= osmoload =

'''NOTE: This is incomplete and experimental.'''

This command line tool is used to write, dump and examine flash memory of supported phones.

Currently, it can be used to dump memory and semiautomatically write it.

It can also do various things that are handy for firmware development, including
interactive memory examination and bootloader capabilities for various situations.

{{{
user@host:~/osmocom-bb/src/host/osmocon$ ./osmoload help

Usage: ./osmoload [ v | -h ] [ -d tr ] [ -m {c123,c155} ] [ -l /tmp/osmocom_loader ] COMMAND ...
memget <hex-address> <hex-length> - Peek at memory
memput <hex-address> <hex-bytes> - Poke at memory
memdump <hex-address> <hex-length> <file> Dump memory to file
memload <hex-address> <file> - Load file into memory
finfo - Information about flash chips
funlock <chip> <address> - Unlock flash block
flock <chip> <address> - Lock flash block
flockdown <chip> <address> - Lock down flash block
fgetlock <chip> <address> - Get locking state of block
fprogram <chip> <address> <file> - Program file into flash
jump <hex-address> - Jump to address
jumpflash - Jump to flash loader
jumprom - Jump to rom loader
ping - Ping the loader
reset - Reset device
off - Power off device
dump - Dump loader traffic to console
}}}