Xalyo Systems XS-155 » History » Version 3
laforge, 02/20/2022 03:54 PM
1 | 1 | laforge | h1. Xalyo Systems XS-155 |
---|---|---|---|
2 | |||
3 | This is a four-port STM-1 interface card by Xalyo Systems. It is based around the Wintegra processor. |
||
4 | |||
5 | The card is in a mezzanine carrier format, but using an adapter such as the XS-PCIE, it can be used in a normal PCIe slot. |
||
6 | |||
7 | h2. XS-155 |
||
8 | |||
9 | 3 | laforge | The board design seems to consist of the following three major parts: |
10 | * Wintegra WinPath WIN787FPC-200B1 network processor (attachment:WIN787.pdf) |
||
11 | * PMC S/UNI 155 TETRA PM-5351-BGI _Quad 155 Mbit/s ATM and Packet Over SONET Physical Layer Device_ (attachment:PM5351.pdf) |
||
12 | * Tundra PowerspanII CA91L8269B-100CLY |
||
13 | |||
14 | 1 | laforge | {{thumbnail(Xalyo_XS-155_bottom_in_pcie_carrier.jpg)}} |
15 | |||
16 | h2. XS-PCIE |
||
17 | |||
18 | 2 | laforge | This is a carrier board for the mezzanine form factor of the XS-155. It contains a PLX PEX8112 PCI to PCIe bridge (attachment:PEX8112.pdf), so that the carrie board can be plugged in a modern PCIe slot. |
19 | |||
20 | 1 | laforge | {{thumbnail(Xalyo_XS-PCIE_bottom.jpg)}} |