SysmoUSIM-SJS1 » History » Version 1
Anonymous, 02/19/2016 10:48 PM
| 1 | 1 | [[PageOutline]] |
|
|---|---|---|---|
| 2 | = sysmoUSIM-SJS1 = |
||
| 3 | |||
| 4 | The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles). |
||
| 5 | |||
| 6 | == Command Reference == |
||
| 7 | |||
| 8 | To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard |
||
| 9 | technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11. |
||
| 10 | |||
| 11 | The below should be possible to set after authenticating with the ADM1 pin |
||
| 12 | |||
| 13 | === Setting the IMSI === |
||
| 14 | |||
| 15 | Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07) |
||
| 16 | |||
| 17 | === Setting the ICCID === |
||
| 18 | |||
| 19 | Use a standard UPDATE BINARY command on EF.ICCID (2FE2) |
||
| 20 | |||
| 21 | === Setting the Ki === |
||
| 22 | |||
| 23 | Use a standard UPATE BINARY command on EF.KI (7F20/00FF) |
||
| 24 | |||
| 25 | === Setting the OP === |
||
| 26 | |||
| 27 | Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD) |
||
| 28 | |||
| 29 | === Setting the OPC === |
||
| 30 | |||
| 31 | Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC) |
