Olympia Disque with IKBS » History » Revision 21
Revision 20 (laforge, 09/29/2022 05:35 PM) → Revision 21/26 (laforge, 09/29/2022 05:44 PM)
h1. Olympia Disque with IKBS The *Olympia Disque* is an electronic daisywheel typwriter with single-line alphanumeric display, battery-buffered RAM and a proprietary 2" floppy disk drive. It was possible to enable the Olympia Disque for Teletex, either with an internal add-on-board (IKBS) or with an external device. {{thumbnail(olympia_disque.jpg, size=600)}} h2. Hardware {{thumbnail(olympia_disque_back_cover_removed.jpg, size=500)}} {{thumbnail(olympia_disque_without_top_cover.jpg,size=500)}} h3. Mainboard {{thumbnail(olympia_disque_mainboard_top.jpg,size=500)}} {{thumbnail(olympia_disque_mainboard_bot.jpg,size=500)}} {{thumbnail(olympia_disque_mainboard_stack.jpg,size=500)}} The mainboard hosts * 1x NEC D8085AHC CPU (socketed) * 4x TI TMS2764JL-35 EPROMs (IS1..IS4) * 1x Fujitsu MBM27128-30 EEPROM (IS54 via daughterboard 73.410-4066.1) * 5x HM6116LP-3 RAM (onboard) * 4x HM6116P-3 RAM (socketed) * 1x NEC D8253C-2 programmable timer IC (socketed) * 2x NEC D8255AC-5 programmable peripheral IC ** towards connector leading to daughterboard 73.200-4045.1/02L / 73.410-4044.2/00 ** towards connector X5 * various logic ICs (SN74LS245N, SN74LS02N, SN74LS393N, SN74LS04N, SN74LS138, TC40H032P, TC40HC002P * Panasonic Lithium Battery BR-2/3A 3V h4. Connectors (labels added by myself) |_.Designation|_.Pinout|_.Connects to| |X1|1x4|Power supply| |X2|1x3|Power supply| |X3|1x13|Floppy Controller| |X4|1x2|Pushbutton on rear panel near DB-15 X.21 connector| |X5|1x16|Display (X22)| |X18|2x10|Kayboard (X20) + LED/Pusbutton board (X19)| h3. Left daughterboard (67.650-3242-2) {{thumbnail(olympia_disque_left_dboard_bot.jpg,size=500)}} This board seems to be in charge of driving the electromechanics (daisywheel, paper feed, carriage, ...) * 1x Mostek MK3870/42 MCU (socketed) * 1x TMS2516JL-45 16k EPROM 2048x8 (socketed) attachment:TMS3516-45JL.pdf * 2x 74LS259PC * 1x 74LS373PC * 1x ULN2003AN * 1x LM339N * 2x SN7404N * 1x T74LS00BI * 16x TIP112 * 2x TIP125 * 1x TIP127 h4. Connectors (labels added by myself) |_.Designation|_.Pinout|_.Connects to| |X6|1x3|| |X7|1x9|Carriage belt drive step motor| |X8|1x16|Paper feed step motor| |X12|2z19|daisy-wheel/carriage| h3. Right daughterboard (73.200-4045.1/02L / 73.410-4044.2/00) {{thumbnail(olympia_disque_right_dboard_top.jpg,size=500)}} {{thumbnail(olympia_disque_right_dboard_bot.jpg,size=500)}} * 4x NEC D2732D 32k (4096 x 8) EPROM (socketed) attachment:D2732D.pdf * 1x SN74LS373N * 1x 8-way dip switch (all on in my unit) * 1x unknown DIL28 IC (label on top turns marking unreadable) h3. Display board (73.310-4029.1/05 / 73.410-4028.2/02) {{thumbnail(olympia_disque_display_top.jpg,size=500)}} {{thumbnail(olympia_disque_display_bot.jpg,size=500)}} * 1x single-row 40 character alphanumeric VFD display tube * 1x Toshiba TMP8085AP CPU (socketed) * 1x NEC D2732D 32k (4096 x 8) EPROM (socketed) attachment:D2732D.pdf * 1x RCA CDM6116AE2 RAM * 1x unknown DIL40 IC (label on top turns marking unreadable) * 10x UCN4810A VFD display driver * 1x SN74LS373 * 1x TC40H000P * 1x 74LS00 h3. Keyboard (73.410-3001-2/00) {{thumbnail(olympia_disque_keyboard_top.jpg,size=500)}} {{thumbnail(olympia_disque_keyboard_bot.jpg,size=500)}} * 1x DM74LS154N * 76x diode (for key matrix) * 77x key switch (click) * 1x 2x10 2.54mm header (bus cable connecting keyboard) h3. Button and LED panel (73.410-4012.2/02) * 1x MM5451N * 8x Diode * 28x LED 3mm green * 7x pushbutton * 1x 2x10 2.54mm header (bus cable connecting keyboard) h3. IKBS board (63.400-6101.1 / ANT 66.3820.600.00-A001 SA-Ausg.B) This is the internal extensions board turning the daisywheel typewriter into a Teletex device. {{thumbnail(olympia_disque_ikbs_top.jpg, size=500)}} {{thumbnail(olympia_disque_ikbs_bot.jpg, size=500)}} * 1x SAB 8085 A-C CPU (socketed) * 6x MBM2764-30 64k (8192 x 8) EPROM (IC1..IC6) * 10x Toshiba TC5516AP RAM (socketed, 2x DIP24, 8x DIP28) * 2x Intel D8251A UART * 1x Intel D8255A-5 * 1x Intel D8273 HDLC/SDLC controler) * various logic ICs (74HC00, 74LS03, 74LS00, 7400, 74LS04, 74LS02, 74LS74AN, 74LS32N, 74LS138N, 74LS374N, ...) * 2x UA637ARC * 1x 9638RC * 1x Varta FL3/60DK 063 battery h4. Connectors |_.Designation|_.Pinout|_.Connects to| |SV1|1x4|Power supply| |SV2|1x14|SUB-D 15 (X.21 Interface)| |SV3|1x3|Wires soldered to right daughterboard: GND, IS10, IS9). Maybe Chipselect?| |SV4|1x4|3x Teletex LED panel (X23)|