Project

General

Profile

Actions
History

Wiki » User-Contributed Tutorials »

Ettus USRP B2xx family » History » Revision 1

Revision 1/26 | Next »
Anonymous, 02/19/2016 10:47 PM

This page will describe how to install and configure OpenBSC, Osmo-BTS, Osmo-TRX, Osmo-PCU and OpenGGSN to create an opensource 2G/GSM network with your Ettus USRP B200/B210 SDR hardware.

This page in under development, please stay tuned.

Pre-Req:

The following guide is created on Ubuntu 14.14.03 LTS 64bit with kernel 3.19.0-26-lowlatency

Files (6)
ggsn.conf ggsn.conf 529 Bytes GGSN config file, put it to /etc/ggsn.conf , 09/23/2015 04:07 PM
extensions.conf extensions.conf 1.5 KB Asterisk config file, put it to /etc/asterisk/extensions.conf , 09/23/2015 04:08 PM
osmo-pcu.cfg osmo-pcu.cfg 1.04 KB Example Osmo-PCU config file , 09/23/2015 04:09 PM
sgsn.conf sgsn.conf 1.12 KB Example Osmo-SGSN config file , 09/23/2015 04:09 PM
openbsc.conf openbsc.conf 3.98 KB Example OpenBSC config file , 09/23/2015 04:09 PM
osmo-bts.cfg osmo-bts.cfg 593 Bytes Example OsmoBTS config file laforge, 04/12/2017 01:09 PM

Updated by about 8 years ago · 1 revisions

Add picture from clipboard (Maximum size: 48.8 MB)