Project

General

Profile

Actions

Rohde & Schwarz (RS BICK Mobilfunk) TETRA BSC411

This is a TETRA Base Station Controller within the R&S / BICK TETRA network.

Interestingly, there are several hints indicating that it was originally designed by DAMM and later bought or licensed
by R&S.

Hardware

The hardware is based on an Intel x86 embedded ISA board, which is plugged onto a "mainboard" containing four E1 interfaces.
interior view of BSC411, top side.

For more pictures, check the attachments to this page.

Software

The software is based on Windows NT 4.0 Embedded, stored on a Compact Flash card.

Files (5)
P1050482_small.jpg View P1050482_small.jpg 1.03 MB interior view of BSC411, top side. laforge, 06/17/2011 09:14 PM
P1050483_small.jpg View P1050483_small.jpg 998 KB close-up of GPS module laforge, 06/17/2011 09:14 PM
P1050485_small.jpg View P1050485_small.jpg 946 KB close-up of E1 interface section laforge, 06/17/2011 09:15 PM
P1050487_small.jpg View P1050487_small.jpg 950 KB close-up of Embedded x86 ISA board (top side) laforge, 06/17/2011 09:15 PM
P1050489_small.jpg View P1050489_small.jpg 952 KB close-up of Embedded x86 ISA board (bottom side) laforge, 06/17/2011 09:16 PM

Updated by laforge about 8 years ago ยท 4 revisions

Add picture from clipboard (Maximum size: 48.8 MB)