Ettus USRP Family » History » Version 3
laforge, 06/13/2017 06:05 PM
| 1 | 2 | laforge | h1. Ettus USRP Family hardware |
|---|---|---|---|
| 2 | |||
| 3 | You can run OsmoTRX using the Ettus USRP family of devices. |
||
| 4 | |||
| 5 | 3 | laforge | All Ettus Research devices are supported. |
| 6 | |||
| 7 | ||*Ettus Research*||*Notes*|| |
||
| 8 | ||USRP1||Requires legacy libusrp driver and clocking modification|| |
||
| 9 | ||USRP2||10 MHz external reference required|| |
||
| 10 | ||B100|| |
||
| 11 | ||B110|| |
||
| 12 | ||B200||GPSDO or 10 MHz external reference recommended|| |
||
| 13 | ||B210||Dual channel, 10 MHz external reference recommended|| |
||
| 14 | ||N200|| |
||
| 15 | ||N210|| |
||
| 16 | ||E100|| |
||
| 17 | ||E110|| |
||
| 18 | |||
| 19 | 2 | laforge | FIXME: More USRP specific information here |
| 20 | |||
| 21 | h2. Ettus USRP B2x0 |
||
| 22 | 1 | roh | |
| 23 | Ettus B2x0 output signal levels |
||
| 24 | |_.band |_.arfcn |_.tx-attenuation |_.signal level (dBm) | |
||
| 25 | | 850 | 128 | 0 | 13.2 | |
||
| 26 | | 850 | 189 | 0 | 13.2 | |
||
| 27 | | 850 | 251 | 0 | 13.2 | |
||
| 28 | | 900 | 0 | 0 | 13.1 | |
||
| 29 | | 900 | 86 | 0 | 13.1 | |
||
| 30 | | 900 |1023 | 0 | 13.1 | |
||
| 31 | | 1800 | 512 | 0 | 6.9 | |
||
| 32 | | 1800 | 698 | 0 | 6.9 | |
||
| 33 | | 1800 | 870 | 50 | -42.0 | |
||
| 34 | | 1800 | 870 | 25 | -16.7 | |
||
| 35 | | 1800 | 870 | 10 | -2.1 | |
||
| 36 | | 1800 | 870 | 0 | 7.1 | |
||
| 37 | | 1800 | 885 | 0 | 6.9 | |
||
| 38 | | 1900 | 512 | 0 | 7.2 | |
||
| 39 | | 1900 | 661 | 0 | 7.3 | |
||
| 40 | | 1900 | 810 | 0 | 7.4 | |
||
| 41 | |||
| 42 | these values were measured by sysmocom on a agilent E4406 with an ettus B210 |
