Actions
Bug #2415
closedosmo-bts-sysmo sometimes ending prematurely
Start date:
08/01/2017
Due date:
% Done:
0%
Spec Reference:
Description
[0;m19700302111615804 DLINP <0012> input/ipaccess.c:705 received ID get [0;m19700302111615805 DABIS <000d> abis.c:101 OML Signalling link up [0;m[1;36m19700302111615806 DOML <0001> oml.c:301 OC=SITE-MANAGER INST=(ff,ff,ff) Tx STATE CHG REP [0;m[1;36m19700302111615806 DOML <0001> oml.c:301 OC=BTS INST=(00,ff,ff) Tx STATE CHG REP [0;m[1;36m19700302111615807 DOML <0001> oml.c:301 OC=GPRS-NSE INST=(00,ff,ff) Tx STATE CHG REP [0;m[1;36m19700302111615807 DOML <0001> oml.c:301 OC=GPRS-CELL INST=(00,ff,ff) Tx STATE CHG REP [0;m[1;36m19700302111615807 DOML <0001> oml.c:301 OC=GPRS-NSVC INST=(00,00,ff) Tx STATE CHG REP [0;m[1;36m19700302111615807 DOML <0001> oml.c:301 OC=GPRS-NSVC INST=(00,01,ff) Tx STATE CHG REP [0;m[1;36m19700302111615807 DOML <0001> oml.c:301 OC=RADIO-CARRIER INST=(00,00,ff) Tx STATE CHG REP [0;m[1;36m19700302111615808 DOML <0001> oml.c:301 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) Tx STATE CHG REP [0;m[1;36m19700302111615808 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,00) Tx STATE CHG REP [0;m[1;36m19700302111615808 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,01) Tx STATE CHG REP [0;m[1;36m19700302111615808 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,02) Tx STATE CHG REP [0;m[1;36m19700302111615808 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,03) Tx STATE CHG REP [0;m[1;36m19700302111615809 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,04) Tx STATE CHG REP [0;m[1;36m19700302111615809 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,05) Tx STATE CHG REP [0;m[1;36m19700302111615809 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,06) Tx STATE CHG REP [0;m[1;36m19700302111615809 DOML <0001> oml.c:301 OC=CHANNEL INST=(00,00,07) Tx STATE CHG REP [0;m[1;36m19700302111615811 DOML <0001> oml.c:528 OC=BTS(01) INST=(00,00,ff) [0;m[1;36mRx GET ATTR [0;m[1;36m19700302111615812 DOML <0001> oml.c:266 OC=BTS INST=(00,ff,ff) Tx Get Attribute Response [0;m[1;36m19700302111615853 DOML <0001> oml.c:528 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) [0;m[1;36mRx GET ATTR [0;m[1;36m19700302111615853 DOML <0001> oml.c:266 OC=BTS INST=(00,ff,ff) Tx Get Attribute Response [0;m[1;36m19700302111615854 DOML <0001> oml.c:250 O&M Get Attributes [0], Manufacturer Dependent State is unsupported by BTS. [0;m[1;36m19700302111615855 DOML <0001> oml.c:984 OC=RADIO-CARRIER(02) INST=(00,00,ff) [0;m[1;36mRx OPSTART [0;m[1;36m19700302111615857 DOML <0001> oml.c:736 OC=RADIO-CARRIER(02) INST=(00,00,ff) [0;m[1;36mRx SET RADIO CARRIER ATTR [0;m[1;36m19700302111615857 DOML <0001> oml.c:768 Set RF Max Power Reduction = 0 dBm [0;m[1;36m19700302111615857 DOML <0001> oml.c:430 Sending FOM ACK. [0;m[1;36m19700302111615859 DOML <0001> oml.c:1012 OC=RADIO-CARRIER(02) INST=(00,00,ff) [0;m[1;36mRx CHG ADM STATE [0;m[1;36m19700302111615859 DOML <0001> oml.c:1038 ADM state already was Unlocked [0;m19700302111615859 DL1C <0006> l1_if.c:1397 Tx RF-MUTE.req (0, 0, 0, 0, 0, 0, 0, 0) [0;m19700302111615859 DL1C <0006> l1_if.c:184 Tx SYS prim MUTE-RF.req [0;m19700302111615860 DL1C <0006> l1_if.c:1370 Rx RF-MUTE.conf with status=Success [0;m19700302111615860 DL1C <0006> main.c:115 Set global status #1 to 0 (0001 -> 0001), LEDs: ACT 1 [0;m[1;36m19700302111615862 DOML <0001> oml.c:984 OC=RADIO-CARRIER(02) INST=(00,00,ff) [0;m[1;36mRx OPSTART [0;m19700302111615862 DL1C <0006> oml.c:423 Init TRX (ARFCN 0, TSC 0, RxPower -75.000000 dBm, TxPower 0.00 dBm [0;m19700302111615863 DL1C <0006> oml.c:343 Rx MPH-INIT.conf (status=Invalid parameter) [0;m19700302111615863 DL1C <0006> oml.c:348 Rx MPH-INIT.conf status=Invalid parameter [0;m[1;36m19700302111615863 DOML <0001> bts.c:208 Shutting down BTS 0, Reason MPH-INIT failure
Attached run archive with failure details.
Issue appeared in test: aoip_sms:sysmo.mo_mt_sms.py
To be checked if it's AoIP specific or not. Let's monitor osmo-gsm-tester-run jenkins job for followups on this issue.
Files
Related issues
Actions
