Ettus USRP Family » History » Revision 4
Revision 3 (laforge, 06/13/2017 06:05 PM) → Revision 4/9 (laforge, 06/13/2017 06:06 PM)
h1. Ettus USRP Family hardware You can run OsmoTRX using the Ettus USRP family of devices. All Ettus Research devices are supported. |*Ettus Research*|*Notes*| ||*Ettus Research*||*Notes*|| |USRP1|Requires ||USRP1||Requires legacy libusrp driver and clocking modification| modification|| |USRP2|10 ||USRP2||10 MHz external reference required| required|| |B100|| ||B100|| |B110|| ||B110|| |B200|GPSDO ||B200||GPSDO or 10 MHz external reference recommended| recommended|| |B210|Dual ||B210||Dual channel, 10 MHz external reference recommended| recommended|| |N200|| ||N200|| |N210|| ||N210|| |E100|| ||E100|| |E110|| ||E110|| FIXME: More USRP specific information here h2. Ettus USRP B2x0 Ettus B2x0 output signal levels |_.band |_.arfcn |_.tx-attenuation |_.signal level (dBm) | | 850 | 128 | 0 | 13.2 | | 850 | 189 | 0 | 13.2 | | 850 | 251 | 0 | 13.2 | | 900 | 0 | 0 | 13.1 | | 900 | 86 | 0 | 13.1 | | 900 |1023 | 0 | 13.1 | | 1800 | 512 | 0 | 6.9 | | 1800 | 698 | 0 | 6.9 | | 1800 | 870 | 50 | -42.0 | | 1800 | 870 | 25 | -16.7 | | 1800 | 870 | 10 | -2.1 | | 1800 | 870 | 0 | 7.1 | | 1800 | 885 | 0 | 6.9 | | 1900 | 512 | 0 | 7.2 | | 1900 | 661 | 0 | 7.3 | | 1900 | 810 | 0 | 7.4 | these values were measured by sysmocom on a agilent E4406 with an ettus B210