EWSD Boot » History » Version 1
nt2mku, 07/18/2024 09:17 AM
| 1 | 1 | nt2mku | h1. EWSD Boot |
|---|---|---|---|
| 2 | |||
| 3 | After turning on the first BAP, the corresponding BCT terminal will display initial boot options. In most cases, you can get the system running with these steps: |
||
| 4 | # Select to continue (and do not run any diagnostics): Enter ";" |
||
| 5 | # Select to boot manually: Enter "MAN;" |
||
| 6 | # System displays discovered APS files on both SCSI drives. |
||
| 7 | ## Select the IOC corresponding to the drive of the desired APS: Enter "IOC-0;" or "IOC-1;" |
||
| 8 | ## Enter the APS file, e.g.: "12341234;" |
||
| 9 | # Force the initialisation of peripherals: Enter "FORCED;" |
||
| 10 | |||
| 11 | System will display "BAP-x is loading APS" now. Afterwards, it loads the software to LTG processors. The terminal will not process any further terminal inputs until completing LTG loading. |
||
| 12 | |||
| 13 | The whole boot process until finishing LTG loading takes about 20 to 30 minutes. |
