Project

General

Profile

Actions

Dimetra EBTS Site Controller » History » Revision 2

« Previous | Revision 2/12 (diff) | Next »
laforge, 02/19/2016 10:52 PM


= Integrated Site Controller (CLN1480A) =

This is a unit that interfaces up to 8 Base Radios with the core network of the Dimetra TETRA network (SwMI).

Hardware-wise, it is a PowerPC based system, looking very much like an old-fashioned PC mainboard with both ISA and PCI slots.

The mainboard houses the PowerPC CPU and it has slots for RAM.

There are some extension cards plugged into the system:

  • Clock generation card (ISA, full length). * has an integrated GPS receiver, to which you attach a GPS antenna * generates the reference 5MHz clock distributed over Coaxial cable to the Base Radios
  • Ethernet Card using DEC tulip chipset (PCI) * This card is what talks to the Base Radios (BR) via 10-Base-2
  • Unknown card with RJ-45 jack (REDUND) on the back. Might be E1

There are further inputs and outputs on the system:

  • A DB-15 jack for X.21 synchronous serial backhaul (2048Mbps)
  • FIXME
  • A RS-232 serial port for local configuration
Images

Updated by laforge over 8 years ago · 2 revisions

Add picture from clipboard (Maximum size: 48.8 MB)