RBS6402 » History » Version 1
laforge, 08/15/2019 05:09 PM
1 | 1 | laforge | h1. RBS6402 |
---|---|---|---|
2 | |||
3 | h2. connectors |
||
4 | |||
5 | h3. WAN B |
||
6 | |||
7 | this is a standard SFP connector, you can use any gigabit ethernet compatible MM or SM SFP module on it |
||
8 | |||
9 | h3. WAN A / PoE |
||
10 | |||
11 | Use a LTPoE++ capable 90W PoE injector here |
||
12 | |||
13 | h3. 48V |
||
14 | |||
15 | This is a standard 3.5mm terminal block. You can e.g. use a "Wurth Electronic 691361100002":https://octopart.com/691361100002-würth+elektronik-18818376 |
||
16 | |||
17 | h3. Fan |
||
18 | |||
19 | The fan connector has two pins with +5V and two pins with GND. You can use a "Molex 43025-0408":https://octopart.com/43025-0408-molex-24935555 part to mate it. This is just the housing, you will need crimp contacts and matching crimp tool, or you use pre-crimped wires like "Molex 79758-0010":https://octopart.com/79758-0010-molex-24727080. |
||
20 | |||
21 | The two top pins (near the latch) are GND, while the two bottom pins (near the enclosure) are +5V. |