BildTel 001 » History » Revision 5
Revision 4 (laforge, 10/28/2023 04:37 PM) → Revision 5/27 (laforge, 10/28/2023 04:38 PM)
h1. BildTel 001
The Telekom-branded *BildTel 001* was likely the first commercially available ISDN video phone in Germany.
{{thumbnail(20231028_114259.jpg,size=400)}}
{{thumbnail(20231028_114402.jpg,size=400)}}
h2. Architecture
The system consists of the following parts:
* A TV screen with built-in [[BTX__Prestel__Videotex__Minitel|BTX]] decoder (inherited from [[LOEWE_Multitel_TV10]])
* A keyboard + phone-receiver combo (inherited from [[LOEWE_Multitel_TV10]])
* A _desktop-computer-like_ box called the Codec (containing the actual ISDN video telephony part, implemented by AEG/OLYMPIA)
* A video camera
The BTX Terminal [[LOEWE_Multitel_TV10]] was used as the "user interface" for the device, adding the _codec_ box to turn it into a video phone.
h4. Codec unit
{{thumbnail(20231028_114437.jpg,size=400)}}
h4. TV Camera
{{thumbnail(20231028_115010.jpg,size=400)}}
h4. TV Unit
{{thumbnail(20231028_114503.jpg,size=400)}}
h4. Keyboard/receiver unit
{{thumbnail(20231028_114558.jpg,size=400)}}
{{thumbnail(20231028_114639.jpg,size=400)}}
{{thumbnail(20231028_141412.jpg)}}
{{thumbnail(20231028_142128.jpg)}}
{{thumbnail(20231028_142246.jpg)}}
{{thumbnail(20231028_142251.jpg)}}
h3. Connections
h4. Codec unit
* connects to ISDN basic-rate S0 interface using 8P8C/RJ45 plug
* has two proprietary connectors for attaching video cameras
* has two SCART connectors (one for audio/video output to the TV)
* has a TAE jack for attaching an analog phone for the audio port (connected to the combined keyboard/receiver unit by default)
* has another TAE jack (purpose unknown)
* has a V.24 interface on a SUB-D 9 connector which connects to the built-in BTX decoder of the TV unit
h4. TV Camera
* connects to the Codec unit using a proprietary high-density connector that appears to carry both video and power
h4. TV unit
* has an RF input for TV broadcast signals (PAL)
* has a SCART input for baseband audio/video from peripherals (like the Codec unit)
* has a DIN speaker output for attaching an external speaker
* has a built-in BTX decoder with
** an unused DIN port intended to connect to the [[DBT-03]] BTX-Modem (not used in the ISDN video application)
** an unused centronics port
** an auxiliary V.24 port on a DIN connector interfacing the SUB-D 9 of the Codec unit
h4. Keyboard/receiver unit
* has a cable with TAE connector attached (connects to codec unit)
