Project

General

Profile

Actions
Summary

Issues

Filters

Apply Clear

# Tracker Status Priority Subject Assignee Updated Related issues
1724 Feature Rejected Low extend wireshark dissector for SIM/USIM traces 09/28/2022 08:07 AM Actions
1459 Bug Resolved Low send a flag tagging the ATR from the card laforge 02/06/2021 01:32 PM Actions
1456 Bug Closed Normal make sure there is solder mask between pads of SAM7 tsaitgaist 02/20/2016 06:39 PM Actions
1455 Feature Closed High try to improve trace width / blocking caps tsaitgaist 02/20/2016 06:39 PM Actions
1454 Feature Closed High add "sysmocom" text into the copper layer tsaitgaist 02/20/2016 06:39 PM Actions
1453 Feature Closed High Move C21 closer to VCC_SIM pad tsaitgaist 02/20/2016 06:39 PM Actions
1452 Bug Closed High move C14 directly to pad 4 of IC2 tsaitgaist 02/20/2016 06:40 PM Actions
1449 Bug Closed High no solder mask between the pads of the AT91SAM7 tsaitgaist 02/20/2016 06:41 PM Actions
1448 Bug Closed High silk screen print on top of soldering pads tsaitgaist 02/20/2016 06:41 PM Actions
1447 Bug Closed High C14 is too far from LDO, causes oscillation tsaitgaist 02/20/2016 06:41 PM Actions
1446 Bug Closed High test ticket to check notification tsaitgaist 02/20/2016 06:41 PM Actions
1445 Feature Closed Low Some component labels (resistors/capacitors) are not readable tsaitgaist 02/20/2016 06:41 PM Actions
1444 Feature Closed High Adapt to different shottky diode footprint tsaitgaist 02/20/2016 06:41 PM Actions
1443 Feature Closed High Adapt to different SPI flash (foot print) tsaitgaist 02/20/2016 06:42 PM Actions
1442 Feature Closed High Make LED footprints 0805 instead of 0603 tsaitgaist 02/20/2016 06:42 PM Actions
1441 Feature Closed High Use through-hole 2.5mm jack tsaitgaist 02/20/2016 06:42 PM Actions
1440 Feature Closed High Use through-hole mini-USB-B socket tsaitgaist 02/20/2016 06:42 PM Actions
1439 Feature Closed Low move ERASE and TEST jumper a tint bit, so a 1x4pin header works tsaitgaist 02/20/2016 06:42 PM Actions
1437 Bug Closed Immediate on resistance of bus switch not acceptable, at least not for Vcc tsaitgaist 02/20/2016 06:42 PM Actions
1436 Feature Closed Normal add VCC_PHONE to an unused GPIO tsaitgaist 02/20/2016 06:42 PM Actions
1435 Bug Closed Normal sim card detect does not work (SW_SIM) tsaitgaist 02/20/2016 06:43 PM Actions
1434 Bug Closed High socket for FPC SIM adapter is mechanically incompatible with rebelsim fpc tsaitgaist 02/20/2016 06:43 PM Actions
1433 Feature Closed Normal use 90 degree angled jumpers for ERASE and TEST tsaitgaist 02/20/2016 06:44 PM Actions
1432 Bug Closed Normal simtrace: bootloader switch without function tsaitgaist 02/20/2016 06:44 PM Actions
1431 Bug Closed High use PA16 for UDP_PUP as required by SAM-BA tsaitgaist 02/20/2016 06:44 PM Actions
(1-25/32) Per page: 25, 50

Also available in: Atom CSV PDF

Add picture from clipboard (Maximum size: 48.8 MB)