Actions
Bug #4639
closedpower ramping shows a weird behaviour after poweroff
Start date:
07/02/2020
Due date:
% Done:
100%
Spec Reference:
Description
killing osmo-bsc with ctrl-c leads to this on the osmo-trx-uhd side:
Thu Jul 2 14:32:30 2020 DTRXDDL <0003> Transceiver.cpp:1032 [tid=139738993161984][chan=0] Rx TRXD message (hdr_ver=1): fn=1765622, tn=7, burst_len=148 Thu Jul 2 14:32:30 2020 DMAIN <0000> Transceiver.cpp:357 [tid=139739153299392] Stopping the device UUThu Jul 2 14:32:30 2020 DMAIN <0000> Transceiver.cpp:370 [tid=139739153299392] Transceiver stopped Thu Jul 2 14:32:30 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:32:30 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:32:30 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:32:31 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:32:31 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:31 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:31 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:32:31 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:31 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:32 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:32:32 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:32 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:32 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:32:32 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:32 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:33 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:32:33 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:33 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:33 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:32:33 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:33 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:34 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:32:34 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:34 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:34 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:32:34 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:34 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:35 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:35 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:35 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:35 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:35 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:35 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:36 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:36 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:36 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:36 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:36 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:36 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:38 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:32:38 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:32:39 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:32:39 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:39 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:39 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:32:39 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:39 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:40 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:32:40 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:40 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:40 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:32:40 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:40 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:41 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:32:41 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:41 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:41 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:32:41 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:41 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:42 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:32:42 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:42 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:42 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:32:42 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:42 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:43 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:43 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:43 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:43 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:43 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:43 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:44 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:44 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:44 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:44 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:44 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:44 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:46 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:32:46 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:32:47 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:32:47 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:47 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:47 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:32:47 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:47 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:48 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:32:48 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:48 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:48 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:32:48 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:48 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:49 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:32:49 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:49 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:49 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:32:49 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:49 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:50 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:32:50 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:50 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:50 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:32:50 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:50 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:51 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:51 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:51 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:51 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:51 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:51 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:52 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:52 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:52 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:52 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:52 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:52 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:54 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:32:54 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:32:55 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:32:55 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:55 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:55 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:32:55 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:32:55 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:32:56 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:32:56 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:56 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:56 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:32:56 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:32:56 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:32:57 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:32:57 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:57 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:57 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:32:57 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:32:57 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:32:58 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:32:58 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:58 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:58 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:32:58 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:32:58 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:32:59 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:32:59 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:59 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:32:59 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:32:59 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:32:59 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:00 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:00 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:00 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:00 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:00 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:00 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:02 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:33:02 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:33:03 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:33:03 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:03 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:03 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:33:03 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:03 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:04 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:33:04 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:04 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:04 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:33:04 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:04 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:05 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:33:05 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:05 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:05 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:33:05 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:05 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:06 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:33:06 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:06 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:06 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:33:06 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:06 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:07 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:07 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:07 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:07 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:07 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:07 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:08 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:08 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:08 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:08 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:08 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:08 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:10 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:33:10 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:33:11 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:33:11 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:11 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:11 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:33:11 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:11 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:12 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:33:12 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:12 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:12 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:33:12 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:12 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:13 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:33:13 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:13 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:13 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:33:13 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:13 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:14 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:33:14 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:14 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:14 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:33:14 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:14 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:15 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:15 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:15 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:15 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:15 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:15 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:16 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:16 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:16 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:16 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:16 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:16 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:18 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'POWEROFF' Thu Jul 2 14:33:18 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP POWEROFF 0' Thu Jul 2 14:33:19 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 25' Thu Jul 2 14:33:19 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:19 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:19 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 25' Thu Jul 2 14:33:19 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 64.75dB (asked for 64.75dB) Thu Jul 2 14:33:19 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 25' Thu Jul 2 14:33:20 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 27' Thu Jul 2 14:33:20 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:20 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:20 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 27' Thu Jul 2 14:33:20 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 62.75dB (asked for 62.75dB) Thu Jul 2 14:33:20 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 27' Thu Jul 2 14:33:21 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 29' Thu Jul 2 14:33:21 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:21 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:21 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 29' Thu Jul 2 14:33:21 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 60.75dB (asked for 60.75dB) Thu Jul 2 14:33:21 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 29' Thu Jul 2 14:33:22 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 31' Thu Jul 2 14:33:22 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:22 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:22 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 31' Thu Jul 2 14:33:22 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 58.75dB (asked for 58.75dB) Thu Jul 2 14:33:22 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 31' Thu Jul 2 14:33:23 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=0] command is 'SETPOWER 33' Thu Jul 2 14:33:23 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:23 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=0] response is 'RSP SETPOWER 0 33' Thu Jul 2 14:33:23 2020 DTRXCTRL <0002> Transceiver.cpp:832 [tid=139739153299392][chan=1] command is 'SETPOWER 33' Thu Jul 2 14:33:23 2020 DDEV <0005> UHDDevice.cpp:391 [tid=139739153299392] Set TX gain to 56.75dB (asked for 56.75dB) Thu Jul 2 14:33:23 2020 DTRXCTRL <0002> Transceiver.cpp:980 [tid=139739153299392][chan=1] response is 'RSP SETPOWER 0 33' [0;m
Actions
