Project

General

Profile

Actions

SonyEricssonK200i » History » Revision 13

« Previous | Revision 13/18 (diff) | Next »
fixeria, 11/09/2022 09:17 PM
notes on MMI codes and the RVTMUX


Sony Ericsson K200i/K220i

This is another ODM phone model based on TI Calypso. Both K200i and K220i are identical, except that the K220i has an FM receiver. Interestingly enough, this one has more similarities with Pirelli DP-L10 than with SonyEricssonJ100i, so it's hard to tell who actually designed it for Sony Ericsson. It could have been Foxconn, the same people who designed Pirelli's foray into phones, which would explain the similarity.

k200-front.jpg k200-back.jpg

NOTE: This phone is not supported by OsmocomBB yet. All information is provided for interested developers only.

UPDATE: steve-m submitted a patch adding initial support: https://gerrit.osmocom.org/c/osmocom-bb/+/30051

Specifications

  • GSM 900/1800
  • 46 x 103 x 17 mm, 82g
  • STN 65k, 128 x 128
  • IrDA (infrared) port
  • Camera 0.3MP, 640x480
  • 900mAh Li-Ion battery (BST-37)
  • Ti Calypso/Iota/Rita chipset

Hardware

SE-K200i-PCB1.jpg SE-K200i-PCB2.jpg SE-K200i-fastport.jpg

Large versions: SE-K200i-PCB1.jpg, SE-K200i-PCB2.jpg, SE-K200i-fastport.jpg.

Schematics

We don't have any schematics yet.

GSM Chipset

  • DBB: Ti Calypso Baseband, 751992A model (C035, final DSP ROM version 3606), includes 512kBytes of internal SRAM
  • ABB: Ti TWL3025BZ (Iota)
  • RF: Ti TRF 6151CJ (Rita)
  • RF PA: SKY77318-12

NOR Flash + SRAM

  • SPANSION S71PL129NB0HFW4B (4 MiB XRAM).
    • 128Mbit NOR (16 MByte)
    • 32Mbit SRAM (4 MByte)

Audio ringtone

  • Winbond W56932DYX chip (same W569x family as used in Pirelli DP-L10)

Serial cable

K200i has standard Sony Ericsson Fastport connector. Refer to SonyEricssonJ100i for more details.

Stock firmware notes

Below are some notes related to the stock SE's firmware.

MMI codes

The following MMI codes were found in the firmware dump near the address 0x00223b40:

  • *#06# - no comments, we all know about this one,
  • #*87223564# - this is 'TRACELOG' in T9 (see below),
  • #*3722263# - not sure about '372', but '2263' is likely 'BAND',
  • #*6366794636# - this is 'MEMORYINFO' in T9,
  • #*2438378# - not sure about '243', but '8378' is likely 'TEST',
  • #*3378378# - likely 'FERTEST'.

Enabling the RVTMUX logging

The RVTMUX interface is disabled by default and can be re-enabled using the MMI code #*87223564#, which opens a hidden menu. Select the Trace Log and reboot the phone. You should see the RVTMUX logging now. See also https://www.freecalypso.org/hg/freecalypso-tools/file/tip/doc/Host-tools-overview and https://www.freecalypso.org/hg/freecalypso-tools/file/tip/doc/Rvinterf-tools.

Files (5)
k200-back.jpg View k200-back.jpg 30.8 KB fixeria, 10/27/2022 10:08 PM
k200-front.jpg View k200-front.jpg 36.4 KB fixeria, 10/27/2022 10:08 PM
SE-K200i-PCB1.jpg View SE-K200i-PCB1.jpg 2.48 MB fixeria, 10/27/2022 10:37 PM
SE-K200i-PCB2.jpg View SE-K200i-PCB2.jpg 2.51 MB fixeria, 10/27/2022 10:37 PM
SE-K200i-fastport.jpg View SE-K200i-fastport.jpg 2.14 MB fixeria, 10/27/2022 10:37 PM

Updated by fixeria over 1 year ago · 13 revisions

Add picture from clipboard (Maximum size: 48.8 MB)