BinTec BIANCA BRICK-XMP » History » Version 1
roox, 01/03/2023 10:36 PM
1 | 1 | roox | h1. BinTec BIANCA/BRICK-XMP |
---|---|---|---|
2 | |||
3 | {{toc}} |
||
4 | |||
5 | The "BIANCA/BRICK-XMP":https://web.archive.org/web/20001120062700fw_/http://www.bintec.de/gb/prod/bibrxmp.html is a ISDN PRI Corporate Access Router (RAS server) made by "BinTec":https://web.archive.org/web/20010225224616/http://www.bintec.de/gb/bintec/index.html that |
||
6 | |||
7 | * terminates one 1E line (30 B-channels) |
||
8 | * provides ISDN dial-up on those channels |
||
9 | * provides DSP based modems in case analog modem calls should be handled. |
||
10 | * supports remote CAPI (CAPI over TCP) |
||
11 | |||
12 | Manual |
||
13 | * attachment:BIANCA_BRICK_XMP-Getting_Started.pdf |
||
14 | * attachment:BIANCA_BRICK_XMP-Users_Guide_Hardware-and-Installation.pdf |
||
15 | |||
16 | |Power Consumption|~30W| |
||
17 | |RS232 Connector|DB9| |
||
18 | |E1 Connector|RJ45| |
||
19 | |ETH Connector|RJ45| |
||
20 | |||
21 | h2. Hardware |
||
22 | |||
23 | h3. External pictures |
||
24 | |||
25 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-front1.jpg)}} |
||
26 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-front-detail1.jpg)}} |
||
27 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-front-detail2.jpg)}} |
||
28 | |||
29 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-back1.jpg)}} |
||
30 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-label1.jpg)}} |
||
31 | |||
32 | h3. Open Case |
||
33 | |||
34 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-module-slots2.jpg)}} |
||
35 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-open-perspective1.jpg)}} |
||
36 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-open-perspective3.jpg)}} |
||
37 | |||
38 | h3. Power Supply |
||
39 | |||
40 | 200W FORTRON/SOURCE FSP SPI-200G AT PC power supply |
||
41 | |||
42 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-power-connector.jpg)}} |
||
43 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-case-power-supply.jpg)}} |
||
44 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-power-supply.jpg)}} |
||
45 | |||
46 | h3. Connector Board |
||
47 | |||
48 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-bxmp-int2.jpg)}} |
||
49 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-bxmp-int-detail1.jpg)}} |
||
50 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-bxmp-int-detail2.jpg)}} |
||
51 | |||
52 | h3. Main Board |
||
53 | |||
54 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-pcb-top1.jpg)}} |
||
55 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-pcb-back1.jpg)}} |
||
56 | |||
57 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-pcb-top-detail1.jpg)}} |
||
58 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-pcb-top-detail2.jpg)}} |
||
59 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-pcb-top-detail3.jpg)}} |
||
60 | |||
61 | We can see here |
||
62 | * Motorola MC68EC020 (Microprocessor) attachment:MC68EC020.pdf |
||
63 | * 2x Samsung KM68257C (SRAM) attachment:KM68257C.pdf |
||
64 | * Digital 21143-PC (10/100-Mb/s Ethernet LAN Controller) attachment:21143.pdf |
||
65 | * Quality Semiconductor QS611 (10/100BaseTX Symbol Transceiver) attachment:QS611.pdf |
||
66 | * Xilinx XC5204 (FPGA) attachment:XC5200.pdf |
||
67 | * 2x Xilinx XC9572 (CPLD) attachment:XC9572.pdf |
||
68 | * 2x Fujitsu MB84256C (SRAM) attachment:MB84256C.pdf |
||
69 | * Motorola ACT574 XAB9802 |
||
70 | * Motorola ACT244 XAD9750 |
||
71 | * Motorola ACT08 XAA735 |
||
72 | * Siemens PEB 20320 H V3.2 (Multichannel Network Interface Controller for HDLC) attachment:PEB20320.pdf |
||
73 | * Siemens PEB 2236 N IPAT V2.1 (ISDN Primary Access Transceiver) attachment:PEB2236.pdf |
||
74 | * Siemens PEB 2035 N ACFA V4.1 (Advanced CMOS Frame Aligner) attachment:PEB2035.pdf |
||
