Project

General

Profile

Wiki » History » Version 5

laforge, 03/04/2020 08:27 PM

1 1 neels
h1. OsmoGSMTester
2
3
The osmo-gsm-tester is software to run automated tests of real GSM hardware, foremost to verify that ongoing Osmocom software development continues to work with various BTS models, while being flexibly configurable and extendable.
4
5 3 laforge
Please refer to the "OsmoGSMTester Manual":http://ftp.osmocom.org/docs/latest/osmo-gsm-tester-manual.pdf for hardware setup and configuration.
6 1 neels
7
The actual setup to run this on ranges from a professional rack mounted solution as available from sysmocom (TODO: link/pictures) integrated with jenkins, down to manually invoked test runs on your laptop with a USB dongle modem and a "loose" BTS.
8 4 laforge
9
h2. osmo-gsm-tester setup at sysmocom
10
11
"sysmocom":https://sysmocom.de/ runs 
12
13
* a 24/7 "production" setup of osmo-gsm-tester
14
* another "rnd" setup of osmo-gsm-tester which is used for development of osmo-gsm-tester
15
16
You can find the jenkins status of both setups at https://jenkins.osmocom.org/jenkins/view/osmo-gsm-tester/
17
18
h3. "production" setup at sysmocom
19
20
The production setup has the following characteristics:
21
* LTHW BTS units (each in 1U rack-mount)
22
** sysmoBTS 1002 (GPS clock input)
23
** Octasic OCTSDR 3500 (GPS clock input)
24
** LimeSDR (10 MHz GPS-DO input)
25
** USRP B200 (10MHz GPS-DO input)
26
** sysmoCell 5000 (GPS clock input)
27
* LTHW main unit (1U rack mount)
28
** x86 single-board computer running osmo-gsm-tester
29
** 16:1 RF Distribution network for up to 16 BTSs
30
** 1:8 RF combiner/splitter for up to 8 modem banks/boards
31
* Modems
32
** FIXME: describe quantity and type of modems used
33
34
h3. "rnd" setup at sysmocom
35
36
FIXME: Describe the nature of the rnd setup.
37 5 laforge
38
39
{{include(cellular-infrastructure:MacroCommercialSupport)}}
Add picture from clipboard (Maximum size: 48.8 MB)