Miscellaneous Projects » SuperSignal AP 2820V

h1. Bootlog

<pre>

Percello bootrom version 1.2.8

Board: Frequency: 19.2 Mhz

Board: External boot: enabled

Board: Tcxo: internal

Board: MII mode: forward - Reduce: No

Board: External device: Eth

Board: Diagnostic console: Enabled

Board: Secure mode

Board: Flash type: NAND

Board: flash content detected

Enabling caches

Valid bootloader - Internal mode

PDR execution

Init script wait for 65536

Init script wait for 65536

Init script wait for 256

Init script wait for 560

Init script wait for 522

Init script wait for 6656

Init script wait for 6656

Init script end!!

DDR test ...DDR: lines test ...  PASSED

DDR: block test ...  PASSED

PASSED

Image loading from NAND to DDR ...PASSED

Secured device - OTP2: verification ...PASSED

Secured device - OTP3: verification ...PASSED

Running Percello bootloader

PASSED

Nand execute: load_addr: 3fe0000

Percello bootloader version 0.6 (from NAND)

Silicon type: 6000, silicon ver: 1, feature ver: 1, ROM ver: 2

Sagemcom FM-loader v2.0.4-11

Boot 1 (cold) into main system, secured

vol:   size   blocks last_leb name

  0: 0001F800      1        0 "bootdata"

  1: 0001F800      1        0 "unitdata"

  2: 004AD000     38       37 "linux-A"

  3: 004AD000     38       37 "linux-B"

  4: 007E0000     64       63 "linux-R"

  5: 00B71800     93       92 "rfs-A"

  6: 00B32800     91       90 "rfs-B"

  7: 00372000     28       27 "app-A"

  8: 00372000     28       27 "app-B"

  9: 00A17000     62       81 "data-A"

 10: 0054A800     19       42 "data-B"

 11: 0001F800      1        0 "bootdata_backup"

 12: 0001F800      1        0 "caldata"

 13: 0001F800      1        0 "caldata_backup"

 14: 0001F800      1        0 "unitdata_backup"

Unit key found and verified

TrustStor signature check passed

Group A signature check passed

Kernel A signature check passed

Root file system A signature check passed

Application file system A signature check passed

Booting system A...

Linux version 2.6.31.12-femto3xx-0.3.15 (femtobuilder@bilbo.femto.urd1.local) (gcc version 4.4.1 (Sourcery G++ Lite 4.4-303) ) #1 PREEMPT RT Wed Nov 20 13:42:34 CET 2013

ISPRAM0: PA=1f000000,Size=00008000,enabled

DSPRAM0: PA=1f400000,Size=00004000,enabled

LINUX started...

CPU revision is: 59019381 (MIPS 24Kc)

Determined physical RAM map:

 memory: 08000000 @ 00000000 (usable)

User-defined physical RAM map:

 memory: 08000000 @ 00000000 (usable)

Zone PFN ranges:

  Normal   0x00000000 -> 0x00008000

Movable zone start PFN for each node

early_node_map[1] active PFN ranges

    0: 0x00000000 -> 0x00008000

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512

Kernel command line: console=ttyS0,115200 prt_disable=0 mtdparts=prc6000-nand.0:0x20000@0(boot),-@0x20000(system) ubi.mtd=system root=/dev/mtdblock7 rootfstype=cramfs ethaddr=d8:6c:e9:14:92:be mem=128M panic=1 ramdisk=2M server=192.168.16.18 path=/rfs 

PID hash table entries: 512 (order: 9, 2048 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes

Writing ErrCtl register=00000000

Readback ErrCtl register=00000000

Memory: 123732k/131072k available (3643k kernel code, 7172k reserved, 865k data, 172k init, 0k highmem)

Real-Time Preemption Support (C) 2004-2007 Ingo Molnar

Preemptible RCU implementation.

NR_IRQS:128

CPU frequency 614.40 MHz 

Console: colour dummy device 80x25

Calibrating delay loop... 408.78 BogoMIPS (lpj=2043904)

Mount-cache hash table entries: 512

NET: Registered protocol family 16

GPIO: registering PRC6000 chip. Access protect mask = 0x0

PRC6000 FSM: count5us =1ff0000

bio: create slab <bio-0> at 0

Slow work thread pool: Starting up

Slow work thread pool: Ready

FS-Cache: Loaded

CacheFiles: Loaded

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 4, 114688 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP reno registered

NET: Registered protocol family 1

JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.

fuse init (API version 7.12)

msgmni has been set to 241

alg: No test for cipher_null (cipher_null-generic)

alg: No test for ecb(cipher_null) (ecb-cipher_null)

alg: No test for digest_null (digest_null-generic)

alg: No test for compress_null (compress_null-generic)

alg: No test for stdrng (krng)

alg: No test for stdrng (ansi_cprng)

io scheduler noop registered

io scheduler anticipatory registered (default)

io scheduler deadline registered

io scheduler cfq registered

Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

serial8250.2: ttyS0 at MMIO 0x1ec01800 (irq = 8) is a 16550A

console [ttyS0] enabled

serial8250.2: ttyS1 at MMIO 0x1ec01c00 (irq = 9) is a 16550A

brd: module loaded

loop: module loaded

nbd: registered device at major 43

Fixed MDIO Bus: probed

IMQ driver loaded successfully.

        Hooking IMQ after NAT on PREROUTING.