75 | * Epson RTC 72423 (Real Time Clock) attachment:RTC72423.pdf |
||
76 | * CR2032 3V battery |
||
77 | * 4x Samsung (DRAM) attachment:KM416C1200CJ.pdf |
||
78 | * Sharp LH28F016SCHT-L95 (Flash Memory) attachment:LH28F016SCHT.pdf |
||
79 | * 2x Xilinx XC3130A (FPGA) attachment:XC3000.pdf |
||
80 | |||
81 | h3. Modem Board |
||
82 | |||
83 | "FM-8MOD":https://web.archive.org/web/20001120145400fw_/http://www.bintec.de/gb/prod/fm-8mod.html |
||
84 | |||
85 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-fm-8mod-top1.jpg)}} |
||
86 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-fm-8mod-top-detail1.jpg)}} |
||
87 | {{thumbnail(BinTec_BIANCA_BRICK_XMP-fm-8mod-bottom1.jpg)}} |
||
88 | |||
89 | top side |
||
90 | |||
91 | * Motorola MC68EC020 (Microprocessor) attachment:MC68EC020.pdf |
||
92 | * Xilinx XC5204 (FPGA) attachment:XC5200.pdf |
||
93 | * 8x Rockwell L2600-17 (Modem Controller) |
||
94 | * 8x Rockwell RC56DDP (Modem Digital Data Pump) attachment:RC56DDP.pdf |
||
95 | |||
96 | bottom side |
||
97 | |||
98 | * 16x G-Link GLT710008 (CMOS SRAM 1M-bit (128K x 8bit)) attachment:GLT710008.pdf |
||
99 | * 4x G-Link GLT725608 (CMOS SRAM (32K x 8 Bit) attachment:GLT725608.pdf |
||
100 | * 4x Fairchild 74ACTQ16245 (16-Bit Transceiver with 3-STATE Outputs) attachment:74ACTQ16245.pdf |
||
101 | |||
102 | |||
103 | h2. Serial Console |
||
104 | |||
105 | h3. Power up |
||
106 | |||
107 | <pre> |
||
108 | ### BIANCA/BRICK-XMP - Start-up ### |
||
109 | |||
110 | Writing DRAM test pattern: ................................ done |
||
111 | Checking DRAM test pattern: ................................ done |
||
112 | |||
113 | Initializing FPGAs : ... done |
||
114 | Starting RTC test : ... done |
||
115 | Starting FLASH Test : ... [0x5e48] done |
||
116 | |||
117 | ### 100Base-T Part ### |
||
118 | Starting chip test (MAC) : ... done |
||
119 | Initializing MAC (Config) : ... done |
||
120 | Initializing MAC (CSRs) : ... done |
||
121 | Starting local DMA test : ............................... done |
||
122 | Starting interrupt test : ... done |
||
123 | |||
124 | ### S2M Part ### |
||
125 | |||
126 | |||
127 | ### BIANCA/BRICK-XMP (Hardware-Rev. 1.2, Firmware-Rev. 1.2) ok ### |
||
128 | |||
129 | |||
130 | Press <sp> for boot monitor or any other key to boot system |
||
131 | </pre> |
||
132 | |||
133 | h3. Bootmonitor |
||
134 | |||
135 | <pre> |
||
136 | BIANCA/BRICK-XMP Bootmonitor (V. 4.9 Rev. 1 from Oct 13 1998) |
||
137 | Copyright (c) 1996 by BinTec Communications GmbH |
||
138 | |||
139 | (1) Boot System |
||
140 | (2) Software Update via TFTP |
||
141 | (3) Software Update via XMODEM |
||
142 | (4) Delete Configuration |
||
143 | (5) Default Bootmonitor Parameters |
||
144 | </pre> |
||
145 | |||
146 | h3. Firmware booting |
||
147 | |||
148 | <pre> |
||
149 | Booting Image from Flash ROM |
||
150 | Checking image ... OK |
||
151 | Writing image to RAM (Release 4.9.3) .................................................OK (2259008 bytes) |
||
152 | Booting BOSS... |
||
153 | |||
154 | |||
155 | BOSS kernel v2.0 (BIANCA/BRICK-XMP) |
||
156 | Copyright (c) 1996 by BinTec Communications GmbH |
||
157 | Version V.4.9 Rev. 3 from 98/12/10 00:00:00 |
||
158 | |||
159 | The system is coming up. |
||
160 | |||
161 | csm_init |
||
162 | CSM_mdm = 0x9a4870 |
||
163 | CSM_ops = 0x9a4a0c |
||
164 | csm_glob = 0xa5c490 |
||
165 | |||
166 | Scanning Mini SBus... |
||
167 | Slot #1: BIANCA/DEC FastEthernet |
||
168 | Slot #2: BIANCA/PMX |
||
169 | Slot #3: BIANCA/MODEM |
||
170 | |||
171 | The system is ready. |
||
172 | |||
173 | AUTOEXEC: |
||
174 | 1 date Mon Oct 31 8:56:12 2022 done |
||
175 | 1 configd SystemId: BXP12926006 done |
||
176 | 10 isdnd background |
||
177 | 11 isdnautocf background |
||
178 | 20 x25swd background |
||
179 | 20 frd background |
||
180 | 21 mpxd background |
||
181 | 50 ipd background |
