge/rp2040-playground/src/branch/master/osmo-gtm900 |
||
29 | |||
30 | At this point we do not yet have automatic builds, but intend to publish them at the usual location for osmocom projects, beneath https://ftp.osmocom.org/binaries/ |