Project

General

Profile

SIMtrace Hardware » History » Version 1

laforge, 02/19/2016 10:48 PM
add page on hardware status

1 1 laforge
[[PageOutline]]
2 1 laforge
= Osmocom SIMtrace Hardware =
3 1 laforge
4 1 laforge
We're currently working on some prototypes of the Osmocom SIMtrace Hardware.
5 1 laforge
6 1 laforge
The schematics, Gerber files, etc. can be found in the 'hardware' subdirectory of the simtrace.git repository:
7 1 laforge
 * http://cgit.osmocom.org/cgit/simtrace/tree/hardware (web browsing
8 1 laforge
 * git://git.osmocom.org/simtrace (git clone URL)
9 1 laforge
10 1 laforge
We're using Kicad as EDA tool.  Most of the work on the schematics and Gerber files has been done by Kevin Redon
11 1 laforge
12 1 laforge
== Status ==
13 1 laforge
14 1 laforge
As of June 04, 2011 the components have all arrived and four PCBs are in production.  We expect to assemble the first
15 1 laforge
units around June 14, 2011.
16 1 laforge
17 1 laforge
== TODO ==
18 1 laforge
19 1 laforge
 * Verify operation of prototype
20 1 laforge
 * Add Copyright and License statement on the PCB layout
21 1 laforge
 * Decide on alternative sourcing of SIM adapter cables
22 1 laforge
 * Go into actual production
23 1 laforge
24 1 laforge
== License ==
25 1 laforge
26 1 laforge
Right now we did not release the schematics or Gerber files under any license.  However, once the design is finished,
27 1 laforge
we intend to put them under a Creative Commons CC-BY-SA (Share Alike / Attribution) license.
28 1 laforge
29 1 laforge
== Sales ==
30 1 laforge
31 1 laforge
Once the design is finished and verified, the produced units are going to be sold through [http://shop.sysmocom.de/]
Add picture from clipboard (Maximum size: 48.8 MB)