List of Timer numbers » History » Revision 2
Revision 1 (neels, 09/15/2020 03:57 PM) → Revision 2/35 (neels, 09/15/2020 03:59 PM)
h1. List of Timer numbers {{toc}} {{>toc}} Below is a list of timer numbers used in Osmocom programs. Many are specified by 3GPP specifications, indicated by a T (like T3103). There are also various Osmocom specific timers, indicated by an X (like X23). h2. Timers specified by 3GPP |_.Timer|_.Program|_.Purpose| | T7 | [[OsmoBSC:]] | inter-BSC/MSC Handover outgoing, BSSMAP HO Required to HO Command timeout | | T8 | [[OsmoBSC:]] | inter-BSC/MSC Handover outgoing, BSSMAP HO Command to final Clear timeout | | T10 | [[OsmoBSC:]] | RR Assignment | | T101 | [[OsmoBSC:]] | inter-BSC/MSC Handover incoming, BSSMAP HO Request to HO Accept | | T3101 | [[OsmoBSC:]] | RR Immediate Assignment | | T3103 | [[OsmoBSC:]] | Handover | | T3105 | [[OsmoBSC:]] | Physical Information | | T3107 | [[OsmoBSC:]] | (unused) | | T3109 | [[OsmoBSC:]] | RSL SACCH deactivation | | T3111 | [[OsmoBSC:]] | Wait time before RSL RF Channel Release | | T3113 | [[OsmoBSC:]] | Paging | | T3115 | [[OsmoBSC:]] | (unused) | | T3117 | [[OsmoBSC:]] | (unused) | | T3119 | [[OsmoBSC:]] | (unused) | | T3122 | [[OsmoBSC:]] | Wait time after RR Immediate Assignment Reject | | T3141 | [[OsmoBSC:]] | (unused) | | T3212 | [[OsmoBSC:]] | Periodic Location Update timer, sent to MS (1 = 6 minutes) | h2. Timers specific to Osmocom |_.Timer|_.Program|_.Purpose| |X1 | X1 | [[OsmoBTS:]] | Time after which osmo-bts exits if regular ramp down during shut down process does not finish (s) | |X2 | X1 | [[OsmoBSC:]] | MGCP response timeout | | X2 | [[OsmoBTS:]] | Time after which osmo-bts exits if requesting transceivers to stop during shut down process does not finish (s)| | X1 | [[OsmoBSC:]] | MGCP response timeout | | X2 | [[OsmoBSC:]] | RTP stream establishing timeout | | X23002 | [[OsmoBSC:]] | Wait time for RSL Channel Activate ACK after sending RSL Channel Activate | | X23005 | [[OsmoBSC:]] | Wait time for RSL IPA CRCX ACK after sending RSL IPA CRCX | | X23006 | [[OsmoBSC:]] | Wait time for RSL IPA MDCX ACK after sending RSL IPA MDCX | h3. Legacy timer numbers: specific to Osmocom, but still defined as T timers |_.Legacy T timer|_.corresponding X timer|_.Software|_.Purpose| |T2427001 | T2427001 | - | [[OsmoMGW:|libosmo-mgcp-client]] [[OsmoBSC:]] [[OsmoMSC:]] | timeout for MGCP response from MGW | | T992427 | - | [[OsmoBSC:]] | MGCP timeout (2427 is the default MGCP port number) | | T993111 | - | [[OsmoBSC:]] | Wait time after lchan was released in error (should be T3111 + 2s) | | T993210 | - | [[OsmoBSC:]] | After L3 Complete, wait for MSC to confirm | | T999 | - | [[OsmoBSC:]] | After Clear Request, wait for MSC to Clear Command (sanity) | | T992427 | - | [[OsmoBSC:]] | MGCP timeout (2427 is the default MGCP port number) |
