Project

General

Profile

BS11LMT » History » Version 3

« Previous - Version 3/8 (diff) - Next » - Current version
kenny, 02/19/2016 10:47 PM


How to use LMT * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 * start LMT program

=== LMT rs232 connector pinout ===

If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:

{{{
The four E1 BNC connectors are above here.

(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V) |
+ LMT
}}}

see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg]

'''J2:'''

Image(img_6412-1.jpg, 15%)

{{{
1(GND) | | 2(TX) | |
X 0 X 0
0 0 X 0 |
3(RX)
}}}

'''RS232:'''

Image(img_6414-1.jpg, 15%)

{{{
1(GND) | | 2(TX) | | | | 3(RX) | | |
X 0 X X 0
0 0 0 0
}}}
Known Versions (and issues?)

=== LMT v4.17 ===

=== LMT v4.21 ===

Add picture from clipboard (Maximum size: 48.8 MB)