Project

General

Profile

Actions
Summary

Issues

Filters

Apply Clear

# Tracker Status Priority Subject Assignee Updated Related issues
1424 Bug Closed High simtrace pinout of tps73633 is wrong tsaitgaist 02/20/2016 06:45 PM Actions
1425 Bug Closed High simtrace pinout of bootloader / reset switch is wrong tsaitgaist 02/20/2016 06:44 PM Actions
1426 Bug Closed Normal simtrace component names on silk screen unreadable tsaitgaist 02/20/2016 06:44 PM Actions
1427 Bug Closed High simtrace BC847 footprint has B / E switched tsaitgaist 02/20/2016 06:44 PM Actions
1428 Feature Closed Normal increase default trace width in simtrace pcb tsaitgaist 02/20/2016 06:44 PM Actions
1429 Feature Closed Normal usb jack type is really hard to manually solder tsaitgaist 02/20/2016 06:44 PM Actions
1430 Feature Closed Normal clearly indicate location of 'pin 1' of components and connectors tsaitgaist 02/20/2016 06:44 PM Actions
1431 Bug Closed High use PA16 for UDP_PUP as required by SAM-BA tsaitgaist 02/20/2016 06:44 PM Actions
1432 Bug Closed Normal simtrace: bootloader switch without function tsaitgaist 02/20/2016 06:44 PM Actions
1433 Feature Closed Normal use 90 degree angled jumpers for ERASE and TEST tsaitgaist 02/20/2016 06:44 PM Actions
1434 Bug Closed High socket for FPC SIM adapter is mechanically incompatible with rebelsim fpc tsaitgaist 02/20/2016 06:43 PM Actions
1435 Bug Closed Normal sim card detect does not work (SW_SIM) tsaitgaist 02/20/2016 06:43 PM Actions
1436 Feature Closed Normal add VCC_PHONE to an unused GPIO tsaitgaist 02/20/2016 06:42 PM Actions
1437 Bug Closed Immediate on resistance of bus switch not acceptable, at least not for Vcc tsaitgaist 02/20/2016 06:42 PM Actions
1438 Feature Closed Normal add ID-1 slot to SIMtrace tsaitgaist 02/20/2016 06:42 PM Actions
1439 Feature Closed Low move ERASE and TEST jumper a tint bit, so a 1x4pin header works tsaitgaist 02/20/2016 06:42 PM Actions
1440 Feature Closed High Use through-hole mini-USB-B socket tsaitgaist 02/20/2016 06:42 PM Actions
1441 Feature Closed High Use through-hole 2.5mm jack tsaitgaist 02/20/2016 06:42 PM Actions
1442 Feature Closed High Make LED footprints 0805 instead of 0603 tsaitgaist 02/20/2016 06:42 PM Actions
1443 Feature Closed High Adapt to different SPI flash (foot print) tsaitgaist 02/20/2016 06:42 PM Actions
1444 Feature Closed High Adapt to different shottky diode footprint tsaitgaist 02/20/2016 06:41 PM Actions
1445 Feature Closed Low Some component labels (resistors/capacitors) are not readable tsaitgaist 02/20/2016 06:41 PM Actions
1446 Bug Closed High test ticket to check notification tsaitgaist 02/20/2016 06:41 PM Actions
1447 Bug Closed High C14 is too far from LDO, causes oscillation tsaitgaist 02/20/2016 06:41 PM Actions
1448 Bug Closed High silk screen print on top of soldering pads tsaitgaist 02/20/2016 06:41 PM Actions
(1-25/33) Per page: 25, 50

Also available in: Atom CSV PDF

Add picture from clipboard (Maximum size: 48.8 MB)