Actions
Feature #4295
closedsupport for executing srsENB on USRP B2xx hardware
Start date:
12/02/2019
Due date:
% Done:
80%
Spec Reference:
Description
we'd have to parametrize settings like
- eARFCN
- gain values ({rx,tx}_gain)
- enb_id, cell_id, phy_cell_id
- bandwidth (n_prb)
- MCC/MNC/TAC
- ip address of the S1 interface on the EPC side (mme_addr)
- ip address to bind the S1 interface of the eNB to ({gtp,s1c}_bind_addr)
- logfile
- pcap file
Updated by pespin about 4 years ago
- Status changed from New to In Progress
- % Done changed from 0 to 70
srsENB working now with both UHD, SoapySDr and zmq backends.
Missing: RF related parameters such as: (they are currently hardcoded)
eARFCN gain values ({rx,tx}_gain) enb_id, cell_id, phy_cell_id bandwidth (n_prb)
Updated by pespin about 4 years ago
- % Done changed from 70 to 80
number of prbs is supported now, so only main params missing:
eARFCN gain values ({rx,tx}_gain) enb_id, cell_id, phy_cell_id
Updated by pespin about 4 years ago
- Status changed from In Progress to Resolved
both srsENB and amarisoft ENB are supported now on B2XX device within osmo-gsm-tester. I just submitted patches to add tx/rx_gain missing support for ENB and srsUE:
https://gerrit.osmocom.org/c/osmo-gsm-tester/+/17900 srsue, amarisoft/srsENB: Support setting rx/tx_gain attributes
Resolving the ticket. New ones can be created later with more fine-grained requests if some feature is missing.
Actions