Project

General

Profile

Accelerate3g5 -- blobb » History » Version 13

blobb, 03/15/2017 09:54 PM

1 1 blobb
h1. Accelerate3g5 -- blobb
2 2 blobb
3
h2. Summary
4
5 3 blobb
Trying to come up with a fuzzing interface.
6
7 2 blobb
h3. Participants
8
9
* André Boddenberg (email: dr.blobb@gmail.com)
10
11
h2. Details
12 3 blobb
13
First setting up the femtocell and understand basics of UMTS communication. 
14
Collecting information e.g. slides, talks, docu about fuzzing of wireless protocols.
15 6 blobb
Writing some code to craft requests and run fuzz tests against subscriber.
16 3 blobb
17 4 blobb
Note: first time fuzzing.
18 2 blobb
19
h2. Journal
20
21 7 blobb
_2017-03-07_
22
pick up package at the sysmocom office.
23
having an informative conversation with Neels about jenkins.osmocom.
24
25 2 blobb
_2017-03-12_
26
Set up wiki page.
27 10 blobb
Seeing femtocell on network interface and knocking ports:
28 2 blobb
29 8 blobb
> 22/tcp    open  ssh
30
> 8089/tcp  open  http
31 11 blobb
> 8090/tcp  open  telnet
32 8 blobb
> 10002/tcp open  documentum (needs investigation)
33 7 blobb
34 8 blobb
Compiled source as described, but couldn't configure/launch CN successfully (yet).
35 13 blobb
Next time trying Neels' launch script and same IP range.
36 7 blobb
 
37 8 blobb
Note: Feeling the need for an additional LAN port to not interfere with eth0.
38 1 blobb
39 10 blobb
_2017-03-15_
40 12 blobb
Reading data sheet about ip.access nano3G S8.
41
Configuring femtocell via telnet (dry run).
42
Running in HLR issue mentioned in wiki when invoking run.sh.
43
44 7 blobb
45
46 2 blobb
h2. Conclusions
47 1 blobb
48 7 blobb
additional LAN port is great.
Add picture from clipboard (Maximum size: 48.8 MB)