SIMtrace Hardware » History » Version 8
laforge, 02/19/2016 10:49 PM
restructure the credits section
| 1 | 1 | laforge | [[PageOutline]] |
|---|---|---|---|
| 2 | 1 | laforge | = Osmocom SIMtrace Hardware = |
| 3 | 1 | laforge | |
| 4 | 7 | laforge | This page is dedicated to the Hardware for Osmocom [wiki:SIMtrace], which looks like this: |
| 5 | 7 | laforge | |
| 6 | 3 | laforge | [[Image(simtrace_10_front.jpg, 33%)]] |
| 7 | 1 | laforge | |
| 8 | 7 | laforge | STATUS: We have received the first batch of 100 units from the SMT factory (Version v1.0p) |
| 9 | 1 | laforge | |
| 10 | 4 | laforge | == Schematics, Gerber & Co == |
| 11 | 4 | laforge | |
| 12 | 1 | laforge | The schematics, Gerber files, etc. can be found in the 'hardware' subdirectory of the simtrace.git repository: |
| 13 | 1 | laforge | * http://cgit.osmocom.org/cgit/simtrace/tree/hardware (web browsing |
| 14 | 1 | laforge | * git://git.osmocom.org/simtrace (git clone URL) |
| 15 | 1 | laforge | |
| 16 | 2 | laforge | We're using Kicad as EDA tool. Most of the work on the schematics and Gerber files has been done by Kevin Redon, |
| 17 | 1 | laforge | based on the original design by Harald Welte. |
| 18 | 5 | laforge | |
| 19 | 1 | laforge | The latest schematics are also available as an attachment to this page. |
| 20 | 1 | laforge | |
| 21 | 7 | laforge | === Revisions === |
| 22 | 1 | laforge | |
| 23 | 7 | laforge | === v1.0p (1.0 Production branch) === |
| 24 | 7 | laforge | |
| 25 | 7 | laforge | This is identical to v1.0 on the schematics side, we simply altered the footprints of some components to accommodate |
| 26 | 7 | laforge | whatever the SMT factory had in stock. Specifically the LED are 0805 instead of 0603, and the shottky diodes are |
| 27 | 7 | laforge | in a slightly awkward looking very large package. |
| 28 | 7 | laforge | |
| 29 | 7 | laforge | Downloads: |
| 30 | 7 | laforge | * FIXME |
| 31 | 7 | laforge | |
| 32 | 7 | laforge | === v1.0 === |
| 33 | 7 | laforge | |
| 34 | 7 | laforge | This is the first stable release. We built some 5 prototypes from this version. |
| 35 | 7 | laforge | |
| 36 | 7 | laforge | Downloads: |
| 37 | 7 | laforge | * [[Image(simtrace_schem_v10.pdf)]] |
| 38 | 7 | laforge | * [[Image(simtrace_10_gerber.zip)]] |
| 39 | 7 | laforge | |
| 40 | 7 | laforge | === v0.9 === |
| 41 | 7 | laforge | |
| 42 | 7 | laforge | As of June 04, 2011 the components had all arrived and four PCBs were in production. We assemble the first |
| 43 | 1 | laforge | units around June 14, 2011. |
| 44 | 1 | laforge | |
| 45 | 7 | laforge | As of June 21st, we had four re-worked prototypes that are fully functional. |
| 46 | 1 | laforge | |
| 47 | 7 | laforge | === v0.8 === |
| 48 | 1 | laforge | |
| 49 | 7 | laforge | Never really was an official release. However, a friend took the unfinished Gerber files and built 5 units. |
| 50 | 1 | laforge | |
| 51 | 7 | laforge | Since the Gerber was not finished, we had to do lots and lots of re-work in order to make them work at all. |
| 52 | 7 | laforge | |
| 53 | 1 | laforge | == License == |
| 54 | 1 | laforge | |
| 55 | 1 | laforge | Schematics and Gerber files are released under the Creative Commons CC-BY-SA (Share Alike / Attribution) license. |
| 56 | 1 | laforge | |
| 57 | 1 | laforge | == Sales == |
| 58 | 1 | laforge | |
| 59 | 7 | laforge | Once the design is finished and verified, the produced units are going to be sold through the upcoming web-shop of sysmocom GmbH ([http://shop.sysmocom.de/]) |
| 60 | 2 | laforge | |
| 61 | 7 | laforge | Sales are expected to commence in mid August. Units will be available during the 2011 CCC Camp. |
| 62 | 7 | laforge | |
| 63 | 7 | laforge | == Credits == |
| 64 | 7 | laforge | |
| 65 | 8 | laforge | * Harald Welte |
| 66 | 8 | laforge | * Original project idea, schematic design |
| 67 | 8 | laforge | * Olimex SAM7-P64 based prototypes |
| 68 | 8 | laforge | * Firmware and host software |
| 69 | 8 | laforge | * Kevin Redon |
| 70 | 8 | laforge | * KiCAD work on schematics, footprints and routing |
| 71 | 8 | laforge | * Soldering of some prototypes |
| 72 | 8 | laforge | * [http://sysmocom.de/ sysmocom - systems for mobile communications GmbH] |
| 73 | 8 | laforge | * funding for hardware prototyping (PCB, components, etc) |
| 74 | 8 | laforge | * Christian Daniel |
| 75 | 8 | laforge | * post-production flashing + debugging, design + test of v1.0p rework |
