Bug #2663
closed
osmo-hnbgw missing reasonable default configuration for sigtran
Added by laforge over 6 years ago.
Updated about 6 years ago.
Description
unlike e.g. osmo-bsc, osmo-hnbgw doesn't have a reasonable "sane" default configuration. The config includes "127.0.0.5" as an IP address which is not mentioned/documented anywhere. Also, it uses the undocumented hard-coded point code.
By default, it should probably use:
- 127.0.0.1 as STP address
- 2905 as STP port
- 0.23.2 as dest point-code for the MSC (the MSC already uses this as default for IuCS)
- 0.23.4 as dest point-code for the SGSN (TODO: OsmoSGSN needs to use this as default)
- 0.23.5 as its local point code
- Related to Bug #2664: document our default point codes in the wiki added
- Related to Bug #2665: OsmoSGSN doesn't listen on reasonable default point code added
- Assignee changed from laforge to neels
- Status changed from New to In Progress
- % Done changed from 0 to 90
- 127.0.0.1 as STP address
- 2905 as STP port
does so.
So far uses 127.0.0.5 as local ip-address to connect to STP, which doesn't make any sense.
https://gerrit.osmocom.org/5166
- 0.23.2 as dest point-code for the MSC (the MSC already uses this as default for IuCS)
- 0.23.4 as dest point-code for the SGSN (TODO: OsmoSGSN needs to use this as default)
- 0.23.5 as its local point code
According to [[Cellular Infrastructure:Point Codes]] the MSC PC is 0.23.1. Merged by https://gerrit.osmocom.org/4977 a while ago.
- Status changed from In Progress to Resolved
- % Done changed from 90 to 100
- Status changed from Resolved to Closed
Also available in: Atom
PDF