        Hooking IMQ before NAT on POSTROUTING.

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

STMMAC driver:

        platform registration... 

        done!

        DWMAC1000 - user ID: 0x10, Synopsys ID: 0x34

        Enhanced descriptor structure

        eth0 - (dev. name: stmmaceth - id: 0, IRQ #21

        IO base addr: 0xbe800000)

mmi: probed

eth0: PHY ID 004dd043 at 0 IRQ -1 (mii0:00) active

eth0: PHY ID 004dd043 at 1 IRQ -1 (mii0:01)

eth0: PHY ID 004dd043 at 2 IRQ -1 (mii0:02)

eth0: PHY ID 004dd043 at 3 IRQ -1 (mii0:03)

eth0: PHY ID 004dd043 at 4 IRQ -1 (mii0:04)

eth0: PHY ID 00000000 at 16 IRQ -1 (mii0:10)

eth0: PHY ID 00000000 at 17 IRQ -1 (mii0:11)

eth0: PHY ID 00000000 at 18 IRQ -1 (mii0:12)

eth0: PHY ID 00000000 at 19 IRQ -1 (mii0:13)

eth0: PHY ID 40040000 at 20 IRQ -1 (mii0:14)

eth0: PHY ID 00000000 at 21 IRQ -1 (mii0:15)

eth0: PHY ID 00000000 at 22 IRQ -1 (mii0:16)

eth0: PHY ID 00000000 at 23 IRQ -1 (mii0:17)

eth0: PHY ID 00000000 at 24 IRQ -1 (mii0:18)

eth0: PHY ID 00000000 at 25 IRQ -1 (mii0:19)

eth0: PHY ID 00000000 at 26 IRQ -1 (mii0:1a)

eth0: PHY ID 00000000 at 27 IRQ -1 (mii0:1b)

eth0: PHY ID 40040000 at 28 IRQ -1 (mii0:1c)

eth0: PHY ID 00000000 at 29 IRQ -1 (mii0:1d)

eth0: PHY ID 00000000 at 30 IRQ -1 (mii0:1e)

eth0: PHY ID 00000000 at 31 IRQ -1 (mii0:1f)

physmap platform flash device: 04000000 at 18000000

physmap-flash physmap-flash.0: map_probe failed

Unable to find NOR flash in prc_nand_driver

PRC6000 MTD NAND Driver: ECC read delay 11uS, ECC write delay 13uS

NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)

Scanning device for bad blocks

Bad eraseblock 364 at 0x000002d80000

2 cmdlinepart partitions found on MTD device prc6000-nand.0

Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":

0x000000000000-0x000000020000 : "boot"

0x000000020000-0x000008000000 : "system"

UBI: attaching mtd1 to ubi0

UBI: physical eraseblock size:   131072 bytes (128 KiB)

UBI: logical eraseblock size:    129024 bytes

UBI: smallest flash I/O unit:    2048

UBI: sub-page size:              512

UBI: VID header offset:          512 (aligned 512)

UBI: data offset:                2048

UBI: attached mtd1 to ubi0

UBI: MTD device name:            "system"

UBI: MTD device size:            127 MiB

UBI: number of good PEBs:        1022

UBI: number of bad PEBs:         1

UBI: max. allowed volumes:       128

UBI: wear-leveling threshold:    4096

UBI: number of internal volumes: 1

UBI: number of user volumes:     15

UBI: available PEBs:             0

UBI: total number of reserved PEBs: 1022

UBI: number of PEBs reserved for bad PEB handling: 10

UBI: max/mean erase counter: 216/82

UBI: image sequence number: 1755518098

UBI: background thread "ubi_bgt0d" started, PID 892

i2c /dev entries driver

prc_i2c prc_i2c.0: PRC6000 i2c bus driver. Port 0=Disabled Port 1=Enabled

oprofile: using mips/24K performance monitoring.

u32 classifier

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (2048 buckets, 8192 max)

ctnetlink v0.93: registering with nfnetlink.

IPv4 over IPv4 tunneling driver

TCP cubic registered

NET: Registered protocol family 17

NET: Registered protocol family 15

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

SCTP: Hash tables configured (established 1024 bind 1170)

timer1_set_mode(mode=1)

timer1_set_mode(mode=3)

VFS: Mounted root (cramfs filesystem) readonly on device 31:7.

Freeing unused kernel memory: 172k freed

===================================================

Welcome to Sagemcom Root File System Version 1.39.0

===================================================

---- Mounting proc file system

---- Mounting ramdisk with size 32M

---- Remounting /dev/root

---- Starting syslogd

---- Mounting sysfs

---- Mounting debugfs

---- Mounting devpts

---- Creating loopback device

---- Activating Ethernet device

---- Activating firewall

---- Loading percello modules

---- Starting marsupial

---- Reset WD

---- Configuring network using dhcp

Board's MAC address is: D8:6C:E9:14:92:BE

Unit security level: secure

305419857 1 0 0 0

Running out of bank A

Signature check ok: unitdata

WARNING: /unitdata/cert/hnb.key is missing

---- Starting Monitor

net.unix.max_dgram_qlen = 1000

---- Starting StrongSwan

Starting strongSwan 4.3.5 IPsec [starter]...

no default route - cannot cope with %defaultroute!!!

---- Starting FAP

</pre>

h2. Further reading

https://pastebin.com/FgjXZ6JF seems to be another percello based device but with Ubiquisys firmware.