= compal_dnload =

Using compal_dnload on your (Linux) PC, you can download arbitrary object code into your Compal-made Calypso-based phone.

Usage * Connect your Compal phone to a serial port of your PC, using a [wiki:CalypsoSerialCable] (3.3V RS232 on 2.5mm headphone jack) * Start the compal_dnload program like this {{{
$ ./compal_dnload /path/to/your/object_code [ /dev/ttyUSBn ]
}}} * Push the power-on button of your phone (short push, not like a regular phone boot!) * Observe the following output: {{{
got 1 bytes from modem, data looks like: 04
got 1 bytes from modem, data looks like: 81
got 1 bytes from modem, data looks like: 1b
got 1 bytes from modem, data looks like: f6
got 1 bytes from modem, data looks like: 02
got 1 bytes from modem, data looks like: 00
got 1 bytes from modem, data looks like: 41
got 1 bytes from modem, data looks like: 01
got 1 bytes from modem, data looks like: 40
Received PROMPT1 from phone, responding with CMD
got 1 bytes from modem, data looks like: 1b
got 1 bytes from modem, data looks like: f6
got 1 bytes from modem, data looks like: 02
got 1 bytes from modem, data looks like: 00
got 1 bytes from modem, data looks like: 41
got 1 bytes from modem, data looks like: 02
got 1 bytes from modem, data looks like: 43
Received PROMPT2 from phone, starting download
got 1 bytes from modem, data looks like: 1b
got 1 bytes from modem, data looks like: f6
got 1 bytes from modem, data looks like: 02
got 1 bytes from modem, data looks like: 00
got 1 bytes from modem, data looks like: 41
got 1 bytes from modem, data looks like: 03
got 1 bytes from modem, data looks like: 42
Received DOWNLOAD ACK from phone, your code is running now!
}}} * Observe further output of the serial port generated by the code you have downloaded {{{
Hello World from C program code ======================================================================
Device ID code: B4FB
Device Version code: 0000
ARM ID code: FFF3
cDSP ID code: 0128
Die ID code: 6397191EFA039BE7 ======================================================================
REG_DPLL=2002
CNTL_ARM_CLK=F081
CNTL_CLK=FF51
CNTL_RST=FFF7
CNTL_ARM_DIV=FFF9 ======================================================================
REG_DPLL=2193
CNTL_ARM_CLK=F081
CNTL_CLK=FF51
CNTL_RST=FFF7
CNTL_ARM_DIV=FFF9 ======================================================================
Releasing DSP from Reset
Loading initial DSP bootcode
Releasing DSP from Reset
Setting some api_ndb values
Setting API NDB parameters
DSP Download Status: 0001
DSP API Version: 0DC4 6308
Finishing download phase
DSP Download Status: 0002
DSP API Version: 3606 0000
}}} Known Problems

Somehow we're not always getting the timing quite right. If you never get the PROMPT2 or DOWNLOAD ACK, you might
be affected by this bug.

The bug seems to resolve around the following line in the source. Try to comment it out and recompile: {{{
/* write some dummy character that is not used */
write(serial_fd, &running_xor, 1);
}}}

Any additional help to resolve this bug is mostly welcome!