Feature #4295
closed
support for executing srsENB on USRP B2xx hardware
Added by laforge over 4 years ago.
Updated about 4 years ago.
Description
we'd have to parametrize settings like
- eARFCN
- gain values ({rx,tx}_gain)
- enb_id, cell_id, phy_cell_id
- bandwidth (n_prb)
- MCC/MNC/TAC
- ip address of the S1 interface on the EPC side (mme_addr)
- ip address to bind the S1 interface of the eNB to ({gtp,s1c}_bind_addr)
- logfile
- pcap file
- Description updated (diff)
- Status changed from New to In Progress
- % Done changed from 0 to 70
srsENB working now with both UHD, SoapySDr and zmq backends.
Missing: RF related parameters such as: (they are currently hardcoded)
eARFCN
gain values ({rx,tx}_gain)
enb_id, cell_id, phy_cell_id
bandwidth (n_prb)
- % Done changed from 70 to 80
number of prbs is supported now, so only main params missing:
eARFCN
gain values ({rx,tx}_gain)
enb_id, cell_id, phy_cell_id
- Status changed from In Progress to Resolved
both srsENB and amarisoft ENB are supported now on B2XX device within osmo-gsm-tester. I just submitted patches to add tx/rx_gain missing support for ENB and srsUE:
https://gerrit.osmocom.org/c/osmo-gsm-tester/+/17900 srsue, amarisoft/srsENB: Support setting rx/tx_gain attributes
Resolving the ticket. New ones can be created later with more fine-grained requests if some feature is missing.
Also available in: Atom
PDF
