Bs11 config » History » Version 3
laforge, 02/19/2016 10:48 PM
1 | 1 | laforge | bs11_config is a small commandline program that can be used to configure the [wiki:BS-11] BTS using its RS232 link. |
---|---|---|---|
2 | |||
3 | It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as |
||
4 | * download of SAFETY LOAD software |
||
5 | * download of BTS software |
||
6 | * creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects) |
||
7 | * setting the Tx output power of the RF amplifier |
||
8 | |||
9 | == Reference == |
||
10 | |||
11 | 3 | laforge | === Download SMU Safety Load === |
12 | 1 | laforge | |
13 | 3 | laforge | {{{ |
14 | $ ./bs11_config -p /dev/ttyUSB0 -S /path/to/my/BTSBMC76.SWI |
||
15 | }}} |
||
16 | |||
17 | '''NOTE: OpenBSC is not providing any Firmware images for the BS-11''' |
||
18 | |||
19 | === Minimal Configuration === |
||
20 | |||
21 | The minimal configuration is automatically created if the BS-11 enters the ''MINIMAL CONFIG REQUIRED'' state after the SMU safety load is installed. |
||
22 | |||
23 | === Download Software Load === |
||
24 | |||
25 | {{{ |
||
26 | $ ./bs11_config -p /dev/ttyUSB0 -s /path/to/my/HS011106.SWL |
||
27 | }}} |
||
28 | |||
29 | If the BS-11 is not in Maintenance State, it first needs to be detached from the BSC (using -D option) |
||
30 | {{{ |
||
31 | $ ./bs11_config -p /dev/ttyUSB0 -D -s /path/to/my/HS011106.SWL |
||
32 | }}} |
||
33 | |||
34 | If you want to force a download, just add the ''-f'' parameter. |
||
35 | |||
36 | '''NOTE: OpenBSC is not providing any Firmware images for the BS-11''' |
||
37 | 2 | laforge | |
38 | === Observing BS-11 boot process === |
||
39 | |||
40 | This is the output of bs11_config while observing the boot process. You will see every line |
||
41 | many times, as the status is refreshed every five seconds. |
||
42 | |||
43 | {{{ |
||
44 | $./bs11_config -p /dev/ttyUSB0 |
||
45 | bs11_config (C) 2009 by Harald Welte and Dieter Spaar |
||
46 | This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY |
||
47 | |||
48 | LMT LOGON: ACK |
||
49 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Warm Up... |
||
50 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 1 SUBPHASE: Load SMU Intended... |
||
51 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: No Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
52 | T-Link: Down Abis-link: Down MBCCU0: No Load MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... |
||
53 | T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC PHASE: 2 SUBPHASE: Load MBCCU... |
||
54 | T-Link: Down Abis-link: Down MBCCU0: Load BTSCAC MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... |
||
55 | T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSDRX PHASE: 2 SUBPHASE: Load MBCCU... |
||
56 | T-Link: Down Abis-link: Down MBCCU0: Load BTSDRX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... |
||
57 | T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX PHASE: 2 SUBPHASE: Load MBCCU... |
||
58 | T-Link: Down Abis-link: Down MBCCU0: Load BTSBBX MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... |
||
59 | T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load BTSARC PHASE: 2 SUBPHASE: Load MBCCU... |
||
60 | T-Link: Down Abis-link: Down MBCCU0: Load BTSARC MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
61 | T-Link: Down Abis-link: Down MBCCU0: Load MBCCU1: Load PHASE: 2 SUBPHASE: Load MBCCU... |
||
62 | T-Link: Down Abis-link: Restoring MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... |
||
63 | T-Link: Down Abis-link: Up MBCCU0: Load MBCCU1: Load PHASE: 3 SUBPHASE: Normal... |
||
64 | }}} |