BildTel 001 » History » Version 21
laforge, 11/13/2023 02:16 PM
1 | 9 | laforge | {{>toc}} |
---|---|---|---|
2 | |||
3 | 1 | laforge | h1. BildTel 001 |
4 | |||
5 | 3 | laforge | The Telekom-branded *BildTel 001* was likely the first commercially available ISDN video phone in Germany. |
6 | 1 | laforge | |
7 | 3 | laforge | {{thumbnail(20231028_114259.jpg,size=400)}} |
8 | {{thumbnail(20231028_114402.jpg,size=400)}} |
||
9 | 1 | laforge | |
10 | 9 | laforge | {{thumbnail(isdn-bildtelefon-picture-alliance-zb-matthias-hiekel-11764519.jpg,size=400)}} |
11 | (Only digital marketing picture I could find online, courtesy of Picture Allianze / Matthias Hiekel) |
||
12 | |||
13 | 20 | laforge | The specific unit I managed to acquire has been with the "Hochschule für Telekommunikation Leipzig (HfTL)":https://de.wikipedia.org/wiki/Hochschule_f%C3%BCr_Telekommunikation_Leipzig until its closure in 2022. |
14 | |||
15 | 1 | laforge | h2. Architecture |
16 | |||
17 | The system consists of the following parts: |
||
18 | 2 | laforge | * A TV screen with built-in [[BTX__Prestel__Videotex__Minitel|BTX]] decoder (inherited from [[LOEWE_Multitel_TV10]]) |
19 | 1 | laforge | * A keyboard + phone-receiver combo (inherited from [[LOEWE_Multitel_TV10]]) |
20 | * A _desktop-computer-like_ box called the Codec (containing the actual ISDN video telephony part, implemented by AEG/OLYMPIA) |
||
21 | * A video camera |
||
22 | |||
23 | The BTX Terminal [[LOEWE_Multitel_TV10]] was used as the "user interface" for the device, adding the _codec_ box to turn it into a video phone. |
||
24 | |||
25 | 10 | laforge | h3. Codec unit |
26 | 4 | laforge | |
27 | {{thumbnail(20231028_114437.jpg,size=400)}} |
||
28 | 6 | laforge | {{thumbnail(20231028_120250.jpg,size=400)}} |
29 | {{thumbnail(20231028_120314.jpg,size=400)}} |
||
30 | {{thumbnail(20231028_120334.jpg,size=400)}} |
||
31 | 8 | laforge | {{thumbnail(20231028_120934.jpg,size=400)}} |
32 | {{thumbnail(20231028_120943.jpg)}} |
||
33 | 4 | laforge | |
34 | 13 | laforge | The Codec unit ("Bildeinheit") consists of a variety of different circuit boards: |
35 | 1 | laforge | * 1x power supply |
36 | * 4x "mainboards" stacked on top of each other (two sandwiches of two PCBA) |
||
37 | 20 | laforge | ** top two boards (CODER / DECODER) have a number of DIN 41612 slots for plug-in cards |
38 | * 6x CODEC ADSP boards plugged into slots of the CODER |
||
39 | * 3x CODEC ADSP boards plugged into slots of the DECODER |
||
40 | * 1x OUTDIG/OUTANA sandwich, consisting of two PCBA plugged into slots of the DECODER mainboard |
||
41 | 13 | laforge | ** this is the TV output board, generating and digital-analog-converting analog TV signal |
42 | 20 | laforge | * 1x INDIG/INANA sandwich, consisting of two PCBA plugged into slots of the CODER mainboard |
43 | 13 | laforge | ** this is the camera input board, receiving and digitizing the analog TV camera signal |
44 | 1 | laforge | |
45 | h4. AEG-OLYMPIA CODEC ADSP |
||
46 | 13 | laforge | |
47 | 20 | laforge | This board exists 9 times in total (6x for CODER, 3x for DECODER). It hosts a digital signal processor, RAM and some FIFOs. |
48 | 13 | laforge | |
49 | 20 | laforge | There are no visible differences between the boards; also the label on the GAL is identical. |
50 | |||
51 | 13 | laforge | PCB Marking: @1601914L11T@ |
52 | Connector Marking: None |
||
53 | |||
54 | {{thumbnail(20231030_105751.jpg,size=400)}} |
||
55 | {{thumbnail(20231030_105725.jpg,size=400)}} |
||
56 | {{thumbnail(20231030_105648.jpg,size=400)}} |
||
57 | |||
58 | |||
59 | |ADI ADSP-2101|Digital Signal Processor| |
||
60 | |VX-8111 10.0000 MHz|Crystal Oscillator| |
||
61 | |GAL20V8A (4012-001/2)|GAL| |
||
62 | |2x IDT 7201SA25J|FIFO| |
||
63 | |2x IDT 7202SA25J|FIFO| |
||
64 | |3xCY7C199-45VC|RAM| |
||
65 | |||
66 | * GAL image: attachment:bildtel001-aeg_olympia_codec_adsp_4012-001_2_GAL20V8A.jed |
||
67 | |||
68 | h4. AEG-OLYMPIA OUTDIG |
||
69 | |||
70 | PCB Marking: @2401913L1T@ |
||
71 | Connector Marking: @35.103-3030.2 SN. 3051@ |
||
72 | |||
73 | top PCBA: |
||
74 | 14 | laforge | |
75 | {{thumbnail(20231030_110051.jpg,size=400)}} |
||
76 | 13 | laforge | |
77 | |||
78 | 1 | laforge | |Brooktree Bt101|Triple 8-bit VIDEODAC| |
79 | 13 | laforge | |Xilinx XC2018-100|FPGA 100 CLBs, 1000 Gates| |
80 | |S-Data SXO-300C 27.00000 MHz|Crystal Oscillator| |
||
81 | |3x IDT 7201SA25J|FIFO| |
||
82 | |||
83 | 20 | laforge | h4. AEG-OLYOMPIA OUTANA |
84 | 13 | laforge | |
85 | 20 | laforge | TBD |
86 | 15 | laforge | |
87 | h4. AEG-OLYMPIA INANA |
||
88 | |||
89 | This is the analog input board. |
||
90 | 16 | laforge | |
91 | PCB Marking: @0202914L1T@ |
||
92 | Connector Marking: @35.103-3023.8/01@ |
||
93 | 18 | laforge | |
94 | 19 | laforge | {{thumbnail(20231030_214231.jpg,size=400)}} |
95 | 18 | laforge | {{thumbnail(20231030_214141.jpg,size=400)}} |
96 | 15 | laforge | |
97 | h4. AEG-OLYMPIA INDIG |
||
98 | |||
99 | This is the digital input board, containing the video ADC and support circuitry |
||
100 | |||
101 | PCB Marking: @0202915L1T@ |
||
102 | 1 | laforge | Connector Marking: @35.103-3020.2/01@ |
103 | 17 | laforge | |
104 | {{thumbnail(20231030_214057.jpg,size=400)}} |
||
105 | {{thumbnail(20231030_214157.jpg,size=400)}} |
||
106 | 15 | laforge | |
107 | |Brooktree Bt253KPJ|Color Video ADC| |
||
108 | |Xilinx XC3030-70|FPGA| |
||
109 | |DOC31CC 27.000M|Crystal Oscillator| |
||
110 | |3x TI TLC272CP|OpAmp; likely buffers for analog R/G/B| |
||
111 | |0900-002/2|SPI flash for FPGA bitstream?| |
||
112 | |3x QSL QS8201-15JR|512x9 FIFO| |
||
113 | 10 | laforge | |
114 | 4 | laforge | h3. TV Camera |
115 | |||
116 | {{thumbnail(20231028_115010.jpg,size=400)}} |
||
117 | 11 | laforge | |
118 | 4 | laforge | h3. TV / BTX Unit |
119 | |||
120 | 7 | laforge | {{thumbnail(20231028_114503.jpg,size=400)}} |
121 | {{thumbnail(20231028_132851.jpg,size=400)}} |
||
122 | {{thumbnail(20231028_133058.jpg,size=400)}} |
||
123 | {{thumbnail(20231028_133103.jpg,size=400)}} |
||
124 | {{thumbnail(20231028_133211.jpg,size=400)}} |
||
125 | 1 | laforge | {{thumbnail(20231028_133255.jpg,size=400)}} |
126 | 11 | laforge | {{thumbnail(20231028_133336.jpg,size=400)}} |
127 | |||
128 | h4. BTX decoder |
||
129 | |||
130 | 4 | laforge | * EPROM image: attachment:bildtel001_tv10_btxdecoder_16772_074_349_27C010.bin |
131 | 10 | laforge | |
132 | 4 | laforge | h3. Keyboard/receiver unit |
133 | |||
134 | {{thumbnail(20231028_114558.jpg,size=400)}} |
||
135 | {{thumbnail(20231028_114639.jpg,size=400)}} |
||
136 | |||
137 | {{thumbnail(20231028_141412.jpg)}} |
||
138 | 5 | laforge | {{thumbnail(20231028_142128.jpg)}} |
139 | {{thumbnail(20231028_142246.jpg)}} |
||
140 | 4 | laforge | {{thumbnail(20231028_142251.jpg)}} |
141 | 9 | laforge | |
142 | Actual Cherry keyboard PCBA after full disassembly, ultrasonic cleaning of all keycaps and lots of isopropanol on the PCB, removing what might be decades old coke residue: |
||
143 | {{thumbnail(20231029_093033.jpg,size=400)}} |
||
144 | 12 | laforge | |
145 | * EPROM image: attachment:bildtel001_keyboard_74E84.251U22g_1.0.0_010389_M2764A.bin |
||
146 | 10 | laforge | |
147 | 1 | laforge | h2. Connections |
148 | 10 | laforge | |
149 | 1 | laforge | h3. Codec unit |
150 | |||
151 | * connects to ISDN basic-rate S0 interface using 8P8C/RJ45 plug |
||
152 | * has two proprietary connectors for attaching video cameras |
||
153 | * has two SCART connectors (one for audio/video output to the TV) |
||
154 | * has a TAE jack for attaching an analog phone for the audio port (connected to the combined keyboard/receiver unit by default) |
||
155 | * has another TAE jack (purpose unknown) |
||
156 | * has a V.24 interface on a SUB-D 9 connector which connects to the built-in BTX decoder of the TV unit |
||
157 | 10 | laforge | |
158 | 1 | laforge | h3. TV Camera |
159 | |||
160 | * connects to the Codec unit using a proprietary high-density connector that appears to carry both video and power |
||
161 | 10 | laforge | |
162 | 1 | laforge | h3. TV unit |
163 | |||
164 | * has an RF input for TV broadcast signals (PAL) |
||
165 | * has a SCART input for baseband audio/video from peripherals (like the Codec unit) |
||
166 | * has a DIN speaker output for attaching an external speaker |
||
167 | * has a built-in BTX decoder with |
||
168 | ** an unused DIN port intended to connect to the [[DBT-03]] BTX-Modem (not used in the ISDN video application) |
||
169 | ** an unused centronics port |
||
170 | ** an auxiliary V.24 port on a DIN connector interfacing the SUB-D 9 of the Codec unit |
||
171 | 10 | laforge | |
172 | 1 | laforge | h3. Keyboard/receiver unit |
173 | |||
174 | 9 | laforge | * has a cable with TAE connector attached (connects to codec unit) |
175 | |||
176 | 21 | laforge | h2. History |
177 | |||
178 | The information below is based on a 2023 conversation between Harald Welte and Roland Gaidzik (project manager of the AEG-OlYMPIA Video Phone). |
||
179 | |||
180 | Prior to the _Bildtel 001_, there was a research project by Daimler-Benz in Ulm, who developed the codec and created a much larger prototype using a VME-bus computer. |
||
181 | |||
182 | The task of the AEG-Olympia (by then also already a Daimler subsidiary) was to translate that research into an actual product that can be produced and sold. The result was the _Bildtel 001_. |
||
183 | |||
184 | * More than 100 units (possibly multiple hundreds, but certainly less than 1000 units) were built. |
||
185 | ** Most of them were purchased by Bundespost |
||
186 | ** a few were given as loner/rental devices |
||
187 | ** probably less than 10 were ever sold directly by AEG-Olympia to other custmers |
||
188 | * Stollmann (in Hamburg) was responsible for building all the electronics (of the video/codec unit) |
||
189 | * The ISDN call control and user interface handling was developed by AEG-Olympia in Konstanz |
||
190 | ** 4 people working in Marketing for the product |
||
191 | ** 7 peopel working on R&D |
||
192 | * Actual assembly of te final product happened at the AEG-Olympia factory in Wilhelmshaven |
||
193 | * Testing/approvals done at a FTZ Facility |
||
194 | * The Codec part (even for the final product) was still provided by the research team in Ulm |
||
195 | * It is expected/assumed, that the Bildtel 001 already implements the ITU-T H.320 standards, as there was strong desire for this by Bundespost |
||
196 | * The _LOEWE MultiTel TV10_ is used almost without modifications. Only very minor softare modifications were made |
||
197 | ** It is not expected that the actual BTX/CEPT decoder is used in the product. The UI is generated by the codec unit and presented as analog RGB on the SCART to the TV |
||
198 | ** The BTX/CEPT decoder likely simply passes through the keyboard input to the V.24 interface towards the codec unit |
||
199 | * The power supply was a standard industrial power supply bought on the market |
||
200 | * The video camere was a standard part bought on the market |
||
201 | |||
202 | As AEG-Olympia went out of business and shut down, the responsibility of the _Bildtel 001_ was passed on to Dornier (back then also another subsidiary of Daimler-Benz). Apparently the Bundespost was very much encouraging Daimer-Benz to keep that project alive and not let it die together with AEG-Oympia. |
||
203 | |||
204 | |||
205 | |||
206 | 9 | laforge | h2. Further Reading |
207 | |||
208 | 1 | laforge | * "Thread on the fediverse covering the BildTel 001":https://chaos.social/@LaF0rge/111317641831468838 |