SysmoUSIM-SJS1 » History » Revision 5
Revision 4 (Anonymous, 02/19/2016 10:48 PM) → Revision 5/21 (laforge, 05/28/2016 12:32 PM)
{{>toc}} h1. sysmoUSIM-SJS1 The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles). Please see [[shadysim.py]] for a tutorial on installing and removing a SIM Toolkit. h2. User Manual sysmocom provides a user manual at https://www.sysmocom.de/downloads/sysmousim-manual.pdf h2. Command Reference To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11. The below should be possible to set after authenticating with the ADM1 pin h3. Setting the IMSI Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07) h3. Setting the ICCID Use a standard UPDATE BINARY command on EF.ICCID (2FE2) h3. Setting the Ki Use a standard UPATE BINARY command on EF.KI (7F20/00FF) h3. Setting the OP Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD) h3. Setting the OPC Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC) h3. Setting the Algorithm(s) Use a standard UPDATE BINARY command on EF.AUTH (7FCC/6F00) Two bytes, first byte for 2G, second byte for 3G. Value '01' for milenage Value '03' for COMP128v1 (only allowed for 2G)