WRTU54G » History » Revision 2
« Previous |
Revision 2/11
(diff)
| Next »
laforge, 02/19/2016 10:47 PM
PageOutline = Information on the WRTU54G UMA TA =
Getting shell / console accessThe easiest part is to flash a modified firmware image that removes the root password from the /etc/passwd file in the squashfs.
You can then access the serial console and log in as root without password.
Changing the SEGW / GANC addressOn the shell of the device, change to the /nv directory and edit the two lines in rc.conf for UMA_SGW and UMA_UNC to:
{{{
UMA_SGW="my.segw.host.name"
UMA_UNC="my.unc.host.name"
}}}
Then, use the {{{rawrite -a rc.conf}}} command to store the changes to flash and reboot the system.
Adding a new CA CertificateWhile modifying the firmware, add your new CA root certificate in DER format to /ramdisk_copy/etc/kineto/ and then add the filename
and path into a new line in /ramdisk_copy/etc/kineto/init_ike.cfg, like this:
{{{
ike ca /etc/kineto/my_new_ca.der
}}}
Updated by laforge over 8 years ago · 2 revisions