||
182 | 51 snmpd background |
||
183 | 51 telnetd background |
||
184 | 51 syslogd background |
||
185 | 51 minipadd background |
||
186 | 51 txd background |
||
187 | 60 ipxd background |
||
188 | 61 ripsapd background |
||
189 | 66 httpd background |
||
190 | 69 tud background |
||
191 | 70 routed background |
||
192 | 70 pppd background |
||
193 | 70 radiusd background |
||
194 | 70 tafd background |
||
195 | 80 bridged background |
||
196 | 99 bootpd background |
||
197 | 99 timed background |
||
198 | 99 traced background |
||
199 | 99 isdnlogind background |
||
200 | 99 vcapid background |
||
201 | BOOTP: IP address already set |
||
202 | INFO/CONFIG: system brick-xmp started at Mon Oct 31 8:56:23 2022 |
||
203 | |||
204 | |||
205 | |||
206 | Welcome to BIANCA/BRICK-XMP version V.4.9 Rev. 3 from 98/12/10 00:00:00 |
||
207 | systemname is brick-xmp, location germany |
||
208 | |||
209 | |||
210 | Login: |
||
211 | </pre> |
||
212 | |||
213 | h3. Misc info |
||
214 | |||
215 | Modules |
||
216 | <pre> |
||
217 | > biboAdmBoardTable |
||
218 | |||
219 | inx Slot(*ro) Type(ro) HWRelease(ro) FWRelease(ro) |
||
220 | PartNo(ro) Connector(rw) |
||
221 | |||
222 | 00 0 "BRICK (2/8 MB)" "1.2" "1.2" |
||
223 | "BIANCA/BRICK-XMP auto |
||
224 | |||
225 | 01 1 "BIANCA/CM-100BT" "1.1" "1.0" |
||
226 | "CM-100BT" auto |
||
227 | |||
228 | 02 2 "BIANCA/PMX" "2.1" "3.0" |
||
229 | "CM-PRI" rj45 |
||
230 | |||
231 | 03 3 "BIANCA/FM-MODI-5 "1.2" "4.9.3/Rw:2.0.92" |
||
232 | "FM-MOD-56K/08" auto |
||
233 | </pre> |
||
234 | |||
235 | S2M stats |
||
236 | <pre> |
||
237 | |||
238 | > sysPCMTable |
||
239 | |||
240 | inx Slot(*ro) Unit(*ro) ClockStatus(ro) ClockMaster(ro) |
||
241 | MasterPrio(rw) Changes(ro) |
||
242 | |||
243 | 00 2 -1 not_ready candidate |
||
244 | 0 0 |
||
245 | |||
246 | </pre> |
||
247 | |||
248 | Licenses |
||
249 | <pre> |
||
250 | BIANCA/BRICK-XMP Setup Tool BinTec Communications AG |
||
251 | [LICENSE]: Licenses brick-xmp |
||
252 | _______________________________________________________________________________ |
||
253 | |||
254 | Available Licenses: |
||
255 | |||
256 | IP (builtin), OSPF (valid), STAC (valid), CAPI (valid) |
||
257 | BRIDGE (valid), IPX (valid) |
||
258 | |||
259 | |||
260 | |||
261 | |||
262 | Serialnumber Mask Key State |
||
263 | 119102 311 LEBD3RZ ok |
||
264 | |||
265 | |||
266 | |||
267 | |||
268 | ADD DELETE EXIT |
||
269 | _______________________________________________________________________________ |
||
270 | </pre> |
||
271 | |||
272 | |||
273 | Monitoring und Debugging -> Modem |
||
274 | <pre> |
||
275 | BIANCA/BRICK-XMP Setup Tool BinTec Communications AG |
||
276 | [MONITOR][MODEM]: Modem Calls brick-xmp |
||
277 | _______________________________________________________________________________ |
||
278 | |||
279 | |||
280 | Index Action Type State Mode Modu- Err Compr TX RX ifindex/ |
||
281 | lation Corr Speed Speed BChan |
||
282 | 3000 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
283 | 3001 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
284 | 3002 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
285 | 3003 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
286 | 3004 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
287 | 3005 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
288 | 3006 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
289 | 3007 enabled csm56K idle modem unknown none none 0 0 0/0 |
||
290 | </pre> |
||
291 | |||
292 | SNMP system table |
||
293 | <pre> |
||
294 | brick:> system |
||
295 | sysDescr( rw): "BIANCA/BRICK-XMP" |
||
296 | sysObjectID( ro): (bibo) .1.3.6.1.4.1.272.4 |
||
297 | sysUpTime( ro): 0 06:14:54.00 |
||
298 | sysContact( rw): "BINTEC" |
||
299 | sysName( rw): "brick" |
||
300 | sysLocation( rw): "Germany" |
||
301 | sysServices( ro): 12 |
||
302 | </pre> |