SysmoUSIM-SJS1 » History » Revision 4
Revision 3 (Anonymous, 02/19/2016 10:48 PM) → Revision 4/21 (Anonymous, 02/19/2016 10:48 PM)
{{>toc}} h1. [[PageOutline]] = sysmoUSIM-SJS1 = The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles). Please see [[shadysim.py]] for a tutorial on installing and removing a SIM Toolkit. h2. == Command Reference == To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11. The below should be possible to set after authenticating with the ADM1 pin h3. === Setting the IMSI === Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07) h3. === Setting the ICCID === Use a standard UPDATE BINARY command on EF.ICCID (2FE2) h3. === Setting the Ki === Use a standard UPATE BINARY command on EF.KI (7F20/00FF) h3. === Setting the OP === Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD) h3. === Setting the OPC === Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC) h3. === Setting the Algorithm(s) === Use a standard UPDATE BINARY command on EF.AUTH (7FCC/6F00) Two bytes, first byte for 2G, second byte for 3G. Value '01' for milenage Value '03' for COMP128v1 (only allowed for 2G)