SysmoUSIM-SJS1 » History » Revision 3
Revision 2 (Anonymous, 02/19/2016 10:48 PM) → Revision 3/21 (Anonymous, 02/19/2016 10:48 PM)
[[PageOutline]]
= sysmoUSIM-SJS1 =
The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles).
Please see [[shadysim.py]] for a tutorial on installing and removing a SIM Toolkit.
== Command Reference ==
To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard
technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11.
The below should be possible to set after authenticating with the ADM1 pin
=== Setting the IMSI ===
Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07)
=== Setting the ICCID ===
Use a standard UPDATE BINARY command on EF.ICCID (2FE2)
=== Setting the Ki ===
Use a standard UPATE BINARY command on EF.KI (7F20/00FF)
=== Setting the OP ===
Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD)
=== Setting the OPC ===
Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC)
=== Setting the Algorithm(s) ===
Use a standard UPDATE BINARY command on EF.AUTH (7FCC/6F00)
Two bytes, first byte for 2G, second byte for 3G.
Value '01' for milenage
Value '03' for COMP128v1 (only allowed for 2G)