SysmoUSIM-SJS1 » History » Revision 6
« Previous |
Revision 6/21
(diff)
| Next »
laforge, 05/28/2016 12:34 PM
- Table of contents
- sysmoUSIM-SJS1
sysmoUSIM-SJS1¶
The sysmoUSIM-SJS1 is programmable and Java capable USIM card. Not all commands are known yet and this page should grow over time. Each card is using a separate ADM1 key and the default configuration is hacker/developer friendly (fields being writable, reduced security for installing applets to have more quick development cycles).
Please see shadysim.py for a tutorial on installing and removing a SIM Toolkit.
User Manual¶
sysmocom provides a user manual at https://www.sysmocom.de/downloads/sysmousim-manual.pdf
Availability¶
sysoUSIM-SJS1 is available from http://shop.sysmocom.de/ in both 2FF+3FF (micro) and 2FF+4FF (nano) form factors.
Command Reference¶
To understand this reference, it is assumed that you are familiar with basic knowledge on smartcard
technologies, such as standard ISO 7816-3/-4 APDUs and GSM TS 11.11.
The below should be possible to set after authenticating with the ADM1 pin
Setting the IMSI¶
Use a standard UPDATE BINARY command on EF.IMSI (7F20/6F07)
Setting the ICCID¶
Use a standard UPDATE BINARY command on EF.ICCID (2FE2)
Setting the Ki¶
Use a standard UPATE BINARY command on EF.KI (7F20/00FF)
Setting the OP¶
Use a standard UPATE BINARY command on EF.MilenageOP (7F20/00FD)
Setting the OPC¶
Use a standard UPATE BINARY command on EF.MilenageOPC (7F20/00FC)
Setting the Algorithm(s)¶
Use a standard UPDATE BINARY command on EF.AUTH (7FCC/6F00)
Two bytes, first byte for 2G, second byte for 3G.
Value '01' for milenage
Value '03' for COMP128v1 (only allowed for 2G)
Updated by laforge almost 8 years ago · 6 revisions