E1 Pinout » History » Version 1
laforge, 11/02/2019 06:09 PM
1 | 1 | laforge | h1. E1 Pinout |
---|---|---|---|
2 | |||
3 | This page tries to summarize various E1 line pin-outs. |
||
4 | |||
5 | |_.Name|_.RJ45 Digium|_.RJ45 Auerswald| |
||
6 | |RxN|1|1| |
||
7 | |RxP|2|2| |
||
8 | |TxN|4|4| |
||
9 | |TxP|5|5| |
||
10 | |UB-|-|7| |
||
11 | |UB+|-|8| |
||
12 | |||
13 | h2. E1 cross-over for Digium |
||
14 | |||
15 | See https://support.digium.com/community/s/article/How-do-I-make-a-T1-E1-Crossover-cable |
||
16 | |||
17 | A T1/E1 crossover cable has pin 1 routed to pin 4 and pin 2 routed to pin 5. |
||
18 | |||
19 | |||
20 | Pin 1 will be the far left pin when holding the plug with the lock-tab facing away from you. Pin 8 will then be the far right pin. |
||
21 | |||
22 | |||
23 | 1 <-> 4 |
||
24 | 2 <-> 5 |
||
25 | |||
26 | The other pairs of the cable should all be routed straight through (the T568A standard may be used as an example for this). |
||
27 | |||
28 | |||
29 | This is not compatible with an Ethernet cross-over cable which swaps 1<->3 and 2<-> 6 (and optionally 4 <->7 and 5 <-> 8). |