NanoBTSInternals » History » Version 10
laforge, 02/21/2016 10:39 AM
| 1 | 10 | laforge | *WARNING: Opening or modifying your nanoBTS will render your warranty void and might affect regulatory approval!* |
|---|---|---|---|
| 2 | 1 | laforge | |
| 3 | |||
| 4 | 9 | ahuemer | h2. nanoBTS 1800 |
| 5 | 1 | laforge | |
| 6 | 9 | ahuemer | |
| 7 | h2. PCB photographs |
||
| 8 | |||
| 9 | |||
| 10 | 1 | laforge | see attachments at the end of this page. |
| 11 | |||
| 12 | |||
| 13 | 9 | ahuemer | h3. Debug Port |
| 14 | |||
| 15 | |||
| 16 | 1 | laforge | There is a serial port for debugging. This port can be accessed via one of the two TIB RJ45 jacks, but only after |
| 17 | a small hardware modification has been made. Please reference the following picture for details. |
||
| 18 | |||
| 19 | 9 | ahuemer | After soldering those two connections, the pin-out of _TIB out_ is as follows: |
| 20 | 1 | laforge | |
| 21 | 9 | ahuemer | * Pin 7: PPC UART Tx (3.3V) |
| 22 | * Pin 8: PPC UART Rx (3.3V) |
||
| 23 | * Pin 10: Ground |
||
| 24 | 1 | laforge | |
| 25 | You can use any level shifter to get the signal up to true RS323 values, or directly connect something like a FT232. |
||
| 26 | |||
| 27 | 2 | laforge | The port runs at 115200 bps, 8N1 |
| 28 | 1 | laforge | |
| 29 | There seems to be some kind of serial console on the device, we haven't yet figured out more details. |
||
| 30 | |||
| 31 | |||
| 32 | 9 | ahuemer | h2. nanoBTS 900 |
| 33 | |||
| 34 | |||
| 35 | 1 | laforge | FIXME |
| 36 | |||
| 37 | |||
| 38 | 9 | ahuemer | h2. nanoBTS 139 (1800 1st gen I guess) |
| 39 | |||
| 40 | |||
| 41 | 1 | laforge | see attachments for hi-res. |
| 42 | 4 | tnt | |
| 43 | 10 | laforge | !nanobts_139_top_small.jpg! |
| 44 | !nanobts_139_bot_small.jpg! |
||
| 45 | !nanobts_139_digital_small.jpg! |
||
| 46 | 4 | tnt | |
| 47 | 9 | ahuemer | |
| 48 | 1 | laforge | h2. nanoBTS 110A PCS 1900MHz |
| 49 | 9 | ahuemer | |
| 50 | 8 | ahuemer | |
| 51 | 1 | laforge | nanoBTS 110A PCS 1900MHz with 4 blown capacitors @ power supply |
| 52 | 8 | ahuemer | |
| 53 | 10 | laforge | !nanobts_110a_1900_front_blown_caps_small.jpg! |
| 54 | 1 | laforge | |
| 55 | 8 | ahuemer | nanoBTS 110A PCS 1900MHz after capacitor replacement |
| 56 | |||
| 57 | 10 | laforge | !nanobts_110a_1900_front_replaced_caps_small.jpg! |
| 58 | 8 | ahuemer | |
| 59 | nanoBTS 110A PCS 1900MHz back |
||
| 60 | |||
| 61 | 10 | laforge | !nanobts_110a_1900_back_small.jpg! |
| 62 | 8 | ahuemer | |
| 63 | nanoBTS 110A PCS 1900MHz back, detail view of area with through-hole components on PCB |
||
| 64 | |||
| 65 | 10 | laforge | !nanobts_110a_1900_back_detail_small.jpg! |